Shtroblenie concrete walls - what is it for?
Shtroblenie walls - a process that is aimed at making cavities and channels for the installation of electrical wiring, installation of sockets and so on. To perform this process, you need skills in using some tools. Stroblenie can be done with a shot cutter, perforator or bulgarian. This process is not only complicated, but also leads to the formation of a large amount of dust, so it is necessary to do this in the early stages of repair. If the slaughtering is still necessary, when the repair has already been done, it is useful to use a special construction vacuum cleaner, which will collect dust.
Before starting work, it is necessary to familiarize yourself with the room plan to determine which walls are carriers. When you decide to start stroblenie, remember that there are cases when it is forbidden to do this. This applies to wall joints, floors, walls, which are associated with a ladder-lift unit. Unauthorized shtroblenie can cause damage to the structure of the building and lead to its partial destruction.
Note! If the integrity of the wall can not be violated, the wiring can be placed in special plastic boxes.
How to punch a concrete wall with a puncher?
Structuring of concrete walls can be performed in several ways. For one of the methods you need: a perforator, a drill for concrete, a scoop, goggles and a respirator. This method can be used to make small grooves for the cable. Procedure:
- Strokes are generally made horizontally or vertically, so the first thing a pencil is doing is marking;
- A drill with the same diameter as the groove diameter should be inserted into the perforator. The tool is engaged in impact and drilling mode;
- A number of holes are made along the marked line;
- Then the borer changes to the blade, and the puncher switches to impact mode, and all holes are connected;
- After this, holes for fixing are made.
Note! Fasteners are different, depending on what will be mounted. So, for an electrical cable a plastic fastener is used for a 6-8 mm drill.
How to penetrate a concrete wall with a Bulgarian
When deciding how to penetrate a concrete wall, you can choose another option. A set of tools will be needed the same as in the first method, but in addition to the perforator, the Bulgar is also used. If the tool is able to connect a construction vacuum cleaner, then you can use it. The procedure is as follows:
- Marking on the wall;
- A disc for cutting concrete is installed on the Bulgarian, and two slots are made. The depth of the stunt will hang from the diameter of the disc;
- Then the perforator with the shovel knocks out the concrete between the notches;
- Mounting in progress.
The types of fasteners on the modern construction market are more than enough, so there will be no problems with their choice. The fastening system should be calculated, proceeding from the fact that it is necessary to mount the weights. To drill holes for them you need to use special drills for concrete. Holes with a small diameter can be done on their own, but for large diameters, you will most likely have to turn to specialists with a special tool.
Note! In concrete, there is an armature, which can interfere with making large holes. Without special equipment, it will not be possible to cut them, so if you do not have such tools, you will have to ask for help.