Calculator for calculating brick mortar

click fraud protection

Walls area( m2)

Brick size and masonry:

Single brick, 0.5 brick bricks, wall thickness - 120 mm Single brick, brickwork, wall thickness - 250 mm Single brick, 1.5 brick masonry, wall thickness - 380 mm Single brick, 2 brick brickwork, 510 mm wall thickness Single brick, 2.5 brick bricks, 640 mm wall thickness Brick, one and a half bricks, wall thickness: 120 mm Brickone-and-a-half masonry, brickwork, wall thickness - 250 mm Brick one-and-a-half, masonry in 1.5 bricks, wall thickness - 380 mm Brick one-and-a-half, masonry in 2 brickscha, the thickness of the walls - 510 mm Brick one-and-a-half, masonry in 2.5 bricks, the thickness of the walls - 640 mm Double stone, masonry in 0.5 bricks, the thickness of the walls - 120 mm Double stone, masonry in 1 brick, wall thickness - 250 mmThe stone is double, laying in 1.5 bricks, the thickness of the walls is 380 mm. The stone is double, the brickwork is 2 bricks, the walls are 510 mm thick. The stone is double, the brickwork is 2.5 bricks, the wall thickness is 640 mm. The claydite block, size 200 * 200* 400, wall 20 cm

The strength and durability of the structure depend on the quality characteristics of the cement mortar. Therefore, it is important to acquire in advance all the necessary ingredients for its preparation. Calculation of mortar for masonry is carried out based on the determination of cement consumption, hygroscopic properties of which require accuracy and efficiency of the billet in order to avoid unsuitable mixture.

Calculation of mortar for brickwork depends on the design, type of brick and cement brand identity. As a rule, for the construction of walls of bricks use a mixture, the hardness of which varies within the value of M50, M100.

Calculation scheme for mortar for brick laying

Initially, the preparation of cement-sandy essences provides for the determination of its desired cement brand, the choice of which directly depends on the expected strength of the finished composition. Her class should be two, three times the hardness of the mixture. So, to obtain cement mortar, hardness M100, it is necessary to purchase cement of brand properties M200 or M300.The most rational solution will be the use of the brand M400.Its specific percentage in the preparation of the mixture makes it possible to achieve the required strength factor.

The next step involves calculating the amount of mortar for masonry, which is determined based on a flow rate of 0.25 m3 per square meter.m. brickwork.

Practice shows that for masonry walls, with a thickness of one brick, 0.21 cubic meters will be required.solution. Masonry in two bricks provides for the consumption of 0.23 m3 of cement-sand mixture. It is important to consider, regardless of the type of solution( standard three-component, lime or mixed with plasticizers), the volume flow will be the same. At the same time, the amount of the mixture depends on the structural features of the brick. The hollow version of it will significantly increase the consumption of cement mortar.

Calculator calculation mortar for masonry will allow you to calculate relative to the total volume of the cement mixture. The reliability of the result is determined by the accuracy of indicating the measurement of the size of walls, window and door openings. The presence of concrete wall belts provides for the calculation of their height from common measurements.

For calculation, you need to specify the parameters of the length and height of the walls in meters, the thickness of the masonry, which is determined based on the thickness of the brick.

Building online calculator provides the ability to quickly and easily calculate the rate of cement mortar. Among other things, the definition of brick masonry consumption will allow you to orient in the cost of the masonry and to put the required budget for the construction of the building.

instagram viewer