How to close the pipes in the bathroom

In the process of overhaul, the inevitable question arises: "How to hide pipes in the bathroom?".The urgency of this problem is due to aesthetic requirements. Unplated pipes significantly spoil the interior and give the bathroom room an unattractive appearance. To date, there are many ways in which you can hide the water lines. To make the right choice among such a variety of options it is necessary to focus on the footage and interior of the bathroom, as well as on financial opportunities and personal preferences.

Requirementsto the installation work of

. During disguise work, certain rules must be observed:

1. First of all, it is necessary to provide free access to communications. Otherwise, in the event of an emergency, you will have to break the integrity of the finish in order to eliminate the leak.
2. It is also not recommended to lay pipes with a large number of connections. Such designs will make the routing and placement of equipment more complex.
3. Connections must be made of the same material as the pipes.
4. During the installation process, access options for urgent repairs should be provided. In this regard, in the places of placement of valves and valves it is necessary to make small hatches.
5. In order to avoid condensation on the communications, it is necessary to use insulation materials.

Masking of pipes in the wall

When thinking about how to sew pipes in the bathroom, you should think about the option of masking in the wall. As a rule, this kind of work is carried out at the stage of the initial decoration of the premises, tk.with a cosmetic repair to touch the wall will be much more problematic.

The process of disguising communications is carried out in the following sequence of actions:

1. The first thing to do is markup, according to which the concealment procedure will be implemented.
2. Next, based on these schematic tips, you need to do in the wall strobes. These are small grooves, which in size should match the diameter of the pipes.
3. Due to the possible expansion of hot water and heating pipes, work should be carried out in such a way as to ensure unhindered access to these communications.
4. The pipes are then placed in prepared shtroby and fixed using fasteners.
5. This concludes the bulk of the work. Now you can begin to finish the wall in the places where the pipes are placed.

To prevent possible gusts or leaks in the bathroom, it is recommended to opt for polypropylene pipes or products that do not have threaded connections. The advantage of this option is the ease of execution. But at the same time this method has its drawbacks. The most significant of these is the occurrence of a significant amount of waste. Also, in the event of a leak, it is necessary to remove the lining material from the wall in order to detect and repair the malfunction.

Using furniture

This option is the simplest of all possible methods that allow you to design hidden tubes in the bathroom. At the same time, it is characterized by sufficient efficiency. Plumbing communications are located behind the built-in furniture. In this case, it is worth taking into account some features of this method of disguise:

1. To implement this option, pieces of furniture must be treated with antiseptic and antifungal compounds.
2. In the course of the working process, it is necessary to observe the joint dimensions with maximum accuracy and to secure the fixation of the furniture elements. For example, with the vertical arrangement of water pipe communications, you can use the cabinet-pencil of the necessary parameters. In this case, the rear wall is retracted and the corresponding cutouts are made on the panels at the top and bottom. Such a cabinet will bring a double benefit. In addition to its direct purpose, it can also be used to store various things.
3. When choosing furniture it is necessary to make sure that it will retain its performance while staying in a room with a high humidity level. To give furniture moisture-proof properties, you can use a special protective material, but this will entail additional costs. It is worth such material is not cheap.

How to close pipes in the bathroom by re-planning

The main advantage of this method is aesthetics. However, the whole process inevitably entails certain difficulties:

1. The redevelopment involves additional financial costs.
2. In addition, this process is quite laborious, since it takes a lot of effort and time to implement it.
3. Another negative aspect is the reduction of space. As a rule, bathrooms do not have a large footprint, and after the redevelopment works, the size of the premises will become even smaller.

But at the same time changing the layout will allow you to get special niches that, in addition to masking the pipes, can also be used to place a washing machine or a washbasin. Close communications in such a niche can be by using a cladding or a special screen. Also, with this option of hiding the pipes, they will be easily accessible.

How to close the pipes in the bathroom. Photo:

How to sew pipes in the bathroom in the floor

This masking method allows you to hide the pipes in the most aesthetic way, and also save scarce space in the bathroom. However, it has certain shortcomings, the elimination of which will require additional labor. The main aspects are as follows:

1. In the event of an emergency, when placing pipes in the floor, the lower apartment will be flooded. To exclude such consequences, the grooves in which the pipes are placed need to be additionally protected from moisture. This can be done with mastic or ground composition. These measures will avoid or minimize unpleasant consequences in the event of a rush.
2. You also need to take care of the soundproofing. Placed on the floor of the pipes will create a certain noise for the neighbors. It should be remembered that for the location of soundproof materials, the grooves will need to be increased in size, and this will weaken the structure.
3. If you lay the communication in the screed you can significantly reduce the strobilenie. In places where the pipes are loaded( for example, a bathtub or washing machine is installed), communications can be deformed. To prevent this from happening, it is necessary to use an armature.

How to hide pipes in the bathroom with the

box The box is the most practical way of masking communications that will provide unhindered access to pipes along with a high aesthetic design. It can be made on the basis of various materials. For this purpose, use a lining, chipboard, plywood. However, the most popular is drywall. Its popularity is promoted by a number of advantages, which this material possesses:

• ease of installation;
• availability;
• variation in design;
• practicality;
• longevity;
• easy to repair.

There are no toxic or radioactive components in the gypsum boards, so the material does not pose a health hazard. If necessary, the dismantling of gypsum board material will cost significantly less than removing, for example, stone tile or tile.

So, to build a box with your own hands it is necessary to prepare the following:

• gypsum plasterboard material;
• metal profile or wooden bars;
• knife for cutting plasterboard;
• screws and dowels;
• hammer;
• drill;
• screwdriver;
• level;
• plumb line;
• measuring tape;
• tape for depreciation;
• mounting foam;
• putty.

If you have metal communications installed, then before the installation of the box they must be processed in a certain way, as after the end of the work the access to the communications will be closed. To do this, remove the old paint layer from the pipe surface and apply a new one. This will prevent the formation of rust. It should be borne in mind that the installation of the box can only be done after the paint has dried. When working with plastic pipes, this training is not necessary.

Also, before you start working, you need to make measurements. It should be remembered that pipes and gypsum board must separate the distance not less than 10 cm. At this stage, the required number of profiles is determined.

There are two options for mounting the box: with two and three walls. Let us consider each of them in detail.

To form two walls, two plasterboard sheets and three units of profile must be prepared. The work should begin with the installation of side profiles:

1. Initially, it is necessary to determine the height of the wall and, based on the result obtained, cut off the profile fragments.
2. Further with the help of a drill in the wall holes are made, into which profiles are fixed by means of screws or dowels.
3. In the next step, you can proceed to install the first wall. Beforehand, you need to adjust the size of the sheet. The work is carried out as follows:

• material is laid on the floor, where the ruler determines its dimensions;
• in the presence of protruding edges from them should be disposed of with a knife for gypsum board;
• material should be cut from the side of the paper, after which the sheet breaks easily;
• , in order to form an edge, a third profile must be attached to this wall.

1. The second wall is then installed. It must be placed so as to block the first structure, touching the edge.
2. The second sheet is fixed by means of screws. This completes the installation work, now you need to give the box aesthetic appearance. For this, the edges are ground with an abrasive float. As a decor for a gypsum plasterboard box is good for tiles.

Three-wall construction is assembled in the following order:

1. Two profiles are mounted on the wall.
2. Further from gipsokartonnogo a material it is cut out two sheets of the identical sizes which establish in profiles and fix by means of self-tapping screws.
3. Then the profiles are attached to the ceiling and floor. They put in the stands, which will perform the function of the ribs.
4. These racks are fixed to the side walls and guide profiles.
5. Next you need to measure and install the third wall. On this the design is ready.

Disguise with the

screen Today, at specialized points of sale, you can find a screen that is specifically designed to hide pipes. The structure is a frame with two guides. It is fastened to plasterboard or plastic panels.

Due to its low cost the screen is quite affordable for a wide range of consumers. At the same time, it has good aesthetic qualities, is easy to install and, if necessary, is removed without much effort. When installing this screen will use a certain amount of useful space, but it still does not significantly affect the footage of the room.

The screen can be made with your own hands. To do this, you need 4 bruska, corners and screws. The construction process looks like this:

1. In the bar, by means of which the construction will be fixed to the wall, two holes must be made.
2. Then the frame with the smaller side is fixed to the base of the wall.
3. Fasteners must be matched to the material of the wall( brick, block, concrete).
4. For the production of panels suitable gypsum cardboard, which has moisture-resistant characteristics.
5. The smaller panel should have the same dimensions as the frame. A large panel should exceed the frame by 56 mm.
6. For cutting panel elements, use a construction knife. When making the panel directly for the bath in the area of ​​the drain pipe, it is necessary to make a hole, to which the door is subsequently fastened by means of hinges.
7. If the panel is made for masking vertical communications, the hole is executed arbitrarily at any place.
8. The two panel parts are then connected by means of screws.
9. This completes the screen. If desired, it can be decorated with mosaics or tiles. You can also make the screen ventilated by drilling holes in it.

Conclusion

When performing repairs in the bathroom, there is a need to hide the water lines. Since the closed pipes in the bathroom significantly transform the interior and make the appearance of the room more attractive, there are several ways to solve the problem. To choose the right option, one should take into account the style direction, in which the bathroom and the space of the room are framed. And also the cost of materials that are used in this or that way.

How to hide pipes in the bathroom. Video masonry tiles on the box: