We study the scheme of the piping of a heating boiler

click fraud protection

We study the scheme of the piping of a heating boiler

There are several schemes for tying the boiler heating, able to ensure its proper performance and quality supply of the necessary heat to all installed in the house heater.

As a rule, single-circuit, double-circuit, wall, floor, gas, electric, and solid fuel boilers can be installed in private houses, and each of them must necessarily have the appropriate piping.

Her scheme can provide for connection with the boiler and hot water, and if the rules and technologies are observed, it can be done by oneself.

Mainly the heating boiler is tied in order to generate the heat generated in the device as efficiently as possible.

To do this, it is necessary to connect the entire distribution network in the house among themselves using a variety of additional devices.

There are several different schemes that can be conditionally divided into basic and emergency ones.

The piping of a gas or electric heating boiler, single-circuit or double-circuit, floor or wall version, as well as solid fuel must be carried out in strict accordance with the developed norms and rules.

In order to do it yourself, you need to be patient and study the relevant documents well.

For more details on how the heating circuit of the boiler is performed in conjunction with the boiler and the hot water heater, see the video below.

  • The basic principles of the binding
  • The installation of the boiler
  • The classic version of the strap
  • The accessories of the strapping
  • The binding recommendations

The basic principles of the binding

The heating piping is designed mainly so that all the equipment used is not subject to overheating,to increase its effectiveness, but also to increase the overall service life.

In addition, the correctly selected strapping scheme allows to increase the safety and reliability of both gas and electric and solid fuel boiler equipment.

Video:

Due to the strapping, it is possible to distribute heat energy as effectively as possible throughout the interior of the house.

If the strapping is done by hand, then in this case it will be possible to save significant financial resources that the master would require for his work.

It should be noted that the correctly selected scheme of the strapping will also eliminate the cost of various automation, which must monitor the operation of the heating system and the hot water system.

Many believe that installing a gas or electric boiler in a house is much preferable to solid fuel.

At the same time, it should be noted that the binding of solid fuel equipment performed according to all the rules will improve its efficiency and even exceed the performance of both gas and electric boilers in some respects.

There are several different binding schemes, and therefore, before you decide on any of them, you should carefully calculate and think through.

The choice of the binding scheme is mainly determined based on the brand of the used heating equipment.

It should be noted that for both a two-loop and a single-loop boiler, any circuit is a closed circuit in which the coolant will be forced to circulate.

Some strapping schemes that you can do yourself, are shown in the photo below.

Photo:

Boiler installation

Before starting to work on the piping of the heating system, it is necessary to perform the installation of the boiler itself in the preliminary stage.

For gas, solid fuel or electric boilers, there are guidelines and installation rules that must be complied with in accordance with safety regulations.

In the place where the installation of the device is planned, a small foundation should be built, on which a sheet of metal or asbestos should subsequently be laid.

Installation of a solid-fuel or electric, double-circuit or single-loop boilers should be carried out slightly below the level at which the radiators are located.

This will increase not only the efficiency of the heating system, but also make its operation more safe.

After installing the boiler, proceed to the chimney equipment.

All its connections must be made as harmoniously as possible to prevent carbon monoxide and other combustion products from entering the interior of the house.

A more optimal air regulation can be obtained if you additionally mount a special hood. It will ensure the necessary inflow and outflow of air masses.

After the boiler is installed and the chimney and exhaust system are installed, it is possible to proceed directly to the harness itself.

Despite the fact that there are several schemes of binding, it is better to do it according to the classical scheme. This will minimize the amount of complex work, and therefore the task of making the strapping will be much simpler.

Classic version of the

harness First, you should carefully examine all available documentation for the equipment, as well as stickers on its case. There must be specified which of the lines is responsible for the supply and removal of the coolant.

Next, proceed to install the collector. For this, it is necessary to take a pipe of the appropriate diameter and connect it to the boiler.

Collector Installation

All other openings on the device, which will not be used during its operation, should be tightly closed with plugs.

The distributor valve must be mounted on the heat transfer medium to the piping equipment.

In the event that in addition to the house has a water-heated floor, it is necessary to install one more similar valve on the outlet branch pipe. It will allow to maintain the desired temperature of the warm floor.

Then proceed to install the pump, which will help ensure the required circulation of the coolant in the system. You can do this in two different ways.

With the first option, it is directly connected to the collector, and in the second way - directly to the control valve.

It is also necessary to install all control devices that will allow you to obtain data on pressure and temperature in the system.

Also necessary are filters and valves, which will help to ensure the correct balance of the sink, and to avoid the airing of the heating system and hot water.

It is recommended to use polypropylene pipes as piping. This solution allows you to perform schemes of absolutely any complexity and is called a strapping polypropylene.

The classic version of this type of circuit can be seen in the photo below.

Strapping scheme

Auxiliary elements of the

strapping To ensure that the entire system functions as efficiently and reliably as possible, it will be necessary to install some additional auxiliaries and accessories.

So, the piping of the boiler with polypropylene, will work more economically and safely if the system provides for the installation of an air vent.

This small device will avoid the pressure drop in the system and remove the formed air plugs from it, and this will increase the heat transfer.

For these purposes it is better to use an automatic air vent. It is able to independently regulate the pressure in the system, and if necessary will release all the accumulated air.

Also experts recommend additionally install a mud maker on the system.

This device is especially necessary for gas and solar boilers, as in these devices, as a rule, heat exchangers with thin channels are installed, and they are very sensitive to various types of dirt.

It is possible to ignore the installation of a mud collector when a circuit with natural circulation is provided.

There are some other additional devices that help make the operation of boiler equipment circuits as efficient as possible. More details about them can be obtained from professional specialists.

Recommendations for the

harness Any of the systems that can be used for a boiler must also include an emergency scheme.

This will enable the heating system to work even in the event that any unforeseen situation occurs, for example, electrical energy ceases to flow.

This scheme has its own subtleties and nuances that make it possible to ensure the efficiency of the boiler under any conditions.

More details on how to independently perform an effective binding of the boiler installed in the house are detailed in the video below.

Video:

To perform the piping of domestic boiler equipment, it is necessary to approach responsibly.

You should carefully study all the documentation that comes with the equipment, as well as read the recommendations of specialists.

The overall efficiency of the heating system in the house depends on the quality of the work done and the correctly selected strapping schemes.

instagram viewer