What are the disadvantages of poor fixing of heating communications

click fraud protection

What is a "buzz" in the batteries

Incorrect installation, violation of the rules for the operation of the heating system and some other factors invariably give rise to a number of problems:

  • a reduction in the radial size of the pipe due to the formed inside the raid;
  • leakage of liquid;
  • installation of smaller diameter pipes. What are the disadvantages of poor fixing of heating communications

The first thing to do when a buzz occurs is to start searching for a leak. If you and your neighbors have everything in order, you probably need to look in the basement of the house, where all communications are concentrated. It is very easy to determine the malfunction, according to the hot steam coming from the pipe or a trickle of water. Leakage may occur due to a loosely closed valve or the formation of a fistula with mechanical damage to the pipe.

Having found a breakdown, it is not necessary to try to solve the problem yourself, it is necessary to apply to the housing maintenance department with the application and wait for the arrival of a qualified specialist.

Due to the reduction in diameter due to:

  • , deposits on the inner surface of the pipe, which significantly reduces its diameter and prevents the passage of water( this applies to metal or cast iron), can cause extraneous sounds;
  • malfunction or incorrect installation of shut-off valves, protecting the system from penetration into it of all kinds of rubbish, rust and other;

A waste of old pipes and valves to modern ones, fully solves this problem. What are the disadvantages of poor fixing of heating communications

Clicking, crackling, tapping and water rushing.

If you hear just the clicks in the pipes, then maybe it's the consequences of system blown-in or small particles of debris getting into it. The ingress of air can also help to cool the water, which is why many houses on the upper floors are equipped with a special Mayevsky crane, through which air is released. What are the disadvantages of poor fixing of heating communications

Another kind of noise is crackling, it usually occurs when small debris or slag gets inside. When water is circulating, they strike against the walls and create a crackling effect. Eliminate it simply - with the help of a hose installed on the tap, water with garbage is merged into a bucket.

Elimination of the knocking of the pipe.

Most often, a knocking occurs due to a sudden change in the temperature of the water. As a result, the metal pipe is deformed, i.e.when the water is heated, it expands, and when it cools, it narrows. This leads to the fact that due to poor mounting on the wall the structure will tap on the bracket. But it is enough to put a rubber gasket between it and the radiator and there will not be any blows.

But if the fastener is tightly attached to the wall, then the sound will be of a completely different kind - creaking.

Condensate on pipes with cold water.

In addition to the fact that metal pipes are the source of all sorts of disturbing stimuli in the living room, they have the property of "sweating."

The flow of cold water pipes is due to the difference in temperature between the outside and inside. As a result, high humidity causes rapid rusting of metal pipes. In consequence, breakaway rust particles, getting into the water, begin to circulate along the system along with it, which again can lead to undesirable sounds. What are the disadvantages of poor fixing of heating communications
As we have found out, both sounds, and sources of their occurrence the diversified. In general, these are obsolete engineering structures with a high degree of wear. In part, this can be corrected by carrying out major repairs with the replacement of all systems. The same part, which is on the balance of public utilities, unfortunately, reduces the effectiveness of such works.

instagram viewer