General information
The forefather of the oven Thermophore was the well-known and long forgotten by the spoiled comfort of the inhabitants of the burzhuyka. On its basis, several furnace variants were created. The company Thermophore produces furnaces:
- heating with water circuit,
- heating and cooking;
- specialized for baths and saunas;
Regardless of the purpose of a particular model, the operating principle of each is the same.
Brief characteristics of heating furnaces Thermophore
Advantages of furnaces Thermoform are as follows:
- All furnaces work on solid fuels, mainly firewood, briquettes, pellets can be used.
- In a firebox completely hermetic, firewood burns for a long time, giving maximum heat effect and burning up to the state of ash.
- Convection pipes are placed directly in the furnace, and the grates due to the fact that they are removable, ensure the flow of oxygen into the combustion chamber.
- After the combustion of firewood, the ash falls through the grate into the ash pan, from which it is easy to remove it even when the kiln is heated.
- The special design of the furnace ensures maximum heating.
- Chamotte brick is laid on the inside surface of the furnace, which provides even greater heat transfer due to the fact that it retains heat for a long time and distributes it more evenly.
- Risks of ignition outside the furnace are minimized.
- The appearance of the furnaces is modern, compact and neat.
- Can be installed in any room, but in compliance with fire safety measures.
- The legs of the structure are provided with holes for screwing it to the floor to avoid falling.
It is not difficult to use such furnaces, especially since each model is accompanied by instructions describing the basic requirements for operation, and devote the user to the intricacies of the device.
For health, a sauna is needed, and for a hot sauna
Thermophore has taken care of the production of furnaces that will be appreciated by lovers of pitting bones with a birch broom. In the arrangement of the bath can not be trifles, this case must be approached carefully and with love. For small steam rooms up to 4 m3, the "Wasp" model is suitable, and "Hekla" will heat up large public baths to 50 cubes. To reach 100 degrees in a therma in winter frosts, you will need to wait 70 minutes, in the summer of the same temperature you can wait for 40 minutes.
The sauna stove differs from the usual ones by the presence of a convection casing protecting it from infrared radiation. In it there are special windows made of heat-resistant glass to see the process of burning and in time to throw up the frying. In furnaces for baths there are handles which do not heat up and do not allow people to burn themselves. The firebox of the furnace is made of heat-resistant chrome-plated steel, which increases the heat transfer and productivity in times. In the bath devices are provided additional compartments designed to fill them with stones to create a real living effect of a Russian bathhouse.
Alternative Thermophore variants
If there is no possibility to purchase a thermoform oven, then pay attention to the furnaces of professor Butakov. This is a successful transformation of burzhujki into modern heating devices, which also work on firewood. It's not for nothing that the line of these stoves is named from the low-power "Gymnazist" to the large and powerful model "Academician" Professor Butakov, as it were, projected his life from "mild nails" to an experienced academician. From the heating and cooking ovens today the most popular for the country houses and small rooms is the Yauza oven. This is an emergency option in case of heat loss.
For more detailed information on the types of industrial furnaces, check out our video.
