Finishing door openings with your own hands

click fraud protection

The finishing of door openings is a relatively new trend in interior design, which is dictated by the desire of homeowners to design a home in an original way.

Contents

    • with clinker tiles
  • offers a wide range of options for the realization of the conceived, as the construction market is filled with variational finishing materials. And all that remains to the owner of the house is to show a little imagination and perseverance. The design tips in this article will help you decide on the idea of ​​decorating a doorway to move away from the banal concept of "clypeus-door".

    The choice of the shape of the opening

    Specialists distinguish several forms of finishing the apertures of the entrance doors. To determine the best option, it is necessary to take into account the height of the ceiling in the room, the style of the interior in the room, the width of the doorway, etc. Some constructions look harmonious only in low rooms, and for others it is necessary to expand the space. Let's consider in more detail the main forms of the door opening.

    1

    portal This construction is the simplest in design, since it implies an aperture in the shape of the letter "P".Often to realize this form, it is necessary to completely remove the door leaf, dismantle the box, clean all structural elements on the surface and perform the finishing by any method. Most often, homeowners use:

    • wooden materials;
    • plastic panels;
    • stone;
    • polyurethane stucco;
    • clinker.

    In this form, any decor will look harmonious. In addition, the portal is the optimal solution for finishing the doorway without a door, which serves as an interior design.

    2

    Arched design

    This is the most interesting form for a doorway from a designer point of view. In addition, the arch has a wide variety of decorative design and is appropriate for openings in narrow corridors of the dwelling. This form allows you to visually expand the space, "facilitate" the interior and give it originality.

    3

    Among the most popular ideas for decoration of arched construction, you can distinguish such:

    1. Classical form - this option is suitable for rooms with ceilings, whose height reaches more than 3 meters. The correct radius of the curvature of the opening should be half the width of the whole groove. For example, if the width of the door leaf is 90 cm, then the arch will occupy at least 45 cm up from the edges of the structure.
    2. An arched opening in the Art Nouveau style is the best option for finishing the opening of the interior door. With this constructive solution, the radius of the bend should exceed the width of the opening, and the corners can be decorated with both sharp and rounded edges.
    3. Romance - this type of arch has a direct arch in the middle of the opening, which is rounded at the edges of the structure. Thus, it resembles a portal, only with more elegant, smooth faces.

    There are also other forms of arches that are less popular and more labor-intensive in performance: asymmetry with a slope to one side, trapezium, ellipse, etc.

    4

    Methods of finishing the opening

    After the landlord has decided on the shape of the doorway,finishing material and style of decoration. In this case, it is necessary to take into account the harmony of the combination with the overall design of the room, since this design is a continuation of the interior styling. Consider the most interesting ways of finishing.

    Stone decoration

    This option of finishing the doorway entrance door is the most popular among the owners of the dwelling. This is quite logical, since artificial or natural material has such advantages as:

    • a wide variety of decorative elements;
    • high resistance to mechanical and physical influences;
    • originality and the ability to experiment with different types of material;
    • versatility, because the stone is harmoniously combined, as with the opening of the entrance door, and interior designs.

    The principle of finishing with this material is similar to the technology of laying ceramic tiles. The only difference is that for the stone it will not be necessary to use a special adhesive compound, which is obtained from a dry mixture and water. For stone decor, you can use "liquid nails" or glue-sealant, which can be purchased at any construction store.

    5

    The door opening is finished with an artificial stone in the following sequence:

    1. The surface must first be prepared. To do this, remove the remnants of the old finishing coating, align the existing irregularities and grooves, as well as zashpatlevat cracks and wall defects.
    2. Then you can start surface treatment with a primer, which will increase the adhesion of the glue and the cladding of the walls.
    3. Pre-lay and group the tiles of the decorative stone so that the material is fully ready for fixation.
    4. If some fragments do not match the size of the opening, trim them and sand the edges with a coarse-grained sandpaper.
    5. Then apply glue to the wall. If you use the adhesive compound "liquid nails", then it is applied directly to each stone tile.
    6. Apply the stone to the surface and press firmly with your hand. Begin the work from the bottom corner of the opening. If there is a door in the doorway, then you should step back from the edge to the width that the clypeus will later take.
    7. If the door leaf is not provided in the structure, then put stone tiles in the corners of the slope as tightly as possible to each other.
    8. Depending on the type of decorative material selected, it is possible to leave or not to leave gaps between the fragments that are subsequently filled with grout.
    9. At the end of the process, treat the stone elements with a stiff brush to remove excess mortar and dust.

    6th

    The technology of laying decorative stone is presented in video:

    Decorating with plastic panels

    As decoration of the doorway, a finishing material such as plastic panels is well suited. They can imitate a different structure of wood, stone, marble, and also have a wide variety of colors. Decoration of the aperture with panels allows emphasizing the severity of the outline of the opening, creating a contrast with the interior decoration of the walls of the room.

    Other features of the paneling include the following:

    • visual expansion of the doorway and raising the ceiling level;
    • material is practical in use, easy to care for and clean;
    • panels have a long service life, and are also not affected by mechanical factors.

    The technology of fastening plastic fragments is quite easy. To fix the panels, it is necessary: ​​

    1. Pre-clean the surface.
    2. Treat primer with primer.
    3. Then apply "liquid nails" to the required part of the wall and press the panel firmly with your hands.
    4. Wait until the glue dries and clean with a dry cloth excess formulation.

    7th

    Decorating with polyurethane stucco

    No less popular method of finishing door openings with your own hands is decorating with stucco. A practical option is a polyurethane compound that is externally identical to gypsum, but is more practical and hardy. This decoration is appropriate for the design of wide doorways, especially in rooms with high ceilings. Other advantages of the material include the following:

    • practicality in operation;
    • is easy to clean;
    • versatility for finishing any surface;
    • possibility of painting in any shade.

    Important! It is worthwhile to carefully calculate the size of the decorative elements, if the finish is made in a narrow room. Otherwise, stucco can clutter up and "heavier" the space.

    OLYMPUS DIGITAL CAMERA

    Finishing clinker tiles

    Often the interior doorways are decorated with clinker. Such material is usually used for exterior decoration of the facade, however, to create a certain style, clinker tiles can be laid around the interior doorway. Among the main features of the material is the following:

    • clinker is extremely resistant to physical and mechanical impacts;
    • has a long service life;
    • no need to care.

    Thus, with the help of decorating the doorway, you can give a living space of originality and bring to life bold ideas. Adhere to the laconism in the finish and take into account the parameters of the space to make the most practical and aesthetic opening.

    I

instagram viewer