We glue windows for the winter

click fraud protection

We glue windows for the winter

Winter, as is known - a phenomenon is inevitable, and therefore many, at some point in its approach, overcomes the question - how to glue windows for the winter.

It goes without saying that the insulation of windows is an extremely important time for preparing for the cold, because every owner of any type of housing strives for its proper comfort and comfort, regardless of the weather that rages outside the window.

It is windows that should be insulated first, because it is through them that literally leaves the lion's share of heat.

Naturally, there are not funds for installing new windows equipped with double-glazed windows, and therefore the insulation of old frames is the only optimal solution in this case.

As is known, wood is extremely susceptible to damp, and therefore over time it undergoes buckling and drying, which, in turn, contributes to the formation of gaps, which are absolutely unnecessary in frames.

In addition, not only wood undergoes changes, but also the glass begins to shift, which invariably leads to the formation of slits.

Often the question of how to glue windows, leads to the fact that our fellow citizens go, so to speak, along the path of least resistance, gluing the listed flaws with paper.

Meanwhile, this decision is not too self-justified, because the paper very soon begins to miss the hated cold.

What can I do to insulate windows?

For the insulation of the windows, it is necessary to open both doors, and then carefully inspect their condition.

So, if the flaps are not loosely attached to the bindings, then the slots on both sides should be smeared using a soft dough-like lubricant.

As for the glasses, they are strengthened by gently hammering the carnations with a hammer.

Video:

To ensure the greatest thermal insulation, it is best to remove the glass from the frames, then install them again or for a double putty, or for oil paint.

Thus, during the seizure of the windows, the folding of the folds is done with paint( a thick layer), after which, without letting it dry out, the glasses are reinserted into place, and the glazing beams are clogged from above, covering with paint.

She, in turn, will eliminate all the cracks.

Often, one can face the fact that the most ideal solution for winter window insulation is the use of tubular profiles for this, i.e.seal pads, differing from each other due to the size and shape.

There are a lot of offers to date, but the best choice is foam polyethylene or rubber seals.

Than to seal windows for the winter?

In how to seal windows for the winter, many rely on the methods of grandfathering, in which, for example, newspapers are used for pasting windows.

Another way is to use for this purpose the tows, rags, foam rubber and cotton wool to plug the slots, after which the joints are sealed using a white cloth with preliminary wetting in a soap solution serving as an adhesive.

The used fabric is barely noticeable on the windows, with neither cold nor wind it misses, and with the arrival of heat it can be easily removed by pulling it off, previously moistened with water.

In this case, the strips can be used more than once, and therefore after washing and drying, you can remove them before the arrival of your hour.

The main disadvantage of this method is its laboriousness and possible peeling off due to temperature changes.

Video:

Answering the question about how to seal windows, you can also select a regular adhesive plaster, often used among the owners.

Meanwhile, this is not very wise, because, by unmasking it in the spring, you risk tearing off a significant piece of paint.

The decision to use thermal paper for insulation is also not too rational, because after a month the maximum will dry, after which the slots will again let the wind and the cold into your house.

The arrival of cold weather is marked by the appearance on sale of a foam rubber self-adhesive tape, inserted between the frames.

This makes a small output, which provides better overlap between the window frame and the frames of the slots.

It's true that the magnitude of the issue can not be exactly predicted, and if foam rubber is not enough, it will not hinder the cold, and if there is a lot, the frame will not be able to close.

That's why this type of insulation is better to use exactly between the frames, which will perfectly cover the access of cold air.

By the way, the use of this and the previous version with a cloth on a soap solution, will help to protect yourself from cold weather without the need to replace old windows with new ones for many winters.

In addition, moving away a little from the topic of window gluing, a good solution is to purchase a vacuum glazing that does not replace the entire window, but it makes it possible to replace the inner glass itself, thereby allowing the necessary tightness.

It is also possible to install a thermally reflective polymer film between the glasses.

instagram viewer