Fence from the metal fence with your own hands

The fence made of metal fence is very relevant nowadays, because it differs from other fences in that you do not need to spend money on material and buy the necessary tools. This fence became topical because it performs the function of protection( the construction of this fence is very easy, but penetration through it is not so easy, because the distance between the grids is close, there are sharp tips), decor, ease and duration of use.

Contents

Required tools
Materials
Installation instructions for fences from metal fences
Fence photos from metal fences
Fence mounting from metal fences

Fences made of metal fences with their own hands will give you great pleasure, as you not only save, but also feelgreat pleasure from the physical work done.

For the construction of the fence you need to consider all the details: starting from the perimeter of the enclosed area, its appearance, the number of building materials and ending with the calculation of the duration of the work.

Required tools

For easy understanding of the construction of the fence from the metal picket fence, you can familiarize yourself with the photo in our article or watch a video that will help in this useful and enjoyable lesson. For the construction of the fence you do not need a lot of tools, but the necessary ones will be:

tool for working with the ground. It will be necessary for you to install poles to support the fence. You will also need a drill or a conventional shovel( for digging pits);
welding machine( for fixing transverse logs, to which will be affixed scaffolds).Welding is the best option for this job( cheap, angry and reliable);
screwdriver( it is necessary for installation of installation of metal-to-frame scaffolds).A screwdriver can also be dispensed with, but this will give you extra worries;
is an auxiliary small tool that must be in all the owners in the arsenal and will be necessary to install a fence of metal fences.

Materials

To install the fence from the metal fence with your own hands, you should be provided with the following materials:

Pipe cross-section 60 x 60 mm( profiled).The design of this fence is quite low in weight, so this section is quite suitable for you and will be able to withstand wind loads.
Profile pipe with a cross section of 20 x 40 mm( needed for the installation of longitudinal logs, thanks to which metal fittings will be attached).
Metal strikethines( manufactured at steel enterprises with a thickness of 0.5-2.0 mm).The metal is covered from above with a special layer, which protects against corrosion, then is painted with paints in the idea of a powder.
Galvanized self-tapping screws( for securing metal fittings to the frame).

INSTALLATION INSTRUCTIONS for fencing from metal fences

When you collect all the tools and materials - you can start installing a fence from a metal fence:

draw a draft of your future fence on paper, because drawing on your drawings, you will do the building process;
we install a skeleton( for this we need a shovel or a drill).We excavate pits, the depth of which is 1000-1500 mm( the depth of freezing of the soil), on the previously marked places.

Between the poles it is necessary to withstand a distance of about 2.5 meters, since the structure will not be stable. Pits for poles in the corners should preferably be deep( they are heavily loaded) and lay rubble and sand on the bottom. The length of the pillars should be calculated so that after you install them, the pins are higher by 100-150 mm. Installation you must start from the posts in the corners and then pour the supports with a solution of cement, sand, rubble or just ready-mixed concrete from the mixer. With the help of a long string of light beams stretched along the entire length, you take the welding machine and weld the profile pipes along the length of the frame. Place welding places. After, the construction is painted and go to the final stage of installation.

Take the screwdriver and fasten the flaps so that the screws are at the longitudinal lag( you choose the distance yourself, but it is worth leaving 100-150 mm from the ground).

We sincerely hope that our article with photos and videos has helped you answer the question of how to make a fence of a metal fence with your own hands.