Characteristics of slate PVC
Slate PVC is resistant to ultraviolet and aggressive environmental conditions. The roof of this material can withstand temperatures from -50 to +60 degrees Celsius. In addition, it combines all the advantages of slate, tile, metal and bitumen. Therefore, it has an aesthetic appearance and is sufficiently durable.
Fiberglass slate has the following features:
- resistance to ultraviolet and solar radiation;
- resistance to environmental influences;
- is durable to impact;
- flexible, you can make a roof arch;
- does not rust;
- is easy to install and easy to handle;
- is resistant to chemicals;
- excellent appearance;
- does not require special care.
In addition, plastic PVC slate has its advantages over other materials:
- moisture resistance;
- low weight;
- emits light;
- low thermal conductivity;
- good sound insulation.
The disadvantage is its fragility, if compared with other materials for the roof.
A variety of plastic slate
Plastic slate is divided in shape into a flat, wavy and trapezoidal. Also, the transparent slate is simple and reinforced with fiberglass, white and colored. A variety of colors allow you to create unique and magical lighting effects. Using such a coating, you can design all kinds of designs that will emphasize modern architectural trends.
Transparent glass fiber-reinforced PVC slate, designed for production of awnings in front of the house, roofs of arbors and canopies, as well as for the installation of light walls. Still such roofing sheets began to be applied and in industrial building.
Fiberglass imparts strength to bumps and bends. This roofing material includes the properties of metal, wood and polymer, that is, greater strength at a low specific weight, it is weatherproof, does not warp. The service life is not less than 10-15 years.
In addition to the above, it should be noted that the slate colored plastic has a high resistance to any weather phenomena: temperature changes, long-term sunlight, wind, degree and snow. No pollution is collected on its surface, so it always has an attractive and well-groomed appearance.
Assembly details
The plastic slat must be laid against the direction of the main wind flow. The second row should be done with offset so that in the middle of the sheet in the second row there is a joint of two sheets of the first row. This method of laying eliminates the overlap of four thicknesses.
In addition, when installing the roof in this way, one corner of the slate can not be cut. If you do not move the rows of sheets, then it will be necessary to cut the angle at 45 °.The capillary groove of each sheet should be covered from above with the next sheet. And the sides are covered by one wave overlapping.
Given all the advantages and properties of plastic roofing material, it can be called unique. Its operation directly depends on competent installation. If it is made according to all the rules, then such a roof or a visor will last a long time, and the owners will have the opportunity to save money.
By choosing such a slate, you can be sure of a high-quality and safe roof covering, which will give pleasure to its reliability.