What are the conditions for using plastic lining?
If you say that this material can be used everywhere, it will be wrong. It can be used only indoors. The reason is that the mechanical strength of this lining is not so high, therefore on facades of buildings it can easily deform. However, for interior finishing is ideal.
It is used for facing the walls and ceiling of the kitchen, bathroom, toilet, utility rooms, balcony and corridor. Such a wide range of its application is explained by its hydrophobicity, that is, it does not absorb water. Because it also suits well for damp rooms( baths, saunas).Many gardeners use it for interior finishing of the attic and cellar.
In addition, it is used for commercial purposes. You probably saw many offices, travel agencies, shops with such walls. Using it in these rooms is also justified by the fact that it is incredibly easy to take care of and, moreover, can be cleaned with almost any detergent.
Properties and characteristics of
It is possible to list the operational properties of this material for quite some time. We will write only about the main. The pluses include: frost, thermal, light, moisture resistance, durability, hygiene, ease of laying, incombustibility, noise insulation. It is also able to conceal the flaws and defects of the walls in a significant way. Of the minuses, only one is singled out: poor resistance to mechanical influences, that is, any impact will leave a mark on the coating in the form of a dent.
If we talk about the characteristics, then the board has plastic dimensions - 100 x 6000 x 10 mm( one panel).Its thickness is about 10 mm on average( there are slightly different parameters for the Eurocup).In this case, each panel is attached to each other, forming a single coating. The temperature range at which this material can be used varies from -40 to +115 ° C.However, it is not recommended that the plastic frost resistant plastic carpet should be used in case of too sharp fluctuations.
Types of of this material are divided into several parameters . By the way of connection is seamless and lining with a seam. By color: has more than 70 shades. Especially popular is the classic white and beige plastic lining. According to the texture: is laminated, for "stone", "sand", "brick" and others. It all depends on the style of the room and the design. For finishing the corridors, a plastic lining under the tree is often used.
How is plastic fixed, lining?
To ensure seamless seamless lining, the wall covering video on our website has been applied perfectly smoothly, a number of recommendations must be followed. Below we list them. Firstly, it is worthwhile to see how equal your ground is. If it has any flaws, then it is worth making a crate. It is created from wooden slats installed perpendicular to the future location of the panels. The distance between the slats should be about 50 cm.
Next we begin to install the material itself, the color of which should be selected in advance. It's better if you get the panels from one lot to avoid the slightest difference in hue. Then proceed to fasten the laths. Begin the laying process from the corner of the room. So gradually fix the bar for the bar. Inserting into sockets or switches is carried out by cutting in the material of the corresponding hole.
You can fasten the lining with the help of construction staples, screws, nails, glue mixture. The choice depends on your personal preferences.