Doors from gypsum cardboard: manufacturing features

click fraud protection

The popularity of gypsum cardboard today is increasing, the scope of this finishing material is also expanding. In construction it is used for the installation of partitions and multi-level ceilings, leveling of walls and their capital warming. Universal properties of drywall sheet make its possibilities unlimited, and due to the cheapness of raw materials, gypsum board is used not only on construction sites, but also for other economic purposes.

Description of the material

  • Description of the material
  • Features and benefits of the GKL constructions
  • Door made of plasterboard with their own hands
  • Door panel with gypsum board
  • Partition made of plasterboard with their own hands
  • Description of the material

    Sometimes I want to diversify the interior of my apartment, to add a touch of novelty, creativity and freshness. For example, replace the old furniture with a more modern one, make a cosmetic repair, or decide on a major redevelopment, dividing a large room with partitions. With the latter will help to successfully cope with a universal in its characteristics and practical drywall. With the help of it you can not only fence off and delimit space, but also design doors from gypsum board.

    1

    Installation of interior doors is now a very popular service in many respects due to the fact that sliding doors made of drywall are a fairly functional design that can also decorate the room and save space.

    Drywall doors, photos of which you can see below, are presented in different stylistic interpretations, and I must say that recently they have been produced quite often.

    810220058

    531

    mezhkomnatnye_dveri_v_penale_620x0_rozmiar-niestandardowy

    Practicality and appearance of such doors are not inferior to traditional designs, but in addition to designing the interior space, drywall is also used as a component of furniture.

    It's easy to work with, besides, it's an easy and pliable material. Special skills during installation are not required, however, as well as a large set of tools. To establish a door from gypsum cardboard or a septum quite by forces with own hands.

    Easy-to-use material can even be waterproof and can be used in the kitchen or in the bathroom. It is not necessary to level the plasterboard walls, and doorways can be designed absolutely of any shape.

    Theoretically, it is easy to make any structure from a gypsum board( GKL), it is important to observe all the nuances of working with this material.

    Features and Benefits of GKL

    Constructions Why is gypsum board used so often for building and household purposes? In fact, this demand is due to its unique features:

    1. Installation of ready-made partitions from gypsum board does not require large financial costs, and raw materials are of low cost.
    2. GCL constructions are characterized by high reliability.
    3. The modern design of any complexity gypsum cardboard will help to realize. In addition, it can be pasted with wallpaper and painted in any color.
    4. The configuration of any room can easily be changed using GCR.They are fastened "on dry", and therefore, their movement is not difficult.
    5. Drywall is the most environmentally friendly building material. Such it is made by the safe components used in the manufacture.
    6. Light weight gypsum plasterboard sheet is as simple as possible for installation.
    7. In addition to the above features, this material has increased sound and energy-saving properties. It perfectly "breathes" and maintains an optimal microclimate in the room.
    8. Flexible gipsokartonny sheet can be cut even with a knife.

    Drawbacks of drywall:

    • almost all types of GCR absorb moisture and are destroyed;
    • in case of inaccurate transportation of this material it can crumble;
    • on gipsokartonnye partitions without a metal frame it is better not to hang heavy objects;
    • sometimes GKL is problematic to lift up the stairs of a multi-storey building.

    installation-door-in-gypsum board-partition

    Types of plasterboard partitions:

    1. Deaf. Their feature is that such partitions are mounted on solid sheets. Such an economical option allows you to design interior partitions in different modern styles.
    2. Partitions with glazing. They are usually used in the arrangement of offices, banking institutions, other organizations, where all the enclosing elements must be viewed.

    Drywall door with own hands

    Before you make a door from gypsum board, you need to choose a suitable place for this and prepare a doorway. For this it is necessary to use a wooden opening reinforced with a metal profile. This is the only way to harden the frame. As the main tools for creating a frame, you should use scissors for metal, screws and screwdrivers.

    Stages of manufacture:

    1. Drywall for interior doors is better to choose a thickness of at least 9.5 mm. For these purposes, even the remnants of the material will fit, since all joints can then be puttied.

    For work you will need:

    • gipsokartonnye sheets;
    • knife, pencil;
    • plane for the edge;
    • self-tapping screws( 25 mm);
    • metal perforated corner.

    Using a pencil and ruler, make a marking on the GCR, then cut it into pieces and align the sections with a planer. Wrapped on both sides of the frame carefully fix the screws so as not to damage the fragile drywall. At the edges of the putty, a perforated metal corner must be attached, which will prevent damage to the door during the operation of the door.

    1. When the corner dries, you can start finishing. Prime the cloth, level with a putty mixture. To ensure that the layer of putty does not appear cracks, treat the joints with a mesh-serpyankoy. Cover the drywall door can be panels, paint or tiles. But before that, make hinges on the door and make holes for the necessary fittings. If you need to further insulate the structure between the sheets of hypsom cardboard, you will receive the help of such materials:
    • polystyrene;
    • glass wool;
    • mounting foam;
    • polystyrene.
    1. Installation of the traditional door on the hinges is done elementary, but to fit the sliding door, you need to take into account a few nuances. In the building store, purchase a special sliding mechanism with instructions. The rail for the door is usually fixed to the floor for the entire width of the opening.
    2. After the door is in place, it is possible to attach the platbands and necessary fittings.

    joints-sheets-with-lining-doors

    Door paneling with gypsum plasterboard

    Today, many home masters are wondering how to seal the door with plasterboard. This is necessary in cases where you need to get rid of the doorway or remove it altogether. In order to do everything right, you must first dismantle the old door.

    1. Remove the door frame with the canvas.
    2. The resulting potholes in the opening, clean, and level with putty.
    3. On the floor, in the opening in the wall, install the guide profile from the metal. Strengthen it so that the sheet of drywall does not subsequently protrude beyond the plane of the wall, it must be level with it.
    4. Then, by the same principle, attach the upper profile.
    5. Two metal racks set on two edges of the doorway, and one in the middle.
    6. Attach the cut GCR to all fixed profiles with screws.
    7. On the other side of the wall, do the same, that is, the doorway needs to be sewn on both sides.
    8. At the very end of the joints of the finished structure can be gently patted and wallpapered with wallpaper. More information on how to make a door from gypsum board can be viewed on the training video.

    Partition of plasterboard with their own hands

    Before starting work on the production of gypsum plasterboard, it is necessary to take into account several recommendations from specialists:

    • determine the exact location of the structure, calculate and purchase all necessary materials;
    • according to your drawing make markings on the floor, on walls and ceiling. Only after that you can start work.

    It is not easy to assemble a partition for a room, this requires certain skills and knowledge. Use the building level and a centimeter to make the wall smooth. After the work on the plating of the metal profile with plasterboard is finished, proceed to the finish. You can cover the partition with wallpaper, pre-processing the seams with mounting tape or putty.

    The same technology is used to reduce the doorway. To this and other installation works should be treated with great responsibility, because minor errors can lead to material damage and money expenses.

    810220058

    instagram viewer