How to care for interior and entrance doors

click fraud protection

Interior doors - an indispensable attribute of the furniture interior of the home, which is present in absolutely any house. They perform a number of important functions and need careful use. Observing the main rules of care for the doors , , you can extend the life of their doors and keep the original appearance of the new item.

Contents

Doors with varnished coating

Maintenance of interior doors , with a polyester coating need regular inspection to detect damage, scratches and other defects. Since such products are often represented in the economy segment, their quality is not always at the highest level and should be carefully looked after from the doors. However, this process is quite simple, and you can quickly restore the original look with the help of varnish and impregnation.

01

Consider the basic rules of door care:

  1. Since this kind of interior is made of material that passes a special drying, in the period between buying and installing the door, it must be stored indoors. This will allow acclimatization.
  1. Avoid excessive dryness and heat in the room to prevent cracking of the fabric.
  1. Preferably - do not remove the polyethylene until installation, and also keep the product away from heating systems. This will avoid the unpleasant consequences of sudden changes in temperature and humidity - cracking, deformation, swelling, etc. distortion.
  1. It is necessary to install doors with varnish in the last turn, after completion of all repair work. Because the impact of moisture for them is disastrous.
  1. If the door leaf is covered with tinted lacquer, direct sunlight should not be exposed to it permanently - this can cause uneven fading of the surface.
  1. To maintain an aesthetic appearance, every 6 months, deep cleaning is necessary. To do this, it is necessary to perform such manipulations:
  • wipe the surface of the cloth with damp cloth;
  • dry the entire door with a towel;
  • , apply 10% alcohol solution or a specialized product to the product.
  1. With periodicity of 1 time in 2 months it is necessary to process doors with polish, which contains paraffin or natural wax. Such measures will allow creating a thin protective layer, protecting the product from moisture.

When purchasing wax, emulsifier, antistatic silicone or other , care products, pay attention to the type of surface for which they are intended. In the composition of quality solutions should not contain coarse chemical additives.

Among the most famous brands that produce furniture care products are:

  • Emsal;
  • Chirton;
  • Pronto;
  • Oricont Luxus;
  • Tatrachema;
  • Mebelux;Fantastic furniture.

1

Solid wood doors

Caring for wooden doors is a particularly delicate process, since such products are manufactured on technological equipment, have a high cost and reflect the status of the owner of the home. The most common materials for production are: beech, alder, oak, pine, ash. Products from solid wood have a long service life, but they must be carefully looked after.

02

The main requirements for maintenance and care of wooden doors:

  1. The product can be processed by conventional means designed for furniture. If the canvas is made of pine - it is permissible to use a mild soap solution, since the material is poorly susceptible to moisture. However, it is necessary to protect the canvas from mechanical impact and damage.

Important! Do not use acetone-containing solutions, as well as cleaning powders.

  1. When carrying out repair work, it is recommended to remove doors from hinges or cover them with a polyethylene film. In the protective coating there should be no gaps or holes.
  1. When operating the product, it is necessary to avoid increasing the humidity and temperature inside the room, since these are the main enemies of natural wood.
  1. It is necessary to wipe the door leaf with a special solution containing 15% alcohol and 85% water at least every 3 months. After wet wiping, it is necessary to wipe the product dry.
  1. Do not use such tools to care for doors , which contain abrasive powders. This is fraught with deterioration of the appearance of the wood canvas and its functional characteristics.
  1. If scratches appear on the door during use, they can be quickly removed. To do this, you need to do the following:
  • wipe the damaged area with a damp cloth;
  • by soft pressing, to process the scratch site with sandpaper with fine fraction;
  • apply a thin layer of polishing wax on the peeled area;
  • remove excess by dry matter.

It is also recommended to inspect the door hardware at least once every 2 years. For this you will need to perform such manipulations:

  • remove the door leaf;
  • adjust and clean loops, guides and fasteners;
  • grease all fragments with a semi-liquid lubricant or oil;
  • hang the door on the hinges and test the serviceability of the hardware.

hand-woven

Veneered doors

Interior doors of veneered type are quite common designs that are famous for their reliable performance, long service life and good workmanship. Care for veneered doors will not only prolong their working capacity, but also simplify and make their use comfortable.

4

It is quite easy to look after veneered interior doors. For this purpose it is necessary to adhere to several recommendations:

  1. It is very important to observe the timeliness of inspection of the cloth and door hardware. Products from this category are difficult to restore, so it is better not to allow their damage.
  2. The most attention deserves the varnish with which the surface of the veneer is covered. It helps protect wood from deformation, damage and weathering, and also gives the product an aesthetic appearance. Therefore, you can not tolerate abrasion of the lacquered surface on the door.
  3. It is necessary to clean the cloth from dirt and dust at least once a month, using special tools for treating the furniture surface. This polish gently eliminates all particles and covers the canvas with a protective film that prevents penetration of moisture. In addition, the protective layer has dust repellent properties.
  4. It is desirable to use care products with the content of natural beeswax. This will protect the surface of the door from the negative effects of sunlight and give the canvas a noble gloss.
  5. The inspection and cleaning of the hardware should be carried out at least once a year. Then it needs to be treated with grease.
  6. If the door spontaneously changes its position from closed to open, it is necessary to remove it and make a correction of the hardware. If you do not perform it in time, you may get unpleasant consequences in the form of sagging the cloth and its damage.
  7. Do not place heaters near the door, do not expose your product to high temperatures or moisture.

Often, when cleaning floors, the lower edge of the veneer door also falls under the water, which entails negative consequences. In order to avoid damage to the product, it is necessary to treat this part of the door with a double layer of polishing and wax, specially designed for the furniture surface. This will save the canvas in a suitable condition for long years of use.

You can find out about the features and differences between types of interior doors below:

Glass doors

Sliding interior designs with glass fragments or solid glass doors are fragile and elegant interior items. They have a pronounced aesthetic appeal, being an object of attention in any interior. For this reason, care must be taken to ensure their condition and to use them carefully.

Maintaining the glass door in its proper condition is easy. To do this, you need to follow these recommendations:

  1. Wipe the glass tightly as it gets dirty, but at least once every 2 weeks. To do this, use only cotton cloth.
  2. As a detergent, solutions having a neutral or slightly alkaline medium must be used. It is acceptable to use a weak shampoo solution.
  3. It is not recommended to use detergents with abrasive powders.
  4. You can use a simple recipe by rubbing the glass surface with a mild soap solution with the addition of vinegar or ammonia siphon.
  5. Do not use to clean rough fabrics or brushes.

5

Result of

Maintenance of interior doors, regardless of their type and surface features - an important component of the content of products. Simple manipulation and regular cleaning will avoid serious problems and damage to the canvas, as well as expensive repairs or restoration.

Important! A mandatory requirement is to prohibit the use of the following materials when caring for doors with any type of surface:

  1. Scrapers or sponges with plastic or coarse metal surfaces.
  2. Treat the surface of the blade with means that are not designed specifically for cleaning the furniture surface.
  3. Use detergents that contain oil, abrasives, alkali or acids.

Manual for interior door leaf care can be seen on the video:

instagram viewer