How to work without additional costs?
Before you glue the tile, the ceiling must be prepared properly. For this simple operation, you will need:
- Remove all old ceiling coverings( paint, plaster or panels);
- Verify the relative evenness of the rough ceiling;
- Putty all crevices and irregularities;
- Primer primed deep penetration primer.
All this is necessary to ensure that the tile is laid high and held on the draft ceiling. But how correctly to glue a ceiling tile? When the rough surface of the ceiling structure is prepared, it is necessary to proceed with the selection of the desired adhesive composition and its preparation. Important! When preparing the rough surface of the structure, use protective goggles to protect your eyes from building dust and fragments of concrete or plaster.
The sequence of work related to the
ceiling tile In order to understand how to glue the tile on the ceiling, it is not necessary to watch the videos. It is enough to remember the order of work and some features that are responsible for the final quality of repair activities. It begins with the definition of the central part of the rough ceiling, where the gluing process begins. To do this, pull two nylon cord on the diagonals of the ceiling. Stretching the cord allows you to find the point that will be the center of the most rough ceiling.
By the way, hence the question arose about how to glue the tile on the ceiling diagonally. The fact is that many people think that this way the material does not fit. This is a mistake, and the process technology is practically no different from the standard procedure.
Important! Use only kapron cord, because a simple thread will sag, which will not allow you to achieve accurate markup results.
After the center is found, two cords are pulled through the found point. This will divide the entire structure into four identical squares. It is these lines that will become the basis for gluing the tile material.
Selecting and using a special adhesive
Many beginning repair masters are asking about the glue to glue the ceiling tiles. The answer to this question is quite simple, because for such purposes only a special composition is used, which is intended for this type of work. In some versions of the rough ceiling, gypsum plaster can be used as such a composition, which is prepared in the same proportions as for plastering walls. But it is best to use only special solutions that are provided by the manufacturer of the tiles.
Important! Properly selected and prepared composition is the main component of this type of work, which excludes negligence and carelessness in this matter.
Composition is prepared according to instructions, which can be found on the package. If you deviate from the set standards, the guarantee of fixing the material is completely canceled. Apply the composition to the surface with a notched trowel, which eliminates the possibility of applying more solution.
For more detailed familiarization with the repair process, you can use the viewing of special materials, which include a video called "how to glue ceiling tiles, video."The material itself is mounted on drawn lines, which became visible after pulling a capron cord. Adhering to clearly delineated boundaries, you can achieve the maximum quality of repair work.
