Types of piers, their characteristics
The choice is really great and we will consider the most common options:
- Brick partitions. This option is the most durable. However, there are also shortcomings. The wall made of bricks is very heavy, which gives a big load on the overlap. Therefore, not everywhere there is an opportunity to choose this option. The laying of such a method is really a complicated and long process. Proceeding from this, this type is rare.
- Partitions are wooden. Very common, environmentally friendly and light. Of the shortcomings - a weak noise insulation, fire hazardous material and the need for climate control. The temperature should always be one, otherwise there is a risk that the tree simply "leads".
- Partitions from plasterboard. In general, it should be noted that this material is also very popular in other areas. A big minus, of course, is fragility. In addition, do not use this material in rooms where there is high humidity.
- Partition of foam blocks. One of the best options, among the shortcomings except that high weight and artificial material.
- Splitters - the best choice. Made of environmentally friendly material. The installation of the plate is very simple, the heat and noise insulation has one of the best indicators.
Assembling a partition of
slabs Before installing the partition walls, the preparatory work needs to be done. The most important thing is that the temperature in the room is not below +5.You can perform the installation in two ways - a hard or elastic junction. The second option is used by those who want to do everything faster. In this case, the blocks are attached to the structures without additional gaskets, which lowers the level of sound insulation. We will consider the second option. 
First of all the list of tools that will be required for this task.
- Rubber kiylum.
- Two levels. Big and small.
- Spatulas.
- Classical hacksaw.
- Rubber stripping machine.
- Mixer classic.
We pass directly to the installation of the parasol.
- Clean the floor and walls, they must be flat.
- We use special staples for elastic joining. The bracket is mounted in the groove of the plate.
- The jumper can not be used if the width of the door opening is not more than 80 cm and only one row of slabs is planned.
- In case of an opening width of more than 80 cm, it is necessary to install a jumper beam.
It is necessary to seal all contact areas of the partition with the wall-bearing gypsum solution. 
It is the pierreplast plates as the piercing material that have the best performance in terms of ease of installation, quality, insulating characteristics and long-term, which is why most installers prefer this type of zoning and redevelopment. For people who are used to working with their own hands, this method is also quite accessible, thanks to the relative simplicity of the assembly. The cost of the material does not exceed the barrier of accessibility, so each partition can afford such a partition.
