Mold in the bathroom - the causes of the appearance of
For the appearance and reproduction of mold( the growth occurs in a geometric progression!), A number of conditions are necessary, the onset of which must coincide in time. That is, in your bathroom at the same time should take place:
- mold spores fungi;
- ineffective ventilation system;
- high humidity.
The first point is often puzzling. Well, where could the arguments come from? In fact, you yourself could bring them to the house on your clothes, as they are kept in considerable quantities in the street air. Getting into the bathroom, in the presence of a nutrient medium and favorable conditions, the mold begins to grow actively. The nutrient medium for it is dead organic matter, which is in wood, concrete, paper and even in paints.
Please note! If a month ago you updated the bathroom and already saw dark spots, it is possible that the disputes were waiting for the right moment in the purchased building materials.
As for high humidity, there are no questions, this is the specificity of the premises. After bathing, the figure may be 90%, but with good ventilation, this figure is reduced. A proper movement of the air simply does not allow the spores to cling to the surface. Otherwise, the humidity is constantly maintained at a level of 50-70%, which is what is needed for the growth of mold. Is it possible to fight this unexpected visitor in the bathroom?
How to clean and remove mold for good
Questions about how and how to clean mold are secondary compared to why it appeared in the bathroom. Precisely this finding will become the key to effective struggle. It's one thing if the spores live on the surface of a ceramic tile or silicone sealant, and another - if it grows from plaster, which you have aligned the walls of the room. Determine the root cause of the appearance of dark spots yourself is quite difficult, more often for these purposes, specialists are involved.
This is important! Without figuring out where the feet grow from mold, it's impossible to completely eliminate it. All your efforts will lead only to a temporary result.
In any case, in your power to affect the microclimate of the room, which plays an important role in the reproduction of mold fungi.
Reducing humidity and improving the quality of ventilation
Without the involvement of specialists, you can:
- Evaluate the condition of water pipes. On modern plastic products, there is almost no condensation. If you still have old metal pipes, hurry to replace them.
- Investigate all the same pipes and plumbing for leaks. They significantly increase the level of humidity in the room.
- Install the heated towel rail if it is not already installed.
- Thoroughly ventilate the room. Open the door more often, install the fan in the air hole. It is with an open door that it will give the most effective result.
Mold Removal Tools
If you are ready to periodically clean yourself, you should know how to remove mold using improvised tools.
Chlorine
One of the most suitable is chlorine, which for sure everyone has in the bathroom. Undiluted water, it cleans the surface of the fungal colonies well and even prevents them from appearing for a while( of course, with good ventilation and low humidity).
Mortar soap
Another helper will be a strong solution of laundry soap, but the result will be short-lived. In many sources it is recommended to use copper sulfate, but it is necessary to work with it carefully, so as not to harm yourself. Get poisoning in the process of its application is fairly easy.
This is important! With whatever means you do not work, take care of the protection of the respiratory tract! Stock up with rubber gloves and a respirator. For the body, not only vitriol and bleach are harmful, but also mold spores.
Cardinal measures to combat mold
Have you thought about how to remove mold forever? Then be ready for the most drastic measures, especially if the root cause of its appearance was poor-quality building material or composition. In this case, you have to sacrifice the finishing of the room and make repairs anew, but completely or partially, depends on the degree of defeat. If the mold is only on the surface of silicone sealant or trowels, then it makes sense to remove the old material and use a new one. The latter should have in the composition of special substances that prevent the appearance of fungus.
In the case when specialists have revealed a deeper spread of mold, it will be necessary to remove the covering of the walls to the site of damage, to treat the base. In the future it is recommended to use only those materials that contain special impregnation. This is not cheap, but it will save you from the fungus with a guarantee of almost 100%, of course, while maintaining the appropriate microclimate in the room.
The fight against mold can be long and difficult, demanding considerable financial investments, but the result will please you for many years.
