Ideas for the garden with their own hands with photo and description

Flower bed made of natural stone

An original flower garden ornamentation will be a flowerbed made by own hands. Beautifully looking flower garden with sides, laid out from natural stones .For these purposes, you can take cobbles of different sizes, shapes and colors. It is enough to lay them on the perimeter of the future flowerbed in several layers. Of these natural materials, you can also create a real masterpiece. For example, to build a composition of stones of different shapes and sizes, decorated with flowers. Thus you can build a basket, a huge bowl or a pot with a wide neck.

Tree flower garden

Another interesting idea for the garden is the flowerbeds decorated with wooden elements .This option of decorative design is suitable in the case when the flower garden has long been broken, and there is no possibility to change its location. To update its external appearance it is possible by means of the constructed fence from wooden laths or sticks. As an option, you can weave a basket of any shape from elastic thin stems or make of a wooden log cabin a compact hut, from which flowers will grow.

A simple flowerbed from the old

Another material from which beautiful handcrafts are made for the garden are the old car tires .Of these, you can also make a large flowerpot for plants. For this purpose, one side must be cut in such a way that denticles are produced. For such a pot you can dig a small hole or lay it on a flat surface. Next, fill the interior with earth and plant flowers. To make the decorate, the tire can be painted from the outside in any color. Before painting, the tire must be thoroughly cleaned and degreased. For these purposes, gasoline is suitable.

Ideas for the garden with their own hands. Photo

Flower-palette with their own hands

Decorate the territory of the garden and garden with their own hands can not only with the help of beautiful flower beds or structures, but also with original accents. For example, you can build an unusual flower bed-palette. To make such an ornament is possible to any master.

The idea of ​​a flowerbed for the garden. Photo

In order to create a flower bed, you need 8 flowerpots. For these flowerpots it is necessary to prepare 8 pots, in which vases with flowers will be inserted. For landscaping, you can use any flowers. In our case, multi-colored petunia will be planted. We will also need a shovel and rake, which will serve as a "brush".As a basis for the palette, it is necessary to prepare a sheet of plywood or expanded polystyrene .In our case we use expanded polystyrene.

The order of manufacturing the flower bed-palette

On a sheet of expanded polystyrene with a marker or pencil, we apply the borders of the palette and mark the places under the holes for the pots. We got 9 pieces. The diameter of the hole depends on the diameter of the pot itself.

Using a hand cutter, cut out the part on the previously drawn contour.

The middle of the palette is strengthened from the front and the underside with round pads made of plywood. You can fix them with glue or screws. First, attach the gasket from the wrong side, on which we attach the leg-stand. Then fixes the front gasket.

Paint the surface of the workpiece with "wood" paint in 2 layers. For these purposes, we took two shades of paint - dark and light.

After the workpiece has dried, it is covered with a layer of varnish on top.

Next, in the holes that are formed, you need to insert flower pots with flowers, and in the remaining free ones, insert garden tools that will act as "brushes".

Garden figurines with their own hands

It's not difficult to create unique handicrafts for a garden of available materials, especially if there are special skills. You can make such statues with the whole family. Thus, you can not only decorate the homestead territory, but also leave in the child's memory pleasant memories of his childhood. Hand-made garden figures will be an excellent gift for close people.

Step-by-step instruction for making chicken

In order to make a cheerful chicken you need to prepare the following materials:

• pumpkin in the form of "pear" or gypsum;
• colored paints;
• polymer clay. Instead, you can use a salty dough or gypsum;
• hot glue;
• matt lacquer.

Carefully wash and dry the pumpkin with the first coat of paint. After the layer is dried up, two or three more layers are applied. Thus, one can obtain a one-color coating.

Instead of a pumpkin, you can use gypsum .For this purpose, take a package, pour in it a plaster and with the help of ropes attach the necessary shape. Ropes must be securely fixed until the gypsum has dried.

After drying of the last layer of paint, it is necessary to apply contours of the future ornament with a simple pencil.

Next we paint with acrylic paints previously painted ornament.

In order to form the head of the chicken, polymer clay is used. Also for these purposes, you can use gypsum or salted dough. We sculpt the scallop, beak and beard. The obtained details are fixed with hot glue to the head of the chicken.

Draws eyes with black and white acrylic paint. To do this, you must first put a black dot, and then add a point of white paint to it.

To fix the garden figure of the chicken must be varnished. For these purposes it is better to choose a poppy varnish.

Manufacturing of figurines of hedgehogs

You can use original figurines of hedgehogs made from improvised materials for decorating the homestead. Effectively look hedgehogs, made of plastic bottles, wrapped hemp ropes. In order to keep the ropes they must be fixed with glue or staples. Eyes and a nose can be painted with black acrylic paint. Also, the spout can be made from a plug from a bottle or polymer clay. As a "thorns" I plant grass.

The hedgehog can be made from plaster. The manufacturing process is the same as for the chicken. For manufacturing, you can also use cones, mountain ash, plastic bottles, cork, tree branches and various flowers.

Peacock from plastic bottles with own hands

Peacock made of plastic bottles looks equally impressive on the backyard.

For the manufacture of peacock, the following materials will be needed:

• large number of plastic multi-colored bottles;
• scissors;
• multi-colored electrical tape;
• wide adhesive tape;
• synthetic foam;
• plastic;
• glue gun;
• mesh abrasive;
• plastic pipe.

Step-by-step instruction for the manufacture of peacock

Cut out plastic bottles of parts of different sizes, which will later be feathers. The resulting parts must be cut at the edges to make fringe. In this way, you will get an imitation of feathers.

Torso is cut from synthetic foam .Joints are sealed with a transparent wide adhesive tape.

To the body we attach two plastic pipes , which will be kicking.

Ideas for the garden with their own hands. Photo

Cut out a triangular piece from a bottle of red color and turn it into the shape of a cone. This will be the peacock's beak. Fix it on the head.

The trunk of the figure is pasted with pre-cut feathers from multi-colored plastic bottles. For fixing we use adhesive gun with silicone rod. On the breast should be short "feathers", and on the back - longer.

For the tuft, we need the thin strips cut from the plastic, which are attached to the top of the head.

For the plumage of the head, you need the oval form.

Eyes draw with acrylic paint .

Cut out the "feathers" for the tail. The length of one "feather" should be approximately 20-30 cm on average. To do this, a long oval is cut out, fused in the middle with a fringe upward.

The tail frame will be the abrasive mesh , on which the "feathers" will be fastened. To strengthen them is recommended in scaly order from the bottom up.

To decorate the tail of the multi-colored , the insulating tape is cut out into different sized ovals, which are glued together, simulating the color of the peacock. Glue such an ornament on the edge of the pen.

Paws are cut from the top of the bottle and "put on" their pipes, which are the "legs" of the craft.

Ideas for the garden. Peacock with their own hands: video

Beautiful paths in the garden with their own hands

Garden paths play an important role in landscape design. They perform not only a practical role, but also a decorative one. Make such beautiful paths in the garden with their own hands is not difficult. Consider several design options:

The garden path can be sketched by with or with mixer. For the summer, annuals are planted in a dense planting. For mixborders, plants of different height and configuration are suitable. Perennials are considered more suitable for these purposes.

Regardless of the type of garden path chosen, it must be protected from of wastewater .For these purposes it is recommended to build them above the ground level or near a flower garden. Tracks with a solid base are laid on a pillow of gravel or sand.

The flowers look great, which are located not only along the edges of the path, but also on it. To realize this idea it is necessary to make the path not solid, but with stepping stones or stones drowned in the ground. When designing the path of such a plan, it is necessary to consider the sequence of flowering plants around it. It is advisable to plant such plants that will combine not only the color scale, but also the order of flowering throughout the warm period.

The garden paths should also perform zoning of the site on the functional areas of the .When designing the pathways, it is necessary to correctly calculate their width and to think over the stylistic design with the help of flowers.

The garden paths also look good among the plants. The main thing is that the plants have a beautiful configuration or have an unusual shape of the leaves. No less impressive are the tracks, decorated with plants of the same species, but which differ in color.

Garden swings from tires in the garden

For the manufacture of garden swings, you can use not only wood or metal, but also improvised materials, for example, conventional car tires. Such products can be fixed on a tree branch or on a specially assembled frame for this purpose. You can also make hanging swings in the form of a horse or chair. The advantage of this design is simplicity of manufacture and economy. In addition, you can hang such swings anywhere. Alternatively, the swing from the tires can be hung on two rows of growing trees or two near a set pillar.

For the manufacture of garden swings, the following materials will be needed:

• metal chain or strong rope;
• old car tire;
• fasteners;
• drill;
• two wooden or metal posts;
• metal crossbeam;
• jig saw, Bulgarian or sharp knife.

Step-by-step instruction on manufacturing a swing from an automobile tire.

Install two posts .For these purposes, suitable as metal, and made of wood. If you plan to hang a swing on a branch, you must choose a strong branch.

Attach a metal crossbar to the top of the posts.

Attach the fastening bolts to the metal crossbeam with the rings through which a strong rope or chain must be pulled.

At the bottom, the rope or chain must be attached to the car tire.

For the swing you need a whole tire, without any significant defects.

Ideas for the garden with their own hands. Photo

Before fixing the fasteners, the is thoroughly washed on the outside and inside with a cleaning agent.

After the tire has dried, it can be painted in any color and leave it to dry.

For fastening the rope or chain, you can take the U-bolts. It will be enough to have three pieces of medium diameter.

Use a drill to drill 6 holes for fixation( 2 at the same distance from each other).

For fixing, it is necessary to place the bolts in the drilled holes and fix them from the inside with the help of washers.

Attach a rope or chain to each bolt on the tire.

Attach the swing to the metal bar or to the tree branch using one or two fasteners.

Rope swings in the garden

The garden swing can also be done with boards and strong ropes. The thickness of the board should be on average 15-20 mm. Such swings can be hung on both a tree and a specially made frame for this purpose. For the manufacture of such a swing the following materials and tools will be needed:

• board;
• strong rope;Jigsaw, saw or hacksaw;
• paint or varnish.

Step-by-step instruction for the manufacture of rope swings

We make a seat for a swing. To do this, you need to cut out a rectangle from the board. You can also knock down a seat from several boards.

Drill four holes with a diameter of about 22 mm on four sides at a distance of 30 cm from the edge.

The board should be coated with with or paint .

Fasten the rope on a branch or on a special construction.

Draw a strong rope through the drilled holes on the board.

In order to fix the board it is necessary to tie all the ends of the rope to the knot under it.