Installation of a shower cabin with their own hands - the order of work, video instruction

click fraud protection

It should immediately be stipulated that it is better not to purchase products made in China. Not only is the quality "not very", so also the "quality" of the assembly instruction itself is also "not quite".And it's still gently said. I'll have to use all my wit and stretch imagination to comprehend this translation into Russian. But until the end, you still can not understand. Therefore, I will explain in detail how the installation of any shower cubicle is made, which is not too difficult and it is quite possible to do it yourself.

Completion and assembly of the

cabin The technology of this work may differ slightly for booths of different designs and different manufacturers, in fact, as in the case of an acrylic bath, as we have already said. After all, there are cabins that are simpler, and there are a number of additional functions. But in general, the order of assembly for all is almost the same. Before you get started, you need to figure out what the main parts of such a cabin consists of.

So, this:

  • pallet with a special leveling frame;
  • rear panel and side panels( if any);
  • cover( ceiling);
  • door( or door).

device It should be understood that all cabs have different equipment. There are modifications in which there are no walls. These cabs are installed in the corner part of the room - it is the walls of the room and will play the role of "sidewalls".

With this design, the pallet is attached to the wall, and it is better to do this with anchor bolts. Those who have already faced the assembly of shower cabins, recommend( if there is such an opportunity) to conduct a "training" assembly first. This idea is quite sensible - during such an assembly it will be possible to understand the whole design, in the order of installation, and at the same time and check whether all the necessary components are available.




It often happens that something is missing, but something does not fit, and something has to either buy or change this product in the store for another. At the same time it will be possible and "live" to see what dimensions the cabin has. This will help to more accurately determine both the installation location and the position( orientation) of the cabin itself in the room.

How to install

All work begins with the installation of the pallet. The main thing is to properly fix its legs. After that the connection of the "drain" is made. The discharge pipe to the sewage system must be laid so that, on the one hand, it is not possible to see as much as possible, but on the other hand, to have convenient access for maintenance( cleaning) of the pipe.

Therefore, it is necessary to provide a special opening, as it is done in sewage pipes. But this, of course, if you do not use corrugation. Further, with the help of the building level, the pan must be sealed off. Its legs have a limit adjustment, so twisting - twisting them, you need to achieve absolute alignment of the plane of the pallet relative to the horizon.

It should be understood that if the pallet has at least a small, even inconspicuous, skew, the already assembled cabin will look correspondingly. The door will not be tightly closed, and the presence of slots is guaranteed.

First of all, after finishing the work with the pallet, experts recommend installing the rear wall. Fasteners can be different, but the rule for all one is a good sealing of the joint of the back wall and pallet. If this is not done, then during the reception of the shower around the cabin, on the floor of the room, there will always be water. Pleasant, of course, there is nothing in this. By the way, the same applies to the fastening of the side walls. Everything is carefully sealed up. In stores a large selection of different sealants, including color.

installation of a pallet installation of the

tray. It is best to install the water supply system after fixing the rear wall. More convenient to use flexible hoses, and you need to buy a little longer than necessary. Stock will not hurt. When installing water supply elements, you should also pay attention to the quality and tightness of all connections.

Many cabins have a hydromasser, a steam generator. For such cabs, a power line is required. It is carried out necessarily using a separate protection device. And do not forget about grounding.

If for private houses this is not a difficult problem, then for residents of high-rise buildings - a painful issue. After all, in the apartments until recently, the project was "supply" only the phase and zero, but there is no land. Therefore, this issue must necessarily be resolved. It must be remembered that the shower( many of them) are electricity and water in one place! So it's clearly not worth neglecting security issues.

At the last stage of the assembly, a roof is installed. Again, a sealant is used. And finally, the door and the attached fittings. After the completion of the assembly, it is necessary to check the operation of the cab in all modes, with all the functions.

dush_cabin

Required water pressure

Before buying a cabin, you need to clarify the question, but will the water pressure that is present in the room be sufficient? Especially if this is one of the last floors of a high-rise building, where, as we know, the water pressure is not always at its height - the pun went out. Perhaps you have to buy something else( pump, capacity).

By the way, it is on the pressure of water and you need to navigate by choosing one or another model for purchasing. It can happen that in a particular apartment the cabin will not be able to work in all possible modes, with all the functions provided.

instagram viewer