Toilets with oblique discharge: types, with anti-slip function, microlift

There are more options for toilet seats in modern sanitary ware shops. And in all this diversity you need to understand in order to choose the right plumbing for your home. Today we will talk about the toilet with an oblique release.

The oblique discharge, that is, the element through which the drain from the bowl is diverted into the sewer pipe, can be located at an angle of 30 to 45 degrees relative to the floor.

Similar products are often found in the domestic production of bathrooms, they are actively produced by our manufacturers. It is caused by the fact that a lot of typical multi-storey houses are equipped with just such a withdrawal system, that is, it is ideally suitable for this type of toilet bowl of the oblique type of release.

It is noted that the main advantages of such sanitary ware are universality and reliability. But there are other pluses:

• They rarely clog, do not need constant cleaning of the system;
• Pollution easily goes into the sewer system due to weak resistance;
• At installation apply at once two wheels which angle of rotation makes 45 degrees. This is noticeably more effective than one knee by 90 degrees;
• Ease of installation is also an important advantage. There is no need for a clear point to connect. This greatly simplifies the problem if the outlet socket is not accurate;
• Widespread prevalence. Finding a similar product is not at all a problem. Because if the old toilet is broken, you will not have to buy a new one with a similar release. Therefore, there is no need to change the challenge.

But there are certain drawbacks in the slanting issues:

• If the old toilet bowl has become unusable, and in its place you took a product with a different type of release, it may be necessary to change the sewerage drain to connect the product;
• The quality of the corrugation plays an important role. If it turns out to be bad, cracks will appear over time and this will cause leaks.

In the rest of the negative aspects of the products do not.

In the apartment house, the main line is already mounted at the construction stage, therefore under it the oblique toilet bowl will not always work. The only solution is reconstruction. But for many it's easier to just pick up a plumbing with a suitable release, rather than doing such a difficult job.

Outlets are mounted at an angle of 45 or 30 degrees. Due to this, it is not difficult to choose the optimum toilet bowl. The versatility of oblique toilets makes them preferable to a number of analogues, as they are easier to connect to typical sewers.

Features of products of this kind is the presence of a single-piece or separate design.

1. Separate toilet bowls provide for a separate location of the tank and bowl .This makes it possible to vary the installation, perform various interior tasks, make the space of the room visually greater. After all, the tank can be mounted in a wall, or fix it at a convenient height. Also, separate models give a more effective flush, as water moves down at a high speed. In this regard, they are superior to monoblocks.

1. Monoblock. His device is clear from the name. The bowl and toilet bowl form a single whole. Mount it is easier, plus the look of the product is modern. Plus, care for exercising is easier for him. As for the shortcomings, they include a higher cost, as well as the need for more space. Visually, they do not look as compact as separate.

The microlift system is provided on the lid of the toilet bowl. With its help you will get a number of advantages:

• You will not be bothered by the sound from the falling cover. Going out at night to the toilet, sometimes it's impossible to follow her, and she falls with a crash on the bowl. From such a noise, the family will probably wake up. And if you have a small child, then you will not go to sleep;
• Microlift protects the bowl and the entire toilet from damage. They can form as a result of a sharp drop in the lid;
• You can avoid cracks, chips, noticeably prolong the life of the product.

Therefore, the choice in favor of the microlift fully and completely justifies itself. This is a modern solution, which is useful for a large family with children.

Even modern plumbing fixtures can not keep you from splashing. This is not the most pleasant phenomenon, so it is desirable to fight it.

Unfortunately, the deception of you may lie in the very shop of plumbing. A number of manufacturers are going to tricky marketing steps, emphasizing a lot of attention to the term anti-splash. That is, you can easily buy a toilet, which in fact this system will not be equipped.

Therefore, we advise you to get acquainted with the essence. It consists in the nuances of the geometry of the drain hole. It shifts in some direction. This makes the water column minimal. As a result, splashes are excluded.

Does it have any connection between the outlet and the spray in the toilet? Absolutely not. In no way affects one another. Everything depends entirely on the shape of the bowl.

There are three types of forms:

• With shelves;
• With slopes;
• Mortar-like.

In the case of the last type, the drain hole is in the center. If the shape is inclined, it means that it is drained closer to one side. And regiments are used in our time very rarely, because they have serious shortcomings. Because of them, they can not impose competition on other species.

Choose a shape, focusing on your own needs and desires. They are individual, therefore we can not give concrete recommendations on this matter.

Toilet bowls having an oblique type of release may differ from each other according to several features.

1. Material. The most popular are porcelain and earthenware. They are widespread, but they are characterized by shortcomings - excessive moisture absorption, because of which the color, texture changes, cracks appear. Analogues - these are plastic, acrylic models, you can not clean them with abrasive brushes. Expensive models are made of stone, metal. Beautiful, but completely impractical.

2. Form. There are several types:

• Visor. Create a minimum of spray when draining water;
• Belleville. Do not require a lot of water for flushing due to the location of the drain pipe;
• The funnel-shaped. They need care, because they form a lot of splashes when draining.

3. Water supply. Is divided into the side and bottom. The latter is preferable because it creates less noise when filling the tank.

4. Flushing. There are three options - permanent, controlled or dosed. Dosed flushing allows you to choose how much water will go to the flush. Adjustable to stop washing manually. Save the liquid.

5. Water flow. Can be circular or solid. Circular flow more efficiently bathes the bowl, plus does not lead to the formation of splashes. Choose the best one.

There are three ways to install an oblique toilet. About each of them we will tell in more detail.

1. Direct connection to the socket. The method is relevant if all connections are perfectly matched, that is, you do not have to shift the plumbing to the side. It is important to correctly calculate the location of the socket. Apply a special cuff, depending on what the sewer pipe is made of - plastic or cast iron. Lubricate the release with soap, insert it into the socket, on which the cuff is pre-installed. Then you just have to fix the product on the floor.

1. With the help of an eccentric. This is the same bell, just a little with the center shifted and the seal gasket installed. It is necessary to rotate the eccentric inside the outlet to move it to the left or to the right by 5 cm. Similarly, it moves up or down. A convenient element that allows you to connect the toilet, even if there are minor mismatches.

1. Corrugated. The eccentric makes it possible to offset only a short distance, and the corrugation opens wider horizons. In some cases, the corrugations unfold the toilets 90 degrees relative to the sewer. But there is a disadvantage of this method - the toilet must be removed from the wall, therefore the area occupied by the product increases indoors. This method is considered to be cardinal, when no other connection option is possible.

As you can see, the oblique release has its advantages, disadvantages and key features. Carefully approach the issue of choice, so that the connection can be made as simply as possible without unnecessary time and money.