How to choose a puncher for your home

Rotary hammer has now become a very popular subject. Previously, the puncher was replaced with a hammer and a jumper.

Those masters who had a lot of experience used powerful electric drills and special drills that had hard tips. There were people who bought Baltic punchers and products of world brands. These include: Bosch, Metabo, Makito and many others, but which firm is better to buy, how to choose the puncher correctly?

At that time, the European remind was not common at all, therefore pilots, sailors who were abroad and saw the life of foreigners, bought there this type of equipment and brought to our country. The technology brought from other countries carried quality and reliability. Masters used this technique, not paying attention to the fact that the required supplies were almost not there. All these innovations were the first steps towards civilization. It should be noted that foreign equipment was used only by workers in large industrial cities and in the Russian capital.

But it should be noted that the time when there was no good quality of technology ended in a short time. The markets began to work, where it was possible to purchase both conventional drills and modern equipment. Also, firms that developed new technologies began to develop more quickly and could deliver tools from abroad to our country without too much effort. After some time, supermarkets, representative offices where it was offered to purchase the blessings of civilization began to work. And absolutely any person could buy these items. Now there is a notice that there is a problem associated with the right choice of technique. Even those people who do not have a lot of money and a lot of free money can buy a puncher for home and work of any value.

Which tool is better - percussion drill or perforator?

Many people are tormented by the question, why are they choosing a puncher rather than a drill? In this article, let's try to answer this question. If you choose an impact drill, you can not help but notice that the drill has a lot of power, while the drill has a small weight, you can say a lot less than a perforator. Also, consumables on the impact drill can be purchased much cheaper than for a perforator and the hole can be made without much effort. So, why choose a puncher, not a drill? To answer this question you do not need to think long. It can be simply noted that the main function of the impact drill is drilling without using the impact mode. The ability to take a blow in the drill can all, this function is an auxiliary. It is this function that expands the capabilities of the impact drill. The perforator can be used to work with brick, concrete, cinder block and other types of building materials. The main function of a perforator is not only drilling, but also impacts. The shock mechanism of the impact drill is an ordinary "ratchet", but the perforator is not so simple. The perforator has both an electropneumatic and an electromechanical principle of impact. If we compare the force of the impact of a drill and a perforator, it can not be overlooked that the perforator in this considerably bypasses the impact drill.

For a tool such as a puncher a safety coupling is made, it begins to work if a certain effort is exerted. For example, if it is necessary to make a hole in a monolithic slab using a drill, and after a while it rests against the reinforcement, then the safety clutch will help to get out of this position without loss. Consequently, if there was not a safety clutch, then later unpleasant situations would occur. The drill, in turn, has a high power and a high pulling force. The perforator lags behind these parameters from the impact drill. These indicators are the main, when you stop focusing on the drill. Thus, from the above, it can be concluded that the drill and punch are the opposite tools, even if you do not pay attention to the same functions. Nevertheless, in order to work at home it is better to use a puncher. For working at home, the perforator will perfectly replace the impact drill. Previously, the puncher had a lot of weight, it was slow in operation, but as we are more and more developing, we began to make perforators that have high speed and different modes of operation. What is better to buy - an impact drill or a puncher? If financial opportunities permit, then buy both that and that. Now you can consider several models, and then decide on the tool that will be most convenient, easy and perform various tasks.

• So before choosing a tool that is more suitable for work, you need to remember that the puncher is professional and household .

Professional and household perforators differ from each other in that each kind has its own degree of load that the tool withstands. Both a household puncher and a professional have many functions. In this case, it can be said that the workers of the production carry out the same actions, therefore acquiring a tool that has a high cost and many functions does not make sense. And all because a large number of tools simply will not be brought to work. Thus, it will not be profitable for any production. But for example, for a small brigade, which is engaged in construction, the multifunctional punch is an excellent choice.

Now let's get to the right choice of the punch.

Now try to choose a puncher, which has a weight of two kilograms. Also consider the perforators of two and three modes and another tool with two speeds and three modes. Manufacturers who produce professional models and do not work with domestic punchers do not overestimate the cost of professional manufactured professional punchers. So, let's go directly to the consideration of various models of the perforator.

Black &Decker KD970KA

This model punch has two modes. This perforator can be got by a rather interesting model, it is produced not one year while this puncher is excellent for home repair. Many people choose this model for work.

Widget from SocialMart

Delivery of a puncher in a plastic case. Delivery may contain completely different sets. Now let's go directly to the properties of this model. Black &The Decker KD970KA has a power of 750 watts and a shock energy of 2.2 J. All this allows the employee who works at home to perform all the necessary actions. Basically, the product warranty period is two years, there is no right angle, which makes the puncher not very attractive. There is no third mode, so the chisel will not be required in the main, the negative factor is that the absence of the regime can greatly shorten the working life.

Rotary hammer Makita HR2450

This model is used by a large number of home masters, and it is so popular precisely because the puncher has reliability and low cost. Makita is a professional tool. Consequently, this model is widespread and fairly well known. The model has 780 watts. The power and 2.7 J. impact energy. The drilling diameter is 24 mm. If you compare the punch, which was described above and this model, then it has the third mode of operation. Makita puncher has high impact energy. With the help of this tool you can without effort put the strobes and fold tiles. Buy a puncher at an attractive price and at a discount.

But still not recommended as an alternative to a jackhammer. If all the time working for a direct blow, then the wear of the impact mechanism will happen in a rather short time. It is impossible not to notice that if this trouble happens, then the service staff will appreciate it as natural, after which it will be necessary to pay for the repair. The warranty is one year and can only be used by those customers who purchased goods with factory defects. If they were seen when using the tool. For work is a great option, for the very same, I will say that it is very good and survived neodin repair.

Bosch hammer drill PBH 3000-2 FRE

Another famous perforator is the Bosch PBH 3000-2 FBE.It can even be said that Bosch products are the leader. Also in 1932 this company produced an electric puncher, which was the first in the world. And at the moment the company produces quality products that are known and popular all over the world.

Recently, such a model of a perforator as Bocsh PBH 3000-2 FBE was released. The production of this perforator is a very interesting development. At manufacturing employees of firm used two high-speed reducer. Also this model has a removable cartridge and it is possible to change the cartridge for standard drills without slowing down, resulting in a powerful drill. From all of the above, we can conclude that when a person purchases a puncher of this firm, he gets a drill. Metabo, Milwaukee also offer similar products. But still we will continue our conversation about the Bocsh PBH 3000-2 FRE.

The perforator has an engine in which the power is 780 W and the impact force is 2.8 J. Special grips are made on the handle, allowing the worker to reduce the impact energy. The manufacturer sets a two-year warranty. This makes the tool even more popular. So, now we will find out what is the attraction of the puncher. The speed of rotation of the perforator ranges from 800 to 1500 revolutions per minute. And many people know this, not only specialists, but also home-based masters. There is a replaceable cartridge, but even he can not carry out such work, which allows working with wood and metal. The productivity of working with these materials is less than the drill. Proceeding from this fact, experts decided to increase the number of revolutions, which led to the installation of a special reducer on the perforator, which helps to increase the number of revolutions up to 3000 thousand per minute. Consequently, the perforator can be used to drill holes for the socket. Also, the perforator can be used also when it is necessary to prepare a solution. Therefore, from the above, we can conclude that this tool can help in many ways home masters.

• So, what is the best puncher to buy? You can answer this question without a doubt. An excellent choice is a perforator, which has more than one speed and three modes.

After-sales service.

There are also some hidden factors that the buyer must know before choosing a punch. The puncher has a sophisticated production technology, which must be handled with care and during maintenance maintenance. It is these actions that will help keep the instrument in good, working condition for a long time. All sellers sellers say that after a certain time it is necessary to bring a puncher to the service and check its condition. But buyers do not like it at all, because half of them think that experts just want to lure more money. But still they are wrong, since the puncher has a special lubricant, which after a while needs to be changed. Also inside the puncher are sets of rubber bands, which also wear out and require replacement. But still those masters who are at least a little familiar with the loads of the puncher do not even think that the prophylaxis of the tool is money luring.

It is also necessary to understand that without the help of a qualified specialist, it is most likely not possible to replace all spare parts of the tool. Therefore, it is better not to take risks. As a result, this can lead to breakage. Also, remember that all wear and tear parts will depend on the loads.

Thus, from the above, it can be concluded that the choice of tools must be approached with special care and thoroughness, and to choose an impact drill or perforator - you decide from their goals. But do not forget about security and choose personal protection when working with the tool.

It happens that the power tool is needed only once, to carry out the work and it is not advisable to buy it and it is easier to hire it, it will be possible to rent out doing this business while you need to know the important points when renting power tools that arise