Installation of a ceiling from plasterboard video, a false ceiling from giprok

click fraud protection

Installation of ceiling from gypsum cardboard photo, installation of suspended / hinged ceiling from gypsum. How to make a ceiling from plasterboard. Beautiful ceiling around

Installation of a hinged, suspended single-level ceiling made of gypsum with a video example.

These ceilings have such advantages as: perfectly flat surface, convenient installation of electrical wiring, a variety of shapes.

Even before the purchase of materials should take into account the following nuances: a sheet of drywall weighs 27 kg - 30 kg, so you will need a telescopic lift or someone's help when installing. Further, the quality of domestic materials is often not at an altitude and it is necessary to use foreign analogues. For the ceiling in the bathroom use waterproof plasterboard, in the kitchen - fireproof.

Consider the installation of a single-level ceiling from gypsum board as a base. First we make markings on the ceiling and walls under the frame and hangers. On all walls, retreating from the ceiling 10 cm - 15 cm, using the level, we mark the places for mounting the profile for the starting frame. Using dowels, at a distance of 50 cm between them, mount the guides from the galvanized profile. We proceed to the marking of the ceiling under the hangers and, therefore, the bearing guides. The markings are parallel at a distance equal to half a sheet of plasterboard( 1250 cm).

We fasten anchors to anchor dowels every half meter. Now take the bearing guides and install them in the starting frame, but not tight( the gap on each side is 2 mm).This is necessary to compensate for possible deformations. Guides should be located under the hangers. Screws LN-16 fasten the rail to the frame. Then fix the guides to the suspensions with the same screws, on each side - two.

Instruments
 Widget from SocialMart

Now you need to install the longitudinal guides. However, if the area of ​​the premises is small, then you can do without them. They are mounted in steps of approximately 50 cm - 60 cm, making sure that the attachment points do not coincide with those of the suspensions. There are two main ways of fixing the longitudinal guides to the transverse ones. One - with the help of single-level connectors "crab", the second - in the bolted sections of the starting segments of the starting profile. The supporting frame for the installation of gypsum board is ready.

Do not forget about the wiring. It must be laid before installing the gyro-plates in a special cable - channels. Also, concealed wiring should not lie inside the metal profile, in order to avoid a short circuit.

We sew the framework with sheets, on this the installation of the ceiling from the plasterboard will be finished. We fix the sheets with screws, starting from the wall. Between the sheets should be a distance of 2 mm;The same distance should be between the wall and the sheets of gypsum board. After laying the last sheet, we cover the joints with special mixtures for sealing joints. It remains only to fill the ceiling. See the detailed video instruction, there everything is laid out on the shelves. For reference: suspended, hinged, multi-level ceiling is all about this type of ceilings.

Installation of plasterboard ceiling video

Art Decor company will demonstrate in detail how they make this type of work. Everything is described in detail and clearly with examples.

https: //

Useful tips and instructions for mounting a hinged, suspended single-level ceiling from gypsum from transmission.

https: //

instagram viewer