Secrets of repair washing machine LG own hands

In order to carry out repairs on your own LG washing machine, you need to familiarize yourself with its design features.

Modern household appliances are easy to use and highly reliable.

At the same time, regular loads lead to wear of various components and assemblies.

Today in the market you can easily select a washing machine, suitable for cost and performance.

Before going to the store, it is advisable to get acquainted with the opinions of people who already use this or that unit.

The next point, which should pay attention, maintainability of the machine.

Functional diagram

The LDJI washing machine is a complex electromechanical device.

Its functional diagram includes the following units and assemblies:

• water filling system;
• heating system;
• laundry washing system;
• water drainage scheme;
• spinning system;
• drying system.

In each new model, developers improve some system or several components.

In order to prevent premature repair, installing and connecting a washing machine, you must strictly follow the rules stated in the operating instructions.

When loading things for washing, follow the recommendations for the volume and texture of the fabrics.

Troubleshooting

The LG washing machine does not have any special operating conditions. It is designed for use in normal household conditions.

The quality of the water and the faucet is suitable for use without prior preparation. The video shows a washing machine installed in the usual bathroom of a standard multi-storey building.

Video:

For the convenience of users, designers have developed a system for indicating the status of the main components of the unit.

The long-term practice shows that with complete serviceability of all components the machine may not work. The main reasons that arise during the washing process are well studied and easily eliminated.

Rattling and knocking

Often when the washing machine is turned on, there is a rattling and knocking in the drum. In addition to this, vibration may appear.

It is possible that small foreign objects just got into the drum - a ballpoint pen or coins. It is necessary to stop the washing machine and inspect the drum.

A similar effect occurs when the laundry is loaded unevenly into the drum. Or it's too much.

Repair in this situation is not required, evenly enough to distribute the laundry in the cavity of the drum. The cause of vibration may be an unstable position of the legs. They need to be adjusted.

If the performed procedures do not help, you will have to solve the problem with your own hands.

Video:

water flows The washing machine is designed so that all water flows from one tank to another are made through hermetically sealed channels.

If the water begins to leak to the floor, then at some point the connection of the hoses is weakened. This happened at the point of connection of the hose with a tap, or a hose with an input into the washing machine.

In this case, you just need to tighten the clutches tightly at the connecting points. Water flows also in the event that the drainage pipes become clogged.

They, in general, should be periodically cleaned and not brought to such a state that leakage becomes a problem. If self-cleaning is not possible, you need to call a plumber.

Water does not drain from the machine

In the event that water does not drain from the washing machine, it is necessary to perform preventive maintenance of the drain system.

The first thing to check when this trouble occurs is the status of the incoming water filter. It is possible that he was clogged.

The second reason, which leads to this effect, is a clogged drainage hose. Sometimes he is in a pinched state. The third reason is the filter of the drainage pump.

Video:

Carrying out the work to eliminate the problem, you need to act consistently.

The video shows the cleaning procedures, which must be done carefully, so as not to break the integrity of the hoses.

Main components and assemblies

Doing repairs or preventive maintenance of the washing machine by yourself, you need to know about those nodes that are faster and more often out of order.

These include the following:

• oil seals and bearings;
• heating elements;
• rubber adapter hoses.

When a fault occurs, follow the operating instructions. Focus on the signals that appear on the indicator.

For convenience, you need to have an accessible table with a decoding of these signals.

Many years of experience show that acting on these recommendations, in most cases it is possible to establish the regular work of the washing machine LG.

If you can not eliminate the knock when turning on the machine, then you need to call the master or perform repairs yourself. The video shows the sequence in which the drum is being repaired.

Knocking or vibration during the washing process occurs because the bearings have exhausted their life.

Therefore, the main task in the repair is to replace the worn bearing with an operable one.

Video:

Along with the bearing, the packing is always changing, which ensures the tightness of the drum. The most important operation in this case is to remove the bearing and install a new one.

And also replace the stuffing box, which protects the bearing from moisture.

When the washing process is delayed due to the slow heating of the water, it is necessary to inspect the tubular electric heater. More often this element is called short - TEN.

Scale is formed on it over time. In order to slow down the process of scale formation, various chemical preparations are used from among washing and special powders.

Practice shows that they help, but scum is still formed, albeit at a slow pace.

The video shows how to remove and clean from the scum TEN.

Remove scale only mechanically using a metal brush. If, after repair, traces of rust are visible on the surface of the heater, it must be replaced with a new one.

Almost every hostess who is engaged in washing, faced with a situation when from the washing machine water flows out for no apparent reason.

Video:

In this case, the repair is to locate the leak and eliminate the cause. Very often with regular washing, the density of the clamps at the fixation points is weakened.

If water flows in this place, it is necessary to loosen the clamp, slightly move it and secure it again. It also happens that a crack forms in the hose.

In this case, the output is one - the hose must be replaced. Sometimes water flows due to the fact that the seal of the door is broken. Rubber gasket must be replaced or corrected.

Preventive maintenance

Repair of the washing machine is always accompanied by nervous tension, troubles and worries. Especially in the case when it is done by oneself.

In order to avoid unnecessary trouble, you must regularly perform preventive maintenance of the washing machine.

The video shows how the pump is evacuated, which pumps water out of the tank. This pump must be cleaned after each wash.

Video:

Similarly, it is necessary to clean and dry the rubber seal between the drum and the door. Over time, sediment accumulates on the sealant, and it no longer fulfills its functions.

Specialists recommend cleaning the detergent tray. If you follow these simple recommendations, then a major repair of the washing machine in the coming years will not be required.