Brick mesh for brickwork: instructions for use

Today, the range of building materials allows you to create a wide variety of buildings and interior elements. At the same time, do not forget about the safety of building structures, as this is the main parameter that applies to most structures. To increase the reliability and durability of buildings, a masonry net is often used. This is a relatively recent technique, significantly increasing the lifetime of the erected building. Also, the metal mesh is useful in those cases where the brick is not of the highest quality.

For many years metal mesh has been used to create concrete fences. It is thanks to the metal material that such structures do not crack and do not fall apart with small damages. The principle of using a metal mesh when building a brick house is about the same. Low-quality brick in a few years will begin to collapse. To prevent this, people cover the surface of the walls with cement or lining. Obviously, this is a serious financial waste, and after a while low-quality building material will again make itself felt.

Manufacture of metal mesh for brick

It is interesting that brick masonry net is made by small enterprises that have at their disposal a small machine. This equipment is used exclusively for contact welding of metal elements. In production, wire of small diameter - 3-5 mm is used. You can also find a grid of low-carbon wire, whose diameter is not more than 6 mm.

The cost price for the production of metal mesh for bricks is relatively low. In large-scale construction projects this product is used almost always.

When buying it is worth paying attention to the fact that it is best to choose in favor of reinforced mesh, which is not much more expensive than usual. At the same time, the reinforced material is not afraid of heavy loads that can arise during the operation of the home.

Application of a metal mesh for bricks

Although the metal mesh is most often used during masonry, this material can also be used in other cases. Within the dwelling, a metal product is used when laying a tiled floor or walls. After such measures, the tile will reliably hold on for years, even if the cement slurry did not have the highest quality.

When building buildings, a metal mesh is used to strengthen the foundation. In addition, this product is an ideal option for reinforcing concrete.

From this it can be concluded that the metal mesh is used wherever concrete is used, a cement mixture or other building material that needs to be strengthened. Most often it's about using a grid in the process of erecting large buildings and other massive structures.

You can also find reinforcement mesh. The large diameter of the metal base allows using this product during the construction of multi-storey buildings and other structures that need high reliability. In some cases, especially when building foundations, several layers of such reinforcing mesh are used. As a result, the design retains its initial properties for many decades.

Using a metal mesh for a brick

During the laying of bricks, a metal mesh can be used in a variety of cases. Most often this material is placed between the levels of brickwork. To ensure that the structure is highly durable, the cement slurry should completely hide the mesh. The material itself should be used in such a way that the metal wire does not protrude from the layer of frozen solution. Later, this can lead to the formation of cracks, and then no construction work will not be able to help restore the strength of the wall.

In addition, you must ensure that the mesh is flat. Any distortion after a while can cause deformation of the masonry layer. If after the purchase the grid turned out to be a little curve, you can use a hammer or pliers to even out the problem areas of the product.

The thinner the metal mesh, the more exposed it is to the corrosion process. Obviously, it is better to buy products that are already covered with an anti-corrosion layer. For the price it is not very different from the usual grid. If such a material is simply not available, an anticorrosion layer can be applied to a conventional mesh. For today in building shops there is a set of anticorrosive mixtures. You can apply them to the grid using a brush. In this process, you need to show maximum attention, since the places on which there will be no protective coating can soon become rusted.

When using a grid, it is important to pay attention to the dimensions of the cells. The most popular now are the following dimensions: 50x50, 100x100, 150x150, and 200x200 mm. Obviously, the material with the smallest cells provides the highest strength of the constructed structure. A grid with large cells is best used in cases where the walls of the dwelling are of great thickness. Also, a large-sized mesh is used to create concrete surfaces and foundations.

When purchasing a masonry net, it is important to read the manufacturer's documentation. Qualitative mesh, as a minimum, must comply with GOST 23279 85, or more modern standards. Only in this case there is a certainty that the building structure will last for many years. Sometimes in the composition of the protective covering of the grid, manufacturers can add completely new compounds that best influence the durability of the building. Before such purchases it is best to get acquainted with the reviews about the manufacturer.