How to get rid of fogging windows

click fraud protection

In cold weather condensation appears on some windows. On old wooden windows, this phenomenon is much less common than on new PVC windows. Sometimes fogging of plastic windows, or others occurs after insulation and sealing of the slots. Sometimes windows start fogging without any apparent reason.

Contents

fungus-1

This phenomenon is most often manifested in a kitchen with poor extraction. The steam that appears during boiling during cooking, settles and condenses on the cold surface of the glass. The appearance of condensate inside the unit - indicates its depressurization and the only solution will be to replace it.

1368781332_plasik-okna-zapoteli

Causes of condensation on window panes

  1. Condensate is essentially the transition of steam to a liquid state during the transition of the "dew point".The main reason for the appearance of moisture on the windows is the decrease in air in the street and the increased humidity in the room.
  2. The state of ventilation has a significant influence on the appearance of condensate. With the onset of cold weather, many try to keep the heat as much as possible and neglect even the elementary airing of the room.
  3. Often the appearance of a tear on the glass contributes to excessive sealing. But it also happens on the contrary, when warm and moist air penetrates the gap between the windows and collides with the cold glass.
  4. In the apartment, there are many sources for evaporation of moisture. People themselves, breathing out the air, increase the humidity of the air. There are also aquariums, flower pots, a bathroom and a kitchen.
  5. Heavy and dense curtains can inhibit ventilation and natural air circulation. Often, the replacement of heat sources affects the microclimate that has settled in the house.

why-sweat-plastic-windows1

Glass fogging in wooden frames

  1. Old wooden windows rarely fogged up. This is due to the traditional methods of installation. In the opening of the window, under the standard frame, during installation, a stock sand cushion was provided, which leveled the moisture balance and provided a drain for condensate.
  2. After replacing old wooden windows with new ones, the drainage overlaps, and the windows start to fog. Radiators of heating, specially located under the window apertures. The warmth that comes from them not only heats the window panes, but also contributes to the general circulation of air in the apartment.
  3. New large and wide sills can prevent the flow of heat. Thermal screens will help to overcome such a disaster. They are easy to manufacture even on their own. Narrow plates, covered with silver foil, are fixed at an angle of 30 ° or 60 ° relative to the source of heat to the window unit on the windowsill.
  4. Incorrect operation and errors in preparation for the winter period can lead to condensation. When preparing windows for the winter period, pay attention to the condition of the rubber seal. It must be elastic and evenly glued along the entire perimeter of the window frame.
  5. Periodically the rubber sealant needs treatment with an alcohol cleaner, make sure that the rubber does not dry out and does not lead to depressurization. It is inadmissible to get into the grooves of dirt and dust. If the rubber sealant has become unusable, it is easy to replace it yourself.

okno_ustroistvo

Ways to combat the fogging of plastic windows

  1. An old and proven way to put a thick decorative candle on the windowsill. Such candles are designed for several hours of burning. The effect of burning candles will manifest immediately, the flame of the candle promotes active movement of air, although it emits little heat.
  2. At the same time, fix all leaking faucets, cover the aquarium and prevent the exhaust systems. Remove from the window sill flower pots. You can put a fan on the window sill and direct the airflow to the window, and wipe the glasses with a damp cloth soaked in vinegar. Wipe at least once a week.
  3. There is still an old folk remedy for fogging windows in an apartment. A solution is prepared, which contains one part of medical glycerin for 20 parts of pure alcohol. A few drops of aromatic essential oil are added to the formulation. It is recommended to wipe this mixture at least once every 15 days.
  4. In the car dealership are selling various chemical agents from fogging windows. You can use them. Such means are applied to the dry and clean surface of the glasses. The effect of using such drugs is short-lived, expensive and unsafe for health.
  5. If the fogging of PVC windows occurs in the middle of the double-glazed unit, then there is a depressurization. It is impossible to solve the problem independently. Closer to summer, he evaporates, but with the onset of cold weather to appear again. Masters, of course, can try to restore the sealing, but most likely, you will have to replace the double-glazed windows. Best of all behave double-glazed windows. Now there were PVC windows with two modes - summer and winter, you just need not forget on time, translate the modes by the seasons.
  6. Often the reason for fogging the windows of plastic windows are errors in installation, installation and design. Incorrect slopes or a skew that is invisible to the naked eye can contribute to improper heat transfer and cause the appearance of condensed moisture on the insulating glass unit of the plastic window and inside it. Remember that regular airing of the room, at least two times a day, will help in the fight against the fogging of window panes.

instagram viewer