Wooden chair with own hands

Presence of an armchair in the house helps to make rest more comfortable and pleasant, and also gives sensation of ease and calmness. There are many variants of armchairs, they differ in form, purpose, but they are united by the fact that they all make life comfortable. About how to make a chair from wood we will consider further.

Advantages and disadvantages of

wood chair When starting the chair making process,which will act as its basis. In this article, let's talk about how to build a wooden chair. Therefore, we suggest familiarizing yourself with its main advantages:

1. Environmental safety.

Wooden furniture has always been natural, harmless and hypoallergenic. Therefore, it is the wooden chair that will not bring any discomfort in its use, as environmentally friendly material acts as the basis material.

Armchairs made of wood photo:

2. Strength and durability.

Furniture made of wood is strong, resistant to mechanical influences and long service life.

3. Aesthetics and a variety of forms.

Choosing a shape for a wooden chair made of wood, it's hard not to get lost in their diversity. In addition, the use of carving, special paint and varnish materials, can make the chair more aesthetic and attractive.

Furniture made from natural wood is quite expensive, but if you try to build a chair of wood with your own hands, you will save up to three times more money than when buying it.

Wooden armchair with own hands

We offer you to familiarize yourself with the option of making a wooden latticed chair that has an inclined seat and is comfortable and elegant.

This method of constructing the chair is universal, so with its help you will be able to build such furniture as a table, shelf or stool.

To carry out the work, it will be necessary to have:

• beams, section 2.8x2.8 cm;
• plywood, consisting of several layers, the thickness of which is 1.8 cm;
• stains, paints and varnishes;
• threaded sleeves;
• of dowels, screws;
• several studs;
• material for grinding;
• priming and varnish solutions used in woodworking;
• oil paints of black and red colors, which will help the back and legs of the chair to contrast brightly with each other.

Among the tools you will need:

• circular saw blade of desktop type;
• drills with drills;
• of the chair;Planer
• ;
• pliers;
• screwdriver;
• sponges and paint brushes.

Select the beam, the main requirement for this is the section size, it should correspond to 2.8 cm. Pre-prepared blanks must be perfectly even and smooth. Before work, check them for cracks and roughness.

Drawings of a chair made of wood:

In accordance with the drawings, the beam is cut into several slats, the length of each of them is 55 cm. To assemble the back and side walls, thirty-six slats are required. In addition, it is necessary to have load bars installed in the seat area.

Secure the timber with stops and cut it using a saw.

The end sections of each bar should be marked and then holes drilled with a diameter of 0.8 mm are drilled on them. The interval between the center and end point of the bar is 2.5 cm. Using the drilling stand, carefully measure and arrange the parts before drilling them.

In order for the chair to have a presentable appearance and meet all safety standards and regulations, the end sections are treated with sandpaper, and the edges are chamfered.

For rounding the longitudinal edges, a plane is used, and then sandpaper, which will help remove all irregularities and sand the surface. To separate one armchair from the other, parts called "swords" are used. To make them, you need to cut out the wooden elements of a square shape, 2.8x2.8 cm in size. On the edges of the checkers, you need to remove the bevel and drill holes of a through character. These holes must coincide with the slots on the slats for their harmonious connection. To each bar is glued two "checkers" on both sides. In each hole is inserted one hairpin, constructed of cut-off materials. At the edges of the workpiece are glued and leveled using a strip. Using clamps, pull all the parts together and leave until completely dry.

Stain helps to preserve the tree in its original form for many years. For the processing of parts, they should be suspended on a pre-prepared bar with nails or pins. Set all the blanks on the nails and apply stain with a sponge. Surplus stains must be removed with a brush.

After the stain has completely dried, proceed to the next process, including zeros and coating of parts with paintwork materials. To dry the parts, prepare a special unit consisting of a board on which the dowels are pasted.

The next step involves the manufacture of the backrest and seat of the wooden chair. To do this, you need a small sheet of plywood, from which the cut out the workpiece of the desired size. With screws, they are connected together, except for this, provide holes for dowels, which will provide additional strength of the chair. This construction is painted with red oil paint and waits for complete drying.

In the details that were made of the bar, drill holes with a diameter of 0.8 cm in such a way as to ensure unimpeded passage of the studs. Connect all the parts together using studs and threaded bushings. In order to fasten the seat, drill a few holes in the supporting part of the structure. From the bottom of the chair, screw the seat to the body of the chair.

This chair will please with its brightness, beauty and convenience of all residents and guests of the house.

Manufacture of a wooden garden chair: instructions and recommendations

The most harmonious among the flowering plants of the garden is a wooden chair. But, before starting to manufacture it, we suggest that you familiarize yourself with the general recommendations that will help to do this:

1. The first requirement for a garden chair is its transportability. This piece of furniture should not be cumbersome and easily portable from place to place in case of bad weather.

2. When choosing the type of wood, it is better to stop on oak, beech or walnut. In addition to these options, it is possible to use pine, aspen, cedar, and larch. Such a tree is the most durable and stable before mechanical influences and moisture.

3. Since the chair is located on the street, it is exposed to sunlight, moisture and precipitation, therefore it is recommended to take measures to protect the wood from external stimuli.

4. Before using the boards, they should be folded and put in a sheltered room, they will dry out and become stronger under the influence of the wind. After this, the process of their grinding, impregnation with antiseptics and a solution of drying oil will be performed. Then follows the drying of the boards and their coating with paint and varnish materials.

5. The number of knots on the tree affects the texture of its texture. In addition, to the appearance of the chair resembled a natural tree, it is better to cover it with a colorless varnish.

6. When assembling the garden chair, make sure that the fasteners are well recessed in the tree. Otherwise, there may be a catch on the clothes.

Preparatory work includes work with wood, its drying and coating with a variety of materials. For work, use boards, the thickness of which is 2 cm.

In the process of making a garden chair, you will need:

• two rear legs, the size of which is 21h255h788 mm;
• two front legs, the size of 21h76h534 mm;
• of the support armrest, size 21x128x407 mm;
• rear of the chair in the form of a backrest, size 21h280h915 mm;
• jumper - 21h52h590 mm;
• of the rear support of the armrest - 21h78h611 mm;
• two slats for insertion - 13x21x255 mm.

The following materials are required for consumables:

• harddrive keys - 2,4х6 cm - 20 pieces;
• 20 pieces of brass screws, 0.45x0.5 cm in size;
• 20 pieces of brass screws 0.45x0.32 cm;
• sandpaper for grinding;
• adhesive based on polyurethane;
• varnish and varnish for furniture;
• cardboard material;
• paint tape.

For the work on the construction of a garden table, as tools, the presence of:

• circular saw;
• hand-held milling machine;
• electric wire;The
• hacksaw;
• electric drills;
• screwdriver;
• grinders;
• of roulette;
• level;
• of the pencil.

Garden chair in wood, drawing:

Use panels with a wide thickness for the manufacture of the rear legs, backrest, armrest and seat. To obtain them, you need to pick up similar in color and texture boards and pre-glue them.

In order to build the rear legs, use a pre-prepared stencil, on which they will be sawed. Attach it to the board, draw a drawing on the tree, using a pencil and connect the two blanks with the help of an adhesive tape, so you get to make two parts at once. Take into account, it is better to make a pattern a few millimeters more than the drawing, then to plan the part or the milling cutter to the required size.

The procedure for the construction of the backrest includes sawing a pre-prepared workpiece from glued boards. Then it is required to mow the lower back part twelve and a half degrees, so that it harmoniously joins the rear legs. And the upper part of the back is rounded by a radius of 0.9 cm. Next, assemble the product, while adjusting the details to within a millimeter.

Attach the back legs of the chair to the back with screws and wood glue, after having taken care of the drilling of the holes. Using the corner joint, fasten the side pieces and the legs together.

Plugs of plug-in nature will help to close the formed slits. Use screws to fix the inserts. Please note that the reliability of the chair directly depends on the quality of the connection of all parts. The boards should be pointed in opposite directions from the legs. In accordance with the outside of the drawing, cut the boards of the connected parts. Sites of untreated nature are not cleaned.

At the back of the workpiece, select the groove, with the seat at the back to the back, to ensure a tight joint.

Begin cutting out the front legs, with their upper sections being cut at an angle of six degrees. Attach the front legs to the chair design using screws and glue.

The garden chair must be particularly reliable, therefore it is recommended to use an additional jumper in the form of a footstep with which the strength of the chair is strengthened. To cut a jumper, measure the location of the jumper and cut out the part of the desired size.

Now proceed to sawing the wedge-shaped armrest supports that are fixed on the front legs and make the chair more comfortable to use. When all the details are collected, you should proceed to the final grinding of the chair. After completing the process, the surface should remain smooth. If desired, paint the chair in the desired color or cover with a colorless varnish, which will help preserve the texture of the tree.

Armchair rocking chair for two with your own hands

To make such an armchair you will need a minimum set of tools, which consists of:

• jigsaw;
• disc grinding machine;
• screwdriver;
• several drills for working with wood;
• bit for work on the screwdriver;
• paint brush;
• of roulette;
• pencil;
• building level.

This model of the chair is quite simple. The shape of the chair resembles an arc, which consists of two lateral parts, fastened together by a large number of boards.

Pay attention to the material of this chair, since its dimensions are quite large, it will be located directly in the yard or in the garden, which means that the materials must be of high quality. Euro plywood is used in the process of manufacturing the side parts of the rocking chair. Its thickness should be 3 cm. From this material it is necessary to cut out two lateral parts consisting of three rings. The markup is made using a pattern, a pencil and a tape measure.

Scheme for manufacturing the rocking chair:

When you transfer the template to the workpiece, small errors can be tolerated. The main condition for the correct functioning of the chair is the identity of sawing out two side pieces.

Next, you need a bar measuring 5x2.5 cm. Using a jigsaw, saw off thirty-five equal boards, 1.2 m long. In principle, the length depends on the desired length of the chair, so it is subject to adjustment. As fasteners, it is recommended to use:

• confirmations 0.5x12 cm - about 15 pieces;
• self-tapping wood 0.4 x 4.5 cm - 150 pieces.

The first process of work after the cutting of parts is their grinding. To carry out this procedure, if you have a good tool and the skills to work with it, is not difficult. But, please note that the end sections should be given special attention.

Next, you will process the material with a stain and varnish. It is better to apply the solutions in two layers, waiting for the complete drying of each of them. To avoid moisture absorption, treat the wooden parts with a hot drying oil.

The final process is the assembly of the rocking chair. Three czars are located in the upper, central and lower parts of the chair. They are attached with the help of confirmats. Watch for the strength of the joints, since the durability of using the chair depends on them.

For the drilling of holes for fasteners on the seats of the chair, which form its immediate surface, the use of a conductor is recommended. This device will help to facilitate this work and will make all the holes identical. Otherwise, do this work manually.

Use a special putty that will help to hide the holes from the screws. In the presence of cracks or defects, putty will help get rid of them. Now the process of coloring the chair or coating it with varnish remains. A few pillows will decorate this piece of furniture and help make it more bright and comfortable.