How to glue skirting boards on the ceiling, the preparatory moments of
Taking into account a number of recommendations of specialists, and taking into account the features of installing a ceiling skirting board, you can easily implement many interesting design solutions in practice. Ceiling cornices allow you to hide the joint of the wall and ceiling, ugly gaps between the used finishing materials. Proceeding from this, you should carefully choose the width of the skirting for the ceiling. This will be the first condition for the competent installation of this decorative element. Glue the ceiling cornice so that it conceals all the existing defects. Determine how suitable a plinth for these purposes is not so difficult: it is enough to apply it to the junction of the walls of the room.
Next, you need to calculate the amount of plinth for your ceiling as precisely as possible. This is very simple: the perimeter of the room is calculated, and the result is divided by the length of the plinth. As a rule, it is 2 meters. So, if the perimeter of the room is 15 m, then for its finishing you need 7.5 skirting boards. Obviously, in such a case it is necessary to round up the figure in the direction of increase and buy 8 cornices in the store.
Specialists recommend "prikinut" skirting to the ceiling on a piece of paper in a box. After carrying out these simple manipulations, you will become more and more clear how to glue the plinth on the ceiling as efficiently and efficiently as possible.
The basic nuances of mounting
Having purchased the adhesive for the ceiling cornice, you can proceed directly to its installation. As a rule, questions about how to glue this decorative element along the wall do not arise. It is enough to apply a thin strip of adhesive composition to both surfaces of the plinth, one of which is pressed tightly to the ceiling, and the other - to the wall. If the glue has been applied too much, and its excess extends beyond the cornice, then they must be removed using a normal dry cloth.
And here's how to properly glue skirting on the ceiling in the corners, you should tell more. To date, there are two options for mounting decorative cornices in the corners of the room. The first one is easy and simple. In building stores, you can easily find corner elements that are ideally suited to the chosen skirting board. Moreover, they can be sold in the kit, which is especially convenient. They are mounted, like the cornice itself, with the help of glue.
The second option is somewhat more complicated. It assumes an independent pruning of the cornice at the required angle. Proceeding from the fact that usually the corners in the flat are straight and make up 90º, the angle of the ceiling skirting will be equal to 45º.
Trimming the plinth must be done with the utmost precision! Otherwise, the product will become unusable.
For these purposes, a tool such as a chair is usually used. This simple device allows you to control the cutting angle of the skirting board. It represents a product of the U-shaped profile, which has cuts at the appropriate angles. In the stove, the ceiling skirting is laid and cut at the desired angle with the help of a clerical knife or its mounting analog. The cornices cut in this way are joined in the corner of the room and are glued to the surface of the walls and ceiling.
After a direct installation of the skirting board for the ceiling, it is necessary to look around and evaluate the finished result for defects. This is especially important if the cornices are white. If there are fingerprints or other minor defects in the area of the joint, a light silicone sealant is recommended. It can be rubbed into the place of contamination with a small hard brush or a finger in a special glove.
How to glue the ceiling skirting on the stretch ceiling - what to look for?
Members of your family insisted on photo wallpapers on the ceiling, and you have long dreamed of quality stretch analogs and, finally, fulfilled their dream? It is wonderful! But do not you think that something is missing? So, you should pay attention that if you did not purchase a special cap for such a ceiling, you'll have to worry about installing the ceiling skirting. The question of how to glue the plinth on the suspended ceiling is quite relevant, given the popularity of this type of ceiling coating. It is his properties and determine the features of mounting skirting.
At the stage of choosing the ceiling cornice, it should be taken into account that it should be light enough, otherwise the surface of the stretch ceiling will be slightly stretched and sag under its weight. In addition, when installing the ceiling there is always a small gap between it and the wall, which is the baguette element. That's why stick the plinth follows a wide surface to the wall.
Directly when gluing the cornice, it is recommended to use a polyethylene gasket, which is laid between the plinth and the ceiling. It prevents the glue from getting on its surface. It is worth noting that it is quite difficult to remove glue from a stretch ceiling. After the final drying of the adhesive, the polyethylene is easily removed. If necessary, look at how to glue the plinth to the ceiling, the video demonstrates everything to the smallest detail.
Special attention should be paid to the fact that you can not glue the skirting directly to the ceiling. The fact is that in case of dismantling the cornice it will be easy to separate it from the wall, but from the ceiling surface it is difficult. Too great is the risk of damaging not the cheapest ceiling cover. In addition, the stretch ceiling "lives" its life, and with its tension or compression, defects from deformation of the material can form.
Thus, when installing a skirting board for the ceiling, it is necessary to select this decorative and functional element competently, taking into account the installation features in this or that case. As a result, you will be rewarded with an aesthetic appearance of the ceiling and a beautiful, harmonious interior.