Tile for a bath: recommendations for the choice of
There are two types of tiles for a sauna - unleaded and enamelled ( ie glazed).It is best to choose the second type( enameled), because it has passed double firing, which increases its strength characteristics and resistance to temperature changes. The first type will quickly fail.
In addition to the view, it is also important for to select the appropriate surface texture. The front side must necessarily be rough, in order to avoid injuries and falls. The basis of the tile, too, must be chosen correctly. It is usually recommended to use a smooth base, and not porous, since the ability to absorb moisture first is much less.
Plus, , pay attention to the form ( rectangular, square, six- and octagonal), which can be very attractive at times. If the tiles of the bath are to be done by hand, it is better to take a typical square shape for easier laying. Carefully choose glue( water resistant).It will allow to firmly fix the base and the tile so that it will not "slip" under your feet.
Tile for a bath: the advantages of
It would seem that wood is an excellent material for finishing a bath. And with this you can not argue, because it's a natural material. But not always coverings from a tree quickly dry up and are hygienic, because, at times, bacteria can accumulate in the tree and mold can form.
Much more practical in this regard is the tile for the bath floor. The fact is that quickly dries and is easy to care for .With its help, the is easier to organize the slope of the coating( for easy drainage of water into special holes).In addition, the does not develop fungus and mold , and therefore it is also very hygienic.
Additional point that can be identified - suitable ceramic floor tiles in the bath and for finishing the oven. It is the that many cast iron furnaces face, which are attractive in appearance and protected from excessive temperature and humidity changes.
Tile laying in the bath
After the ceramic tiles have been selected, the question arises - how to put the tile on the floor in a bath? In fact, the application process is no different from stacking in ordinary rooms. There are only some nuances that should be considered. In particular, the correct selection of heat-resistant adhesives and mastics( but for this it is enough to come to the store and buy the appropriate ones).However, about everything in order.
The first step is to prepare the surface. It should be dry, clean and even. The laying starts from the most surveyed angle. To do this, they stand on the threshold and inspect the premises( which part is visible).Flooring floor tiles for the bath is not horizontal, but under a slight slope( 1: 100) towards the drain hole. Do this slope solely to ensure that the water does not stagnate.
Then prepare the mastic or cement mortar according to the instructions prescribed on the package. Apply the composition directly to each tile. The "smoothness" of the ranks is controlled with the help of a rake level. Existing excess blends from the edges are retracted with a spatula and used to glue the next tile. The width of the joints between the tiles should be about 2-4 mm. The joints are adjusted by means of crosses.
At the final stage, when the floor tile in the bath is laid, grouting is done. It is necessary to strengthen the joints and prevent the accumulation of dirt in them. Use for grouting, you can also glue the mixture, but with the addition of some pigments( to give the appropriate color).After the remainder of the mixture, rinse with a cloth or a damp sponge.
