How to insulate a shed - answer the most important questions

click fraud protection

What are the ways?

The decision on how to heat a shed is best accepted at the stage of its design and construction. But, if you plan to insulate the building, which is already in operation, then you can do it in two ways: trim the walls and roof with heat-insulating materials or put the stove. You can also combine these two methods.

To insulate the shed, a clay film is often used, applied to walls pre-shrouded with shingles( you can use willow twigs instead).It is fixed at an angle of 45 degrees, starting from the corner of the wall. The clay is mixed with water and sawdust until a creamy consistency is obtained. After that, you can start applying the solution with a large spatula. The layer of such plaster should be not less than 3-5 centimeters. This method is considered popular and quite effective, but modern materials can also be used.

Deciding how to sew a shed, the choice can be stopped on any of the modern materials. But, choosing such a method of insulation, remember that you will have to make a waterproofing, as most insulation materials do not tolerate moisture and when wet they lose their qualities and deteriorate. Its arrangement will require additional investment, so more often for sheds the first method is used.

Note! It is highly not recommended for these purposes to use drywall, as it spoils from a temperature drop.

Furnace heating

The heating of the shed with the help of heating devices is carried out by two types of furnaces that can be equipped in it - metal and brick. Each of them has its own shortcomings and advantages, which must be taken into account when choosing. So, if a barn is used exclusively for storing tools and periodically working in it, it is better to use a metal oven. If the shed is used to keep domestic animals, it is brick.

The shed with the first type furnace is good because the metal heats up very quickly, and it is convenient for periodic work. When you enter the barn, you will not have to wait long for the room to warm up: melt the stove and almost immediately feel the air getting warmer. However, it cools down too quickly, so the room will soon become cold again. The brick oven, on the other hand, is heated for a long time and cools down for a long time, thereby maintaining the necessary temperature for a long time. This way to ensure the heating of the shed is perfect for keeping domestic animals alive.

Important! When installing the oven, it is necessary to provide a place for it that will comply with fire safety standards.

How to insulate a shed: designing

If you only plan to equip a utility room, then, when deciding how to build a warm shed, consider the following factors:

  • For what purposes it will be used: for storing tools and work or for keeping animals and poultry.
  • Based on the purpose of construction, you need to determine the way to ensure and maintain the required temperature.
  • Choosing a heating method, solve the issue with the option of construction.

So, if a shed is necessary for keeping animals, then it is best to insulate it and provide oven heating from brick. If the purpose of the room is to store tools and intermittent work, then it is possible to limit ourselves to simply warming the walls. If you plan a frequent stay in it, then the most suitable option will be a metal oven.

Now decide how to make a warm shed. It is necessary to think in advance where to install the furnace, prepare the foundation and consider the smoke extraction system. This place must be located in a fire-safe area of ​​the room. If the walls are to be insulated, then you should consider the ways of installing all the materials of the insulation and, possibly, mount the crate.

Note! The simplest way to build a skeleton shed with further insulation of the walls.

instagram viewer