How to seal a tire

click fraud protection

How to seal a tubeless tire

Modern tubeless tires are very convenient to use. Even when punctured, they do not lower the wheel immediately, which means that the owner always has the opportunity to get to the car service. I would like to say that qualified help in this matter is almost always better than "crazy hands", but today we will consider all possible situations, including how to seal a tubeless tire in the field.

Why start

Is there any certainty that the tire is really punctured? Nobody canceled ill-wishers and hooligans, therefore, first of all it is necessary to lift the car on a jack and pump up the wheel. Twist it, look, look for a puncture. If a puncture is not detected, and the tire maintains a normal pressure - tighten the valve and continue moving. If possible, visit the tire service.

How to seal a tire

How to seal the

bus If the puncture is

If a puncture is still detected, you notice a screw that is stuck in the tread - it does not matter. If you have a tubeless tire - you will easily get to the nearest tire fitting. Of course, this will adversely affect the tire, but the situation requires a solution, and this solution is optimal.

In spartan conditions

If it's far from the shinomontozha, and the problem has to be solved on the spot, you can help the kit that should always be in your car - it's an ambulance for tires.

The simplest set should be:

  • Special needle with an eye
  • Spiral arm
  • Wound with an impregnation
  • Tubes of the adhesive

It should be noted at once that the repair of tires should be approached very carefully and carefully. In the direction of the screw, try to understand and determine the angle of the hole in the tire. After you have determined the angle, remove the screw and insert an awl into the hole at the same angle. Do it carefully, follow the path of least resistance. Sticking out the holes of steel - take it out.

Take a tourniquet with special impregnation, spread it with glue. Shilom insert the tourniquet into the hole, turn the awl 90% and pull it out with a sharp movement. The tourniquet remains inside the hole in the form of a loop. Do not skimp on the tourniquet, do everything according to the rules. Cut the end of the bundle with scissors, leaving the ends to 2-3 mm beforehand.

Wait until the glue dries, fill the tire with air to the desired pressure. At the first opportunity, contact tire service.

How to seal a tire

How to seal the

tire Repairing the side hole in the

tire In our review article, it's worth mentioning the side holes in tire damage. They have a place to exist, and as a rule, such damage, by their nature, rather big. With such a problem, you can be helped by an extremely shinomotazh. If the width of the hole is more than 5 mm, most likely, the repair will not be possible even for specialists. In this case, we recommend using a spare.

How to seal a tire

How to seal the tire

Spray

There is another way out of this situation - this is a special tightening spray, which is quite popular now with motorists. It is very effective with small damages and becomes a simple and reliable solution to your problem. Fill it inside the tire to the place of damage and inflate the tire. It will stretch across the tire, and if there is a puncture, it will fill it, which will solve your problem. By itself, it is preliminary from the tire to remove the objects that pierce it. But there are also disadvantages to using such a tool: if you want to further repair such a tire in the tire - be prepared to pay an additional denyuzhku for the removal of the composition. And the worse it was, the more you will pay for the removal.

How to seal a tire

How to seal the

bus Conclusion: be more careful and attentive, contact specialists and use only quality assistants in the fight against tire punctures.

instagram viewer