Technique, technology of applying decorative plaster with video lessons.
Before applying decorative plaster yourself, thoroughly clean the surface of the wall. Remove old wallpaper or paint, clean the surface of the dust. If there are irregularities, they should be removed, leveling the wall. Cracks to cover up, having glued a grid-serpyankoj. The prepared surface must be flat, clean and dry. The masking tape is glued to the surface of the surfaces on which it is not supposed to apply plaster. Then the surface is primed with a deep penetration primer. It is most convenient to use an airbrush, but it is possible to primer the surface with a roller or brush.
Decorative plaster is sold either with a dry mix or with a ready-made compound. Dry mixture for cooking should be poured into a stainless, better plastic, capacity, close with water and mix thoroughly with a mixer. Ready plaster should be simply mixed for 2 minutes. If the plaster is white, the color can be added during the preparation( mixing) of the composition. You can do without it, and after applying and completely drying paint the walls with paint.
The technology and technique of applying decorative plaster to walls are shown in more detail in the video tutorials below. Apply the material begins after the primer has completely dried, see the types of primers, characteristics. Apply using a plastic or stainless steel tool. The thickness of the layer varies from 2 mm to 5 mm. If you work with textured plaster, the pattern is created immediately during application. The plaster contains mineral filler. The filler, clinging to the tool, creates furrows. The drawing depends on the direction of the tool: vertically or horizontally, we get the usual "bark beetle", if in circular motions - "lamb", you can do wavy movements, or those that you like.
Using structural fine-grained plaster, you can create a unique relief on the wall. To do this, you can use a variety of tools. The technology of applying decorative plaster with such a pattern is also not difficult. The decorative roller can create a relief similar to grass. You can apply a paralon roller or sponge, a variety of brushes or a crumpled piece of polyethylene. A spatula can smooth out a deep or rough pattern, or create a new one. Flight of imagination is an assistant in creating a unique drawing. The work should be conducted continuously, otherwise the boundaries of the drawing will be very noticeable.
After finishing the work, it is necessary to allow the plaster to dry for several days. Then you can start painting. It is convenient to paint the surface with a wide brush or roller. Instead of paint, you can apply a varnish colored or pearly. To add extra shine to the wall, wax is applied over the paint( varnish).
Decorative plaster video lessons
This video presents the technology of applying decorative plaster "Handyx" with their own hands, very plastic material that opens all possibilities for imagination.
Masters of Superstructure give useful advice, explain how to prepare the walls before applying the plaster, the tools used, the technique of applying
And then see what technology of applying the Venetian plaster themselves, the expert gives good recommendations
Author Kurochkina Svetlana Sergeevna
