The washing machine jumps when squeezing: why is it shaking and jumping, vibration, what to do

click fraud protection

What should I do if the washing machine jumps when spinning?
  • Why does it shake so much?
  • Technical reasons for
  • Which washing machines vibrate more?
  • What should I do?
  • Tips

All washing machines "step" or at least vibrate during operation. Loud sounds accompanying the squeeze, and "jumping" scare many housewives. Sometimes this is the result of an incorrect installation, which can be quickly corrected. And sometimes - sigal that the machine needs repair.

Correct installation of the washing machine by level

Why does it shake so much?

If it's not about breakage or marriage, then the floor washing machine helps:

  • Transport bolts. They are put on the machine specifically to protect the mechanism during transportation. After delivery, they are unscrewed, because they reduce the efficiency of work, and also lead to breakdowns. The exact number and location of these bolts is specified in the instructions.
  • Uneven and slippery floor. Technique should stand on a flat floor. Even in this case, it can shudder when pressed and slightly shift( a couple of centimeters), on the sloping floor, the machines simply roll down. Reduce the distance of "escape" and reduce noise, help special footboards and rugs. Their rubberized material drowns out rattling and prevents "moving" home appliances. If the legs of the machine itself are of different length, then their height is regulated and fixed.
  • Even the serviceable machine will be much swayed when overloading with linens, which was gathered in a com. This phenomenon is called imbalance. To avoid it, you need to take into account that the weight of wet things should not exceed the maximum load of the drum. Wash bed linens separately from small things, often they are twisted in large sheets and duvet covers, creating large and heavy tangles.
  • Often the cause of noise and swinging are stuck trivialities( coins, pins), which forget to clean before washing. Getting inside the mechanism, they become a delayed-action mine.
For proper operation of the washing machine, the transport bolts
The washing machine reloaded with laundry interferes with proper operation and leads to breakage

Technical Causes of

If strong vibration and noise have appeared at the washing machine already during operation, are not the result of overloading, previously not shown, then this is a failure test.

Experienced masters for specific characteristics can determine the specific cause:

  • Wear of springs and shock absorbers - these parts, like the dampers, are not designed for a full life, and the load on them lies heavily. Therefore, they often fail, especially if the manufacturer has saved spare parts.
  • There are two types of counterweight problems: the block itself breaks down or the fasteners that hold it are weakened.
  • Broken bearings are a common cause of repair of the machine, which is characterized by a strong crash inside the machine. Due to high humidity, some mechanisms are corroded, which leads to a complete inoperability of the machine. Broken bearings - it is from these. But this happens soon - after about 5-7 years of work.

If you find any abnormalities in work, it's better not to postpone the repair: breakdown and stopping during work is a matter of time. If the machine simply does not start, then this is luck. Flooded neighbors are unlikely to be happy.

Broken bearing in the washing machine - noisy operation and vibration of the device

Which washing machines vibrate more?

However, some models are characterized by vibration and associated noise initially. You can determine this even when choosing a model.

The system of noise and vibration damping in the machine takes a place and affects the cost. Therefore, less attention is paid to them by inexpensive brands. They save on materials that muffle the sound of the running motor. Loud are also narrow and small-sized models, as well as washing machines with vertical loading. In such firms, they try, despite the size, to create high efficiency( the number of revolutions, the volume of loading).In addition, the area of ​​their support is not sufficient in comparison with the full-size versions. Therefore, if the machine has small dimensions, and the indicators are high, this will affect the noise during its operation.

Washing machine with a top loading in the bathroom - which machine jumps less and vibrates

It is not superfluous to have information about the drum material: a reliable metal contributes to the appearance of noise, plastic, to which there is doubt, behaves more quietly. To ensure quiet operation, even leading manufacturers try to use the optimal sizes of units, provide them with noise insulation and plastic drum.

Plastic drum for washing machine drum for noiseless operation

The noise level is indicated by the technical data specified in the passport( in dB) and on the classification scale. Traditionally, "good" indicators are reflected in the cost. Yes, and this indicator is indicated at the end of the list, so it is rarely paid attention to when buying.

What should I do?

If noise is caused by worn parts, only repair can help. Until the warranty period is out, you need to contact the service, you can not tear up the seals to find out the cause yourself.

In other cases, you can understand what the problem is and fix the situation:

  • When overloaded on the electronic display, an error like UE or UB may be displayed. For machines with front loading, you can see the uneven distribution of laundry over the drum. Imbalance is easier to prevent, if you do not load the machine completely, do not put together large things and small things together. In case of a malfunction, stop washing and turn off the machine. Ensure that the liquid has completely drained from the drum or that an emergency procedure has been performed( as instructed).Eliminating the cause of the imbalance( removing some of the things, dismantling the com), you can turn on the machine and start spinning.
  • The uneven base, the deflection of the floor under the machine also contribute to noise and vibration. Determine whether the unit is easy to stand: lean on it from the side alternately from all sides. If the machine does not move, then everything is in order. If the device "shudders" on the ideal floor, then it is necessary to level its legs. For this, there are special locknuts.
  • Few trifles from the pockets, torn off buttons can be reached by yourself. Flashing the flashlight inside the drum, slightly rotate it in the off machine. Stuck objects will become visible or drop out. If they are seriously stuck, then you will have to call a specialist.
UE error on washing machine screen - overload or incorrect distribution of laundry on the tank
Adjusting the legs of the washing machine for proper operation

If the seals from the washing machine are removed, then you can look for the cause of the noise inside.

Any work must be safe: turn off the device, disconnect it from the outlet by unplugging the cord.

  • Checking the shock absorber. Remove the front or rear wall. Having released the fastening on one side, it is necessary to "shake" the part. If it easily lends itself, then a replacement is needed. In good condition shock absorbers extinguish vibration, showing resistance at similar mechanized shocks. It will be necessary to change both shock absorbers, even if only one does not work. The second had a heavy load, and it will also soon fail. It is enough to take out the fasteners, install new spare parts, fasten them with the same bushings or bolts. The shock absorber is ready for operation.
  • Problems with dampers are reflected on the condition of the covers( plastic parts, fitting parts that move away from the tank).Cracked or damaged parts must be disposed of. To put new, you need to loosen the fasteners, replace the part, pushing the tails of the U-shaped rods. After inserting the replacement into place, gradually loosen the grip, returning the fixing rods into place, and then screw in the nuts and screws to strengthen the structure. Design features can affect this procedure.
  • Counterweight - concrete or plastic parts that reduce vibrations. They are installed in the upper and lower parts of the machine. Concrete options can break due to wear and tear. If the counterweights are in order, and the latches are loosened, then they need to be tightened, and the unfit ones are replaced.

Replacement of bearings requires skills, so it is trusted by masters. The same applies to engine breakdown.

Worn shock absorbers for a washing machine - the reason for poor performance

Tips

Buying a washing machine for vibration and noise levels, think the last. Often this is due to the limited choice due to the small size of the apartment or bathroom. Or after the appearance of a child in the house, noise disturbs a sensitive sleep. How to reduce the volume of unpleasant sounds?

  • Do not ignore the help of special stands under the legs of the apparatus or cushioning carpets. They will help with problem floors, and even floors will be protected from traces of hard supports and chips.
  • Using cabinets for a conventional and built-in machine, consider that they need a few centimeters to move during spinning, and leave a small margin of space. Otherwise, the cabinet will not last long.
  • Some owners glue the soundproof layer behind the wall of the stylalki. So you can protect the walls and body of the device.
  • Calculate the exact weight of wet laundry is difficult. Therefore, leave the machine at least one-third when loading laundry. It's enough.
  • Wash large and small items separately. Separate large sheets and details of clothes, so that initially there was no twisted linen in the drum. In a wet form it is difficult to unravel.
Shock-absorbing stands under the feet of the washing machine against vibration and noisy operation of machinery
Washing machine in the closet - the right location

Of course, there is no eternal technology, in the course of time you will want to upgrade old units to new and functional devices. However, the service life of large household appliances can be more than 10 years with a careful attitude. If you do not pay attention to the malfunction and extraneous noise, rocking the machine, this will not only result in a sudden repair of equipment, a flood, but also a large expense. A careful attitude towards technology and observance of simple recommendations is the way to reasonable savings and planned pleasant purchases that will bring you pleasure.

Sorted laundry according to size and color for washing in the washing machine

instagram viewer