Brick oven for the garage - comfort in all seasons

click fraud protection

Building a garage for yourself

Building a brick shelter for a car is a complex, expensive and time-consuming exercise. The garage brick is built with their own hands in the following sequence: foundation, erection of walls, roof installation, interior decoration. Before the construction starts, you need to determine the size of the building. So, the standard dimensions of the car are approximately equal to 2х3-4 meters, so for a comfortable stay in the garage its dimensions should be 4х6 meters.

When determining the dimensions of a garage, it is important to take into account that the machine can be changed in the future. In this regard, the project must take this opportunity into account without the need to rebuild the garage for another car.

The foundation will not carry serious loads, so it can be made shallow, protruding above the surface by 100 millimeters. The masonry of walls is carried out by a brick of mark M100 on cement-sand mortar of mark M75.It is necessary to reinforce with the help of wire. The floor is made of concrete with a thickness of 150 millimeters with reinforcement reinforcement in a step of 200x200 millimeters. The roof can be made of reinforced concrete floor slabs or made of wood.

Construction of the

heater It is important for garage owners that the heater does not take up much space in the room. Also pay attention to the following items:

  • Fast warm-up of the room;
  • Possibility to boil water, dry clothes and building materials;
  • Easy to operate;
  • Availability of chimney for the period of inactivity of the device.

Note! Find a scheme that will ideally suit your garage is not always possible, so you need to be prepared to make some design changes in the course of work.

All these requirements are met by a brick stove for the garage. Its masonry in many ways is similar to the laying of a simple stove, with the exception of more compact dimensions. There are many different options for this heater, so before starting to install it, you should select the circuit that best meets your requirements.

After you have decided on the type of stove, you can start laying it. First of all, we prepare the workplace, putting on it a film of polyethylene. Further on it we pour out sand a layer in one centimeter. On this basis, brick masonry will be made, on average, 11 rows. According to the scheme, in each new series we make our own additions. After the oven has been laid out, its seams need to be cleaned, the surface is finished with putty, whitewash or overlaid with tiles.

Brick oven for a garage without insulation - money for wind

The construction of a brick garage does not always involve its insulation, and even a heating furnace can not provide a comfortable temperature. This is due to the fact that the bare brick has a high thermal conductivity, and all the heat that the heater produces, quickly disappears because of this. In order for this not to happen, it is necessary to make the insulation of the brick garage.

Note! Quality is considered insulation, when the temperature in an empty garage is equal to five degrees.

The best material for this purpose is mineral wool. However, it needs to arrange a reliable protection against moisture, installing a vapor barrier. Mount the material best with metal angles. On the wall, a surface is marked for mounting the battens in increments of 60 centimeters( this is the standard width of mineral wool).Next, a crate is fixed and mineral wool on it. The heat insulation material must be cut so that the sheets of material come in close contact between the bars of the crate. At the top of the heater, attach the vapor barrier.

When deciding how to insulate a brick garage, you need to decide whether you need to do this from the outside and inside. External insulation is mainly needed in detached garages. If the garage is adjacent to other buildings, then it will be enough to trim it only from the inside.

instagram viewer