We remove dried wiping foam with available means

click fraud protection

Contents

  • 1 When the foam gets in the wrong place. ..
    • 1.1 Dimexid medicament removes traces of construction foam
    • 1.2 Vegetable oil
    • 1.3 Direct sunlight
    • 1.4 How to fix the "tool of labor" after the completion of work
    • 1.5 Removing the foam from plastic and glass
    • 1.6 Remove the dried foam from the hair

When answering the question - how to clean the dried mounting foam, you need to find out its chemical composition, determine what solutions can be without a traceremove such contamination. There are many special liquids that can effectively eliminate hardened foam from wooden, metal, plastic surfaces. And what to do, when the product fell into your hands, body or face? This building material consists of polyurethane foam, has a high degree of adhesion and strong adhesive properties. That's why it's so hard to clean off different surfaces. But this must be done! Than you can wash the mounting foam from wooden products?

When the foam hit the wrong place. ..

In such cases it is very useful to use acetone, it dissolves the liquid foam right before your eyes. But he will serve as an assistant until the composition withers. And after that, only mechanical or chemical means will be required.

  1. A metal brush, scraper or knife is used. Solid pieces of building materials are first carefully cut off, and after they are rubbed with sandpaper.
  2. Special cleansers for hardened foam: Platina Cleaner, Russian Professional, Purex, PENO-OFF, HOBBY.

Ways of using such products.

The balloon is shaken and sprayed onto the contaminated areas, after ten minutes, the foam remains mechanically removed and the surface is wiped with a cotton rag.

Attention: should be monitored for the area of ​​the cleaning solution, otherwise it is possible to remove paint, varnish and other protective materials together with the foam. It is strictly forbidden to spray the can near the fire!

You can completely abandon chemistry, try to wash the dried foam with folk remedies.

Dimexide medicinal preparation removes traces of construction foam

Dimethyl sulfoxide can be purchased at any pharmacy at a symbolic price without the permission of the doctor. Work with him must be neat, the product is absorbed into the skin and has an effect on the person's well-being.

The procedure of the following:

  • dress up rubber gloves;
  • a concentrated solution in pure form is applied to the contaminated areas for 40 minutes;
  • the foam is removed, the stains are brushed( if the product was applied on clothes, then after cleaning, it should be well stretched).

Vegetable oil

Apply for 30 minutes to the remains of dried foam and easily removed with a normal cloth. Such a tool will be just right when the building material hits the face, arms, body.

Laminate, linoleum are perfectly cleaned by all national and chemical methods.

Direct sunlight

This is not a joke, really in the sun the mounting foam has properties to change its structure and gradually break down. This method will perfectly clean old favorite jeans or carpet surfaces that can be hung out on the street and from time to time "knead" the contaminated sites.

To wipe off the mounting foam from the clothes, you can try using a special cleaner, then soak in powder for a few days, and rinse thoroughly. The spots may not disappear without leaving a trace, but it's for sure to discolor and remove the dirt from the fabric materials.

Instruments
Widget from SocialMart

Warning: should not be washed off with scum water. So, it penetrates deeper into the material and withers harder.

How to fix the "tool of labor" after the completion of the work

It is not easy to clean a gun from mounting foam, and sometimes it is impossible. It should not be disconnected from the cylinder while construction work is in progress. Every day, you need to wash the tube with a special solution, white spirit or acetone.

If the gun is no longer being cleaned, then you need to disassemble it. It is necessary to untwist the crown of the landing nest and pour into the solvent. After assembling the mechanism. Still it is possible to dig a hole with a thin wire, to shake out the frosted foam from a pistol.

So the functionality of the device will be maintained properly throughout the time of installation.

Removing the foam from plastic and glass

Than clean the frozen foam from the plastic windows? To do this, you can use a conventional oil solution. We apply sunflower oil abundantly on the contaminated area, withstands 30-40 minutes and after intensive washing with a rough liner of a sponge for washing dishes. When the stain has practically disappeared, it is allowed to wash the window with a solution of an economic 75% soap or detergent.

If the frame of the window is wooden, the foam remains can be wiped with sandpaper and painted over the surface.

Remove the dried foam from the hair

If strands of hair are contaminated with mounting foam, then remove it requires a cardinal method. Cut off the hair pasta. Or try using the popular Dimexid. It is important to be cautious, because the medicine is potent and fast-paced. Use of chemicals is strictly prohibited!

But to clean stains from the mounting foam of upholstery furniture or other dense fabric coverings can be scraped off with a thin blade or a sharp knife. Wash with a powder with a special stain remover. When contaminating delicate fabrics, it is better to turn to dry cleaners to avoid leaving a burnt stain on velvet, silk and acetate.

Caution: foam is "afraid of cold", the stained item can be put in a bag and shoved into the freezer. This applies not to bulk fabrics, different kinds of clothes. After frost, the foam can be easily removed by hand, it becomes supple and fragile. Then the thing is carefully erased.

That's how you need to clean the fabric from the mounting foam!

Such simple and safe ways of removing stains will help to keep fabric things, wooden, glass, metal and plastic materials safe and sound. And when using chemicals, you should be careful and strictly follow the rules for the use of flammable solutions. The following video how to clean the mounting foam will tell users about the nuances and options for removing traces of this building material on various surfaces.

Caution! Effects of skin contact remover Penosil video watch

instagram viewer