Adjustment of the plastic window by yourself

click fraud protection

Adjustment of the plastic window by yourself

During the operation of the window, the question may arise as to how to adjust the plastic window.

Do not immediately call the master to do a repair of the rotary locking mechanism.

Adjustment of plastic windows with their own hands is not an easy task, and minimal amount of money will be spent.

  • Clear drafts
  • Winter-summer mode adjustment
    • Switching the window to the "winter" state
    • Going to the "summer" state
  • Troubleshooting the handle of the plastic window
    • Replacing the handle of the plastic window
    • The handle of the plastic window wedged
    • The handle is hard to turn
  • Window adjustment horizontally and vertically
    • Horizontal adjustment
    • Vertical adjustment
  • Repair of plastic doors
    • Adjusting the doors horizontally
    • REulirovka doors Vertical adjustment
    • pressing

doors eliminate drafts

windows are arranged so that they do not have air vents. To ventilate the room, the leaf must be moved to a specific position.

In winter, the gap between the frame and the leaf may seem too large, because the frosty air in large quantities passes into the room.

This problem can be eliminated by adjusting the hinges of the slewing and locking mechanism. After watching the video, you can visually observe the repair of the window.

At the beginning, the window must be opened in the ventilation mode, then press the upper hinge. With the onset of spring, you should return the clamp to its previous state.

Video:

It happens that air passes through the cracks of the closed window. To determine the place where there is a draft, it is worth bringing a lit match to the closed window.

There, where the flame will fluctuate, it is necessary to carry out repairs. Those loops need to be regulated, to which the draft is closer.

There are two ways to fix this problem.

First - adjustment of eccentrics:

  • they must be moved clockwise;
  • for rotation of eccentrics it is possible to use tools: a wrench, pliers;
  • The eccentric should not be turned a long distance, 1-2 mm is enough;
  • if necessary, then the leaf can be loosened by turning the eccentric opposite the movement of the hour hand.

Adjusting the plastic windows by adjusting the special clamping mechanism is the second way to eliminate the draft. On the frame on the hinge side, the instruction recommends finding a pressure plate.

It needs to be adjusted by turning the key clockwise. The tongue extends, and the leaf adjoins the frame more tightly.

Winter-summer mode adjustment

The adjustment of the plastic windows to the "winter-summer" mode is done without the help of a master, without spending money. For this, the position of the pivots changes, either weakening or reinforcing the clamping of the sash against the window frame.

For convenience, you can see a video showing the repair of the PVC window.

Video:

Plants that manufacture plastic window constructions, provide an average position of the trunnion.

The leaf does not press very tightly, but it does not allow air from the street to enter the room when it is closed.

Switching the window to the "winter" state

In winter, it is necessary to maximally press the sash against the frame. Changing the position of the eccentric will increase the load on the seal. Zapfa pulls a little on himself, moves to the right.

The distance from the accessories to the roller should be minimal. The correctness of the installation can be checked by a notch on the roller - it should be directed to the seal.

It should be noted that windows that were installed recently, it is not recommended to translate into a "winter" position.

Changes in the rotary-locking mechanism during the winter deform the sealing material. In the spring, he may not recover.

Going to the "summer" state

By the middle of spring, comfortable weather is set, the PVC window should be moved to summer position. To do this, the trunnion is pulled and moved to the left. The correct translation of the roller will help notching.

After moving the trunnion, it should look at the handle of the window.

Video:

After adjusting the stud, the load on the sealing material is reduced, resulting in increased airflow from the street.

A similar roller position is recommended for all PVC windows: in the summer the window opens and closes many times, the sealant should not experience heavy loads and deformations.

Troubleshooting the handle of the plastic window

When it becomes necessary to replace the handle of the window with a new one, install a stopper, fix the loose handle, you do not need to consult a specialist. Self-repair can be done very quickly.

Replacement of plastic window handle

Not always the handle is changed due to its breakage. Little children can open the sash by themselves. For safety, it is recommended that you install a handle with a built-in stopper.

To replace the handle, turn it in the opposite direction. Screws that are under it, unscrew, the old handle is removed and a new one is installed.

You can use a screwdriver when unscrewing the screws.

The handle of the plastic window wedged

It happens that when the handle of the window is rotated sharply, it jams. This situation is not a breakdown. The handle was locked to prevent damage to the window.

Sometimes the blocking happens unexpectedly, but there is no need to call the master. You can repair the handle yourself and return it to its original position.

Photo:

Before taking any action, you need to determine which brand of accessories. It is indicated on the constipation of the product.

On the hardware, on which there is the inscription "AUBI", it is necessary to find a plate of metal with a spring. The plate should be pressed against the sealing material and turn the handle.

It is important to observe the vertical position of the leaf. A deviation at any angle will prevent the handle from turning, as the upper blocker will work.

After bringing the window to the vertical position, the handle will easily turn and you can close the door.

If the brand of accessories "Roto", "GU", the other, it is recommended to find a tongue made of metal, it is located below the handle. On it it is necessary to press, as a result of which it will be established parallel to the sealant.

The handle will turn into the desired position without effort.

If, over time, the window is deformed as a result of the temperature regime, the tongue may not reach the counter element. As a result, the handle will not turn.

Use a screwdriver to unscrew the screws of the counter element, place any material( piece of plastic, screw) between the frame and the blocker.

The coupling of the "bounce" with the blocker will increase - the handle will immediately turn.

Handle hard turning

The cause of the hard turn of the handle may be a dried lubricant. In any specialized store you need to purchase a penetrating lubricant.

A tube is installed on the cylinder with the tool, and all the fittings are lubricated. After such simple operations, the handle will turn easily.

Video:

Adjusting the window horizontally and vertically

The deterioration in the work of the hardware may be due to the skewing of the casement relative to the frame.

Adjustment of plastic windows vertically, horizontally carried out independently.

Horizontal adjustment

Window mechanisms may not function well because the window has sunk in height and does not close. The window can be adjusted horizontally on window hinges.

On the upper loop, you need to find the holes where a special device is inserted - a hex wrench.

When the sash is open, the key is recommended to rotate in the direction of the arrow of the clock.

As a result of such actions, the leaf will move away from the hinge, and the lower part will lower. Lubrication of accessories should not be dried.

Video:

With the window closed, you can also adjust the canopy from the bottom. In this case, all actions must be performed outside the window. It is allowed to move the leaf no more than 1-2 mm.

The instruction how to make similar actions, is contained in video lessons.

Vertical adjustment

You can adjust the window vertically by adjusting the hinged loop, which is located below. First you need to open the hinge cap.

Use a hexagonal wrench to rotate in the direction of the clockwise movement, if the flap needs to be raised. The frame will lower the movement against the clock.

It is permissible to shift the frame by no more than 1-2 mm.

Video:

Repair of plastic doors

Plastic doors are as popular as PVC windows. But in the process of operation they must be repaired. Instructions presented in the video lessons will help to cope with all the difficulties.

Adjusting the doors horizontally

If the door leaf clings to the threshold or at the top of the door frame, then it's time to adjust it horizontally.

For this, the door is pressed against the hinge part and the longest adjusting bolt is tightened.

The door must be moved until the web is horizontal in relation to the floor and top of the door frame. Grease the hinge must be fresh.

Video:

Adjusting the doors vertically

If the entire length of the canvas clings to the floor, it is likely that the door has come down and needs to be raised. Such a defect occurs due to improper installation or due to temperature influence.

You need to find a screw that is located vertically on the bottom of the fittings. To raise the door, the screw needs to be tightened a little.

Adjusting the door clamp

To increase the pressure of the door from the hinge side, you need to adjust the third screw of the hinge.

The door handle on the hand side in some models of the product is adjusted by turning the cams. They are located above, below, in the middle.

If there are none, then the doors are repaired by turning the stud. By notching, you can judge whether the turns are done correctly or not. Lubrication must be present on all mechanisms.

instagram viewer