How to detect gas leakage with the help of special devices
For continuous monitoring of gas leakage, special sensors are used, they are called either gas analyzers or gas detectors. This device is something of a type of alarm system, which, after detecting an unacceptable gas rate in the room, beeps.
Such sensors are recommended to be installed in the kitchen not far from the ventilation duct or near the window. Before attaching such an alarm, you should carefully study the climate of the room, as the high temperature in the room can lead to a breakdown of the gas alarm.
A frequent cause of sensor failure is the installation in places where they spend a lot of time under the sun. If the attachment of the device in such a place can not be avoided, then a sunscreen is installed on it.
It should be noted that the gas detector should always be clean, since the slightest dustiness can be the cause of malfunction of the device.
For a visual representation of how this sensor works, you can watch the video.
How to determine the leakage of gas yourself without using special sensors
The most reliable way to determine the gas leak yourself is to feel a specific odor. Just as there was a leak, in the place of the breakthrough, the fuel will come out with a certain sound, it will be like a whistle.
There is another method - it's to smear a suspected breakout spot with soap foam and if it starts to swell, then there is a leak.
It is absolutely forbidden to check gas breakthrough by lighting a match, as it can suddenly explode. It is also not recommended to turn on the light, the slightest spark causes ignition.
How to eliminate gas leakage
First of all, after determining that a gas leak has occurred - it is necessary to close its supply and call the master. Also, avoid raising the temperature of the air until the failure is eliminated. It is not recommended to use electric switches - they can cause a spark, which is not permissible.
Before the appearance of the master you need to ventilate the room, for this you need to open windows and doors.
If the gas is lit, this means that as long as there is fire, it will not explode, so you do not have to extinguish your ignition yourself. In this case, as soon as possible leave the room and call firefighters.