How to cut at an angle of 45 degrees

click fraud protection

What you need to cut by 45 degrees

In order to start the work on sawing at a 45 degree angle, you need to prepare a number of tools and materials:

  • Stool.
  • Saw.
  • Material for sawing.
  • Transporter.
  • Simple pencil.
  • Clamp.

How to saw at corners: action plan

Work on sawing at a 45-degree angle consists of several step-by-step actions:

  • Preparation of a corner pattern.
  • Acquisition of a chair.
  • Fastening of a box of a chair.
  • Slotting.
  • Processing of sawn timber.
  • The process of sawing.
  • Features of the sawing process.

How to saw off an angle of 45 degrees: a step-by-step instruction.

Step 1: Prepare the template for the angled saw

This tool is an inverted P shaped profile. Along the sides there are cutouts for sawing at an angle of 45, 60 and 90 degrees. More complex angular patterns or chairs have devices for setting different angles of sawing.

Step 1: prepare the template for the angled cut

Step 2: The best way to saw off a 45 degree angle is to saw the

for an inexperienced master. The best option is to purchase a ready-made chair in a construction shop. At home, it can be made from three planed boards or plywood.

Step 2: The best way to saw off a 45 degree angle is to saw

The tool can be assembled by fastening together pre-prepared parts. The corner-pattern box must be secured with joinery glue or screws. The side walls of the chair must be strictly parallel to each other. The horizontal bar should create a strict perpendicular with lateral.

Step 3: we plan the cuts at different angles to cut the laminate, trim, etc.

The application of the slots will affect the accuracy of the work performed in the future. Therefore, this process needs to be approached with special painstakingness. It is desirable to make the cuts with the same hacksaw that will be used for the work.

Step 4: Preparation of the material, which must be cut at an angle of 45 degrees

It is necessary to fix the finished corner pattern on the desktop with a clamp. Next, the workpiece should be marked with a future cut. Next, you need to combine the workpiece with a 45-degree incision inside the chair and press it tightly.

Step 4: Preparation of the material to be cut at an angle of 45 °

Step 5: sawing at the desired angle

The saw blade must be inserted into the corresponding grooves of the corner pattern and cut the workpiece. The grooves will limit the movement of the saw and the propyl will be realized in the desired direction.

Step 5: sawing at the right angle

Subtleties of work with a chair and various materials

When sawing such elements as plinths, it is not always necessary to make propyl in 90 degrees. After all, the walls in the room can be uneven. Before cutting the plinth, it is necessary to correct the angle of the cut.

Thus, the article described and described the process of sawing wooden materials with a chair.

instagram viewer