Rules for installing electricians in the bath

One of the favorite ways to relax your mind and body is a bath. This is a frequent attribute of a modern country house. Building your own bath has a number of nuances. In addition to building a room, you need to properly equip it. The duration and safety of the operation of electricians depends on how competently the wiring is installed. https://ermak-termo.ru/.

General requirements

Due to the high temperature and humidity in the bath, special rules are imposed on electrical wiring.

Requirements for the installation of power lines in the bath:

1. Protect all wires from ignition.
2. The electrical panel must be equipped with an RCD with a trip current of not more than 30 mA.
3. It is forbidden to install switches and sockets inside the steam room.
4. The cable for the bath must be fireproof with double protection and three copper wires.
5. Laying cables above the oven is prohibited.
6. It is necessary to organize grounding.

Before starting the installation of electrical wiring, it is necessary to clarify how the existing work plan meets the basic requirements and correct the errors found.

Switchboard and load calculation

All electrical wiring diverges from the switchboard. It must be mounted introductory circuit breaker and outgoing circuit breakers for each consumer of electricity.

Rules for installing a switchboard:

1. The shield must be freely accessible.
2. Adequate lighting must be provided in the room with the shield.
3. The room must be ventilated.
4. It is forbidden to place shields in the steam room.

To select the power of the introductory machine, you need to know the total load. To do this, the nominal power of all devices used in the bath must be summed up and divided by voltage.

Instructions for installing electrical wiring in the bath

The wiring in the bath is powered from the input switchboard. The main thing is to follow the installation rules.

Stages of wiring installation:

1. Connecting the input cable.
2. Power supply to additional cut-offs for individual rooms.
3. Installation of a lighting system and sockets in the bathroom.
4. Cable wiring from the box to the lighting fixtures.
5. Connecting the ends of cables of the same color into junction boxes.

The electrification of the steam room requires a competent selection of materials, compliance with the installation technology and proper connection of the system. Compliance with all requirements will be the key to safe and comfortable operation of the bath.