Advantages of
glue Any wallpaper for nonwoven wallpaper contains special ingredients that prevent the formation of an environment that is favorable for the appearance of mold and mildew. This is a significant advantage when choosing a composition for rooms with high humidity( where the fungus usually develops).In addition, it also has other advantages, which we describe below.
- Does not contain any impurities or harmful to human health components.
- Easy to use. Literally after 10 minutes, a ready-made solution is obtained for further use.
- Has excellent adhesive properties and is easy to apply.
- Practical and economical, out of 800 grams of dry mixture comes about 10 kg of finished glue.
- No lumps are formed during cultivation, and does not leave stains when applied.
- Does not come into any reaction with paints, which are used to further color the wallpaper.
- The ready-mixed mixture can be stored in a sealed container for 10 days.
Method of preparation and consumption of the mixture
The contents of the package are poured into enameled dishes and diluted with cold water. In the process, it is important to constantly mix the mixture until a thick and astringent mass forms. Then you should wait another 5-10 minutes, until the glue swells and continue stirring. If you want to make the composition even more liquid, then add water( about 150 grams per liter of the prepared formulation).Next, the wallpaper is glued to the wall. It is believed that the best adhesive for non-woven wallpaper - brand KLEO, Metylan, Quelyd and some others.
Adhesive consumption for non-woven wallpaper depends on the type and structure of the fabrics. As already mentioned, from 800 grams about 10 kg of adhesive are prepared. This composition is enough to paste: 66 m2 of non-woven, 16 rolls of vinyl, 50 m2 of fiberglass cloth, 75 m2 of structured wallpaper. Also important are the tools by which wallpaper is pasted. For example, the use of a roller or brush increases the consumption, and the application of the wallpaper-mask device, on the contrary, reduces.
Preparation of substrate and method of applying wallpaper
The surface must be smooth, smooth and clean before applying. It should not have cracks, bituminous and grease spots. That is why it is first cleaned, then ground and shpatlyuyut. After the base is ready, apply glue with a special brush or roller. It should be noted that the width of the layer should be greater than the thickness of the wallpaper. In the projections, on the ceiling and corners, it is important to apply the composition very carefully.
Pasting of walls with wall-paper is made without preliminary cutting of rolls. The first cloth must be applied from the window or corner of the room, retreating 40 centimeters. Paste it from the top of the wall strictly vertically. After that, smooth with a rag, squeegee or brush in the direction from the center to the edges. In this case, the surface is leveled, creases are smoothed, air bubbles are eliminated. If there are excess glues along the edges, they are wiped off with a damp cloth or sponge.
The canvas is cut at the bottom of the skirting boards with a special knife. The second canvas is applied by a "butt" method to the previous one. Holes for switches and sockets do not need to be cut beforehand. Only when the coating dries, cut out with a knife. For the battery it is important to cover the wall to a depth of about 10-20 centimeters. And the rest of the place is painted with paint under the color of the wallpaper. If further staining of the entire surface is expected, this is done 2 hours after pasting.