Gasometer for a country house: reviews, prices and the cost of filling the tanks

The need to provide heating of a country house there is the owners during the cold season often enough, as is not always of a heating and gas pipelines lie in close proximity. And in such cases, it is worth considering an autonomous gasification, which will heat the house and cook. Consider one of the most optimal solutions to this issue - gas tank for a country house: reviews, prices and features of popular models.

Gasometer: what is it and what is its role in the autonomous gasification system

To find out what is the function of the gasholder, and what is its role in the independent heating system, a general outline and define the purpose of each item:

• gasholder - a receptacle which is located under the ground and serves for storing a liquefied gas;
• gas holder provided on each Control and safety device;

• from the gasholder to house passes pipeline, which is responsible for the supply of fuel to the heating equipment;
• also provided valves;
• automatic cycle is completed, is intended to control the operation of the entire system.

As can be seen, the role of the gas tank - storage of liquid fuel, which is required for the heating power in cases where the connection to the central gas supply is not possible. The optimal solution in this case - buy gas tank. Prices for design, their size and functional characteristics will be discussed later.

Gasholder for private homes: the characteristics and features of the devices

Externally, the gas tank is a fairly large cylindrical tank, which has a range of functional additions designed to make it safe to use. Among the complementary elements stands out:

• parts intended for mounting to the base of the container, the role of which, as a rule, perform the concrete slab;
• a plurality of valves intended for different purposes: connecting the container to the gas line, fill gas, and removing accumulated condensate;

• necessarily provide a safety valve for relieving excess pressure in the system and prevent it from destructive impacts;
• another safety valve performs the locking function and prevents an excessively high pressure in the pipeline system;
• special two-stage regulator is used to reduce the pressure immediately before the gas enters the pipeline, since component in the vessel is usually much higher than necessary for consuming device.

Besides all this, the gas tank must be equipped kondensatopriemnikom, sensors which indicate the occupancy level of the tank and the pressure therein. To prevent corrosion in the containers provided for cathodic protection system.

There are two methods for separation of gas tanks types: depending on where they are placed, as well as off-axis location. In the first case is isolated above and below ground pattern, wherein the former have a considerably smaller volume. In the second case - horizontal, which are preferred for heating and vertical homes.

Useful advice!When choosing a suitable location for the gas tank to give, you must take into account the recommended distance from the house of its location, as well as the convenience of further adjusting the machine to fill the gas.

Autonomous gasification of a private house under the key: the cost and the list of necessary works

Arrangement gas heating system - a complex process which involves many steps. Let us consider each of them, their cost, and spend the assumptions for the different sizes of homes.

Carrying out installation work will include the following steps:

• excavation pit for the gas tank;
• setting and fixing the tank;
• installation of the gas pipeline system and its connection to the consuming devices and gas tanks;
• filling the gas tank of liquefied gas.

The main determining factor of the cost of all works - the volume of the tank installed. This is determined by which area of ​​the house will be heated. Also affects the model and manufacturer of the container and the gas system.

Note!To be sure of serviceability and safety of the gas heating system, all purchased items must meet the required standards and have appropriate certification.

In order to navigate in the prices of the installation of the gas tank in a private home, consider some examples of calculations for different size homes:

1. Housing, whose area does not exceed 150 m², is required gasholder volume of at least 2.7 m². At the same excavation work on its installation will cost about 20 thousand. rubles, and the purchase of equipment and its installation - from 170 to 220 thousand. rubles.
2. If it comes to building a larger area from 150 to 250 m, there is the volume of the gas container should be at least 4.85 m³. The cost of excavation will not be too different, but the cost and installation of gas equipment are more expensive: from 160 to 250 thousand. rubles.
3. For really big houses, heated area exceeds 250 m², require the installation of the gas tank and a larger capacity - 6.4 m³. There will be different and the cost of excavation (about 25 thousand. rubles), and the price for the purchase and installation of gas equipment - 245-305 thousand. rubles. In addition, the gas consumption for heating 200 m2 house and more will also be large enough.

As you can see, the purchase and installation of the tank and the auxiliary heating system at home - not too cheap procedure, but the result is definitely worth it. After all, in return you get the opportunity to heat your home, even without access to the central heating system or centralized gas pipeline, and taking advantage of the liquefied gas to the gasholder.

Gasometer for a country house: gas consumption for heating

To most accurately carry out planning, you need to make a preliminary gas flow calculations, which will be consumed for heating the house. Calculate it possible, taking into account several fundamental factors that determine the flow rate:

• type of equipment used for heating and serves as a gas consumer;
• the presence or absence of hot water in the building;
• particular climatic conditions in which you live;
• Thermal insulation characteristics of the building;
• the number of people who live in the house.

Taking into account all these factors, it is possible to make calculations according to the following algorithm: the number of square meters of the house is divided by 10. The resulting figure will show how much power the heating equipment is necessary to ensure a comfortable room temperature.

Then the result is divided by two and multiplied by 30 (average number of days per month) and 24 (hours to days). The result will be equal to the amount of energy required in kWh / h. If we consider that one liter of gas provides 11.2 kW / h, then the number that you received, you must divide by 11.2 to get the approximate fuel consumption for your home.

Filling the gas tank: the price and as it happens

Many of those who are planning the purchase and installation autonomous heating system of this type to be interested in how to fill the gas tank. Gas supply to the gas tank is made using a special machine that pre-ordered. Connection is made with a special sleeve to valves for filling gas. Thus the sleeve length can be several tens of meters in case it is impossible to drive the machine close.

After the required amount of gas will be pumped into the tank, you sign the necessary documents and pay for the procedure. As for the price filling the gas tank, there is the role played by several factors:

• tariff for the provision of gas, set the company where you are applying. It should be borne in mind that the price of different companies can vary significantly;

• transport services - payment for the distance you need to travel to your home machine. The further gas carriers will have to go, the higher will be the cost;
• the price of liquefied natural gas for gas tanks, which can also vary.

The cost is calculated based on the amount of gas that has to be filled into the container, plus individual shipping costs. The average price of gas is 15.5 rubles. / L, shipping costs are calculated based on the distance from the place of residence of the buyer of the company, to which he refers.

gas tank refueling procedure is not too much trouble, if you think in advance how the car will drive up. Suffice it to find the right company that specializes in this, and find out how much it costs to fill the gas tank.

Useful advice!If you want to save, you are advised to consider as much as possible about available offers refueling gas gasholder. So you can choose the most suitable option the price of gas for the gas-holder and transport tariff.

Gas tanks for private homes: reviews of the owners

Make sure that all the expenses are justified, reviews will help owners of gas tanks. Also, since you will be able to learn about the features of this system, and perhaps some of the difficulties to be faced.

"Due to the fact that we bought the land in a place away from the city, the issue of heating the house appeared almost immediately. stove heating rejected the idea, as it is quite troublesome, and then began to read on the Internet about the possibility of the tank installation. Of course, I can not say that such heating does penny goes. All the same, every time it is necessary buy liquefied natural gas to the gasholder, But then no problems with it. In any cold in our house warm. "

Alexander Surzhikov, city Belgorod region.

"It's good to have a cottage in the country, especially if it has all the amenities. But when we bought the house, there to sink could only ordinary wood. This, of course, is cheaper, but it is quite difficult and uncomfortable. Steel watch, which has a gas tanks for the country house priceswatch and read reviews. When installed capacity currently, it became much better. Just the same chip on my shoulder. Volume taken more specifically, that the car did not have too much to drive. Now we refueled again, and quietly drown himself. The cool thing. "

Oleg Ax, city Voronezh region.

Related article:

Installation of heating systems of private houses with their own hands: the scheme

Different mounting methods. Advantages and disadvantages of different types of heating, suitable for private homes.

"At one time we are faced with a dilemma: gas or electric heating. In our village has electricity, but that's just it is. A little thought and decided that depend entirely on the central electricity supply is not very good. Imagine, with the first well malfunctions we remain not only without light, but no heat. Better separately to buy gas for the gas-holderand not to worry. Many say that it turns out quite expensive, but we think it's worth it, especially since it is always possible and buy the tank and gas supply system at a reasonable price. "

Artem Mikita, Mr. Moskvskaya region.

"And I was most strained regularly need to book a car and generally mess around with it. But after reading reviews about other ways to self-heating, I realized that there was still worse. Over time used to it. Before as buy gas tank to the country, the priceand conditions negotiated with the nearest company that is engaged. In daily use the issue still very convenient. "

Arthur Nikanovich, city Yaroslavl

What you should know before you buy gas tank: characteristics and selection criteria

To not make the wrong choice and to buy a model that will fit all the parameters, consider the basic criteria by which you must make a choice.

Strength. Due to the fact that gas which is inside the gas holder, forms the evaporation pressure inside the container is always increased. To tank wall could withstand such pressure, their thickness should be in the range 6-12 mm. As a material used for manufacturing a solid structural steel.
All welds must undergo additional processing capacity to avoid discrepancies in the joints line. And in the case of tanks at very low temperatures (below -40 ° C), and still make additional strengthening by internal baffles.

The second important aspect - corrosion resistance capacity. Given the fact that the gas tank is located under the ground for years, even decades, it has to be the most resistant to any external factors. In order to not yield steel corrosion, it is coated with a special compound, e.g., polyurethane, bitumen or epoxy.

Which option is best to choose? Asphalt coating is cheaper than the others, however, and it is relatively short. Epoxy provides reliable long-term protection, but while maintaining its integrity. And given the fact that it is quite brittle and chipped off from even the slightest shock, it can be difficult. It is considered the most reliable polyurethane coating, as it is very resistant to mechanical stress.

Another important measure to prevent corrosion processes - electrochemical protection. Such devices may be "active" and "passive." In the first case the cathodic protection station and in the second - the anode-cathode systems. Both are designed to compensate for the deficiencies and damage, and to increase the service life of the gas tank.

It is worth paying attention to As a stop-safety valvesAs well as filling the tank elements, as this factor largely determines the reliability of the gas tank. Your job is to make sure that all the elements of a strong, not damaged, resistant to corrosion and low temperatures. The importance of this parameter is difficult to underestimate, since it becomes crucial when it comes to gas leakage.

What is best to choose a gas holder: reviews and expert advice

Experts advise to take into account the fact that the gas tanks are different, so you should pay attention to it, which option is preferable for use in a particular case. Initially, there are both ground and underground gas tanks. However, the first type is used in our country is extremely rare, it is easy to explain the rather severe climatic conditions. Although it is worth noting the fact that the installation of such a container requires a complicated and painstaking preparation of the site.

Oddly enough, but the installation of underground gasholder easier to implement due to the fact that being on the depth, capacity is always in a positive temperature. This arrangement minimizes the expenditure for heating gas and prevent its evaporation.

If the choice between vertical and horizontal gas holder, the first is to assume that the main difference between them is the mirror evaporation. That is, they differ in surface area, which is vaporized liquid fractions, which affects the gas pressure. The higher it is in the container, the better will be provided with all gas consuming appliances.

Given the fact that winter in our country is quite cold, horizontal gas tanks are more popular. If you need to heat a large area, then this option will be better. The use of vertical gas tanks is justified only in cases where the flow rate of gas is planned to be quite small. For example, they are used for small houses, summer kitchens, etc.

According to experts, another important advantage of the horizontal gas tanks in front of the vertical - the ability to better warm heat of the earth. That is, for normal operation of the horizontal containers extra heating is not required, in contrast to vertical. This contributes to substantial energy savings.

You need to pay attention and on the tank neck. Its structure should be that where the tank is installed. is to choose the container with a neck taller Cold (50 cm), as the pit is deep enough. If the neck is low, you can not bury deep enough gasholder, which again would entail additional costs for heating and installation of the evaporator.

filler cap must be fitted with special hatch which enables the operator to conduct inspection and timely tank empty it of accumulated condensate and paraffins. Although such works are carried out not too often (about once every ten years), it provides security and is a very important point that should not overlook.

Useful advice!If not provided in your model special gasholder Luke for inspection, making it all the same necessary. In this case, the reservoir being excavated and inspected for signs of damage from the outside.

Another important detail - the supporting legs of the tank. They are necessary in order to prevent deformation of the bottom and reduce mechanical stress, which is constantly exposed to the container.

How to fill the gas tank: liquefied gas prices

How often you will have to fill the gas tank, directly depends on the volume of the tank, as well as on the speed with which you will spend the available gas volume. If the preliminary calculations will be done properly and the capacity is too small, it will have to book the car quite often. In addition, you may have to face the lack of pressure in the tank, it will hinder the flow of gas.

There are two more comfortable filling the gas tank scheme for private use:

• dressing twice a year. Using this model, the car bought in autumn and winter. Typically, the bit order different gas which differs ratio of propane and butane. And while gas for use in the cold season, is more expensive, it brings great any frost and has a high heat capacity. This gas can be used in summer and winter, while the "old" is not designed for winter;

• refueling once a year. If the tank volume is quite large, dressing can be carried out once a year. Do it better in the warmer months, as the price for gas in this period below. The main thing to buy a mix that is equally suited for winter and for summer.

It is important to understand that all the payments made by fairly conventional you and determine exactly how much gas is consumed in a given year, it is impossible. As accurately as possible to do this can only be a specialist, so maybe it makes sense to spend a little more money on During the planning phase, to avoid future errors, additional costs and hassle of unplanned machine challenge.

Useful advice!If your area is located a few houses, it is possible to use one common gas tank of a large volume to supply gas to all the buildings.

When choosing a tank volume should pre-calculate how many liters of fuel will need to buy. Price gas gasholder ranges 15-16 rubles per 1 liter, so that the available volume must be multiplied by the current value, as a result you will be able to present consumption of about purchase. However, take into account the fact that the cost of LPG gas tank for each year varies, and hence calculate the long-term outlook is impossible.

Mobile gas tanks, despite the absence of the need to excavate and perform complex installation procedure - not too fit for our winters. Mobile gas tank on a trailer, which price is more than 230 thousand. rubles will be able to accommodate a very small amount of fuel, sufficient only for temporary heating a very small country house. And because the price of a liter of gas will not be different for the gas tank of this type, you can except to avoid unnecessary trouble with the installation.

Gas tanks for the house: the Russian and foreign markets

Having defined the parameters and requirements that you are bringing to the gas tanks can go directly to the study of products on the market. To this end, we will look at what offers domestic production differ from overseas, and which option is preferable, and pay special attention to some of the most popular companies that offer their products at market today.

Gasholders between domestic and foreign production, there are significant differences, primarily dictated by the established standards. Also differ in the installation and maintenance procedures. Consider all the details of both options.

Russian-made gas tanks have thicker walls than those produced in Europe. However, protection against corrosive processes domestic reservoirs often leaves much to be desired, and requires an additional cathodic protection. Import models for full protection often enough and passive protectors.

Is significantly different design of filling systems of domestic and imported gas tanks. So, in order to carry out trouble-free and safe filling of the tank, produced abroad, we need to have a special LNG, which has proper equipment. If you do not take into account this factor and use it for filling normal car, significantly increases the risk of occurrence of reservoir damage and gas leaks.

Not every gas tank, manufactured in Europe, able to cope with its functions under the conditions of low temperatures, which are typical for our winter. Each product must be tested previously and obtain the relevant certificate of conformity and authorization to operate in the territory of Russia. This absolutely can not be neglected, as it is primarily a question of your safety.

Differences of imported and domestic gas tanks and the impact on their value. If the Russian product initially available for purchase at a lower price, then in the future you will have to spend money on its maintenance. With imported tanks opposite situation is the same - higher initial cost is almost completely eliminates the need to spend money on maintenance.

Of course, much depends on the manufacturer, but not all. Much of the responsibility lies with you, because it is you have to take care of the gentle transportation and proper installation. After all, even the most high-quality container, non-compliance with the installation requirements, may be damaged, which will soon become the cause of its malfunction.

You should also make sure that professionals choose the most suitable electrochemical protection and use the recommended equipment for charging. To do this, you must apply only proven companies that have a good reputation and sufficient experience in this field.

Gas tanks for private homes: prices, reviews popular manufacturers

Great choice is often the buyers do not benefit as entangled in the characteristics and offers just enough and the chance to buy something that does not increase significantly. Consider a few manufacturers, reservoirs which are very popular and are often purchased for use in private homes.

Gas tanks under the key: the prices and features of products Deltagaz (Czech Republic)

Czech company Deltagaz fairly well known on the European and Russian market. This is due to the fact that its products meet the standards and are excellent for use in our country. The company offers several models designed for horizontal installation. Between themselves, they differ only in volume - 2700, 4800, 6400 l, etc. For all embodiments are set the same temperature limits: 20 to 40 ° C.

Among the arguments in favor of this choice are the following:

• 8mm solid wall with an epoxy anticorrosive coating;
• Warranty service life - 20 years, although, in practice, with proper treatment tank completely retains its characteristics for over 50 years;
• throat height is 75 cm, which allows you to pour in the tank deep enough. This is an advantage when you consider the depth of soil freezing in winter.

Since the tanks are manufactured in Europe, the value of them in Russia is not too low. The price of the gas tank for a private house turnkey Deltagaz 2700 will be about 170 thousand. rubles.

Gas tanks manufactured by VPS

Reservoirs of this firm are somewhat different from the previous version and have several advantages. For example, temperature limits within which the operation is permitted containers noticeably wider from -40 to 40 ° C. In addition, its products manufacturer provides a warranty of 30 years.

All models have a horizontal arrangement and made of sheet steel onto which is applied a layer of epoxy anticorrosive protection. On sale you can find models in volume in 2700, 4850, 6400, 9150 and 9950 liters. However, despite these advantages, the price of the installation of the gas tank is almost the same as for Deltagaz models.

Gas tanks under Chemet key

Polish tanks Chemet widely known thanks durable polymer coating, which is used during the manufacturing process. There are also several additional technical features that raise the price, but at the same time extend the the service life of tanks: Use only stainless steel and has a robust ribs inside containers.

For use in conditions of the Russian climate are three models of different volumes: Chemet 5, Chemet Chemet 6 and 9, capacity of which 4850, 6400 and 9200 liters respectively. In this case, all three models are designed for horizontal installation. The cost of gas holders of the company starts from 330 thousand. rubles, excluding installation and connection system.

Gas tanks for private house turnkey manufacturer of Fas

Russian-German venture Faskhimmash also offers buyers a pretty high-quality products that are fully capable to compete with European tanks. Installing gasholder turnkey private home is possible due to the presence of five models: Fas 4.6, Fas 6.5, Fas 8.5, Fas 9.2 and Fas 20. These figures are not only the name of the model, but also point to the tank volume in thousands of liters.

To protect the body manufacturer uses a two-component polymeric material, which allows to extend trouble-free service life of the tank up to 30 years. In this model Fas 4.6 gasholder price setting in a private house with a full range of services will be about 200 thousand. rubles.

Gasometer for a country house: reviews, prices for City-Gas tanks

This Bulgarian manufacturer offers Russian customers are four models to choose from volume 2700, 4850, 6400 and 9150 liters. In this embodiment all of working temperature - from 40 to 40 degrees. And provided the warranty period is 20 years.

To protect against corrosion is applied two-stage procedure: first reservoir coated with polyurethane paint, and thereafter coated with epoxy. All models are designed for horizontal installation underground.

If you read reviews of the owners, gas tanks for a country house by this company are of high quality and fully justify its relatively high price, which even for the minimum size of the container is about 330 thousand. rubles.

As you can see, there are several factors that need to be taken into consideration before you buy a gas tank with the installation: the price, the expected operating conditions, the required volume of tanks, etc. In addition, when planning the budget should take into account the cost of gas for the gas tank, because now it will be your constant article expenses. However, as confirmed by the owners of these vessels, the cost of filling the gas tank is justified by the fact that your home will always be warm and comfortable.