How to upgrade to the wiring in the room - Internet socket set with his own hands

Today, in the age of high technology, almost can not do without an Internet connection. Along with the television or electricity, cable internet communication has become mandatory in every home. To connect your computer to the Internet required a cord that can just get in the way, even if it is carefully nailed to the wall.

When repairing it will be better to establish an Internet outlet, which will not disturb the aesthetic integrity of the interior space and save the inconvenience of wires. Step by step how to install their own hands - on.

What is included in the training

Proper installation of cable internet hidden way - the most durable and accurate. Even at the stage of communications planning in the room, the walls doing Stroebe for laying electrical wiring, telephone, television and Internet cables. Wires are laid in Stroebe, and output to Enclosures for further connection. Internet sockets are installed on the same level as the conventional electric - from 15 to 30 cm from the floor.

Sockets set already at the final stage of repair, when done all the way up to the decorative finish.

Installation and connection sockets - step by step guide

The process is substantially similar fastening socket installation or a power supply switch.

Step 1. With the outlet cover plate and take out take out the connection node. We set the frame on the Escutcheon, baits screws. Notches in the design allow you to adjust its horizontal. Expose the frame according to the state, tighten fasteners.

Step 2. Bites derived in podrozetnik cable. Its length should be approximately 15-20 cm.

Step 3. Remove the top layer of insulation from the wire, exposing the twisted pair 2-3 cm. Cut away breaking the thread running between the cores. Unravel strands individually.

Step 4. Pulls core outlet opening contacts and labeling study. Internet sockets are connected in two ways - A and B. The latter is more common.

Step 5. If you are connecting a power outlet for the first time and do not know which wires which wind up, pay attention to the core body. It always contains the circuit.

Step 6. Missing cable through the cover, insert the wires by color in the slots of contacts.

Step 7. Snap-on lid and cut off the excess lengths lived. The advantage of online outlets is that when connecting the wires need not be removed from the veins protective insulation knives are installed in the structure itself. Thus, when the lid is closed, the wires are stripped themselves.

Next, insert the caliper Escutcheon, fasten the facade panel and a decorative and protective frame, if desired.

common errors

To full construction assembly, please check on the performance of the socket. If the connection is not there, it means that an error was made when connecting.

Common mistakes:

1. Damage to the sheath lived twisted pair. If you connect the twisted pair cable sheath has been damaged to the outlet core conductors, fix the problem, you can correct reconnection of cable cores, without pre-stripping wires.
2. Wrong way to connect. If the type of modem has not been tested, or router and connectors, communication can not be. If the AC outlet of the type "B", and the cable with the connector on the "A" type of signal is weak and distorted, or at all will be absent. Before connecting the outlet should pay attention to the connector and fix the situation on the ground will only dismantling the socket and reconnect the cable.
3. Too long wire. If hanging socket, then it was left long section of cable. To resolve this problem, you must make a complete dismantling of the structure, cut the cable, leaving a fragment of the desired length and re-assemble the socket.

If the installation of sockets all errors and all rules have been considered, but the signal still does not appear, it was purchased defective device. When buying a wall outlet is better to pay attention to the products of proven brands and check the goods on the spot.

If you are not sure that will cope with Internet connection sockets alone, it is better to attract specialist care, because too short cut cable will be difficult to increase, and at the wrong cable is connected you can decrease the speed and quality of transmission data.