Which mattress is better: spring or springless as vyborat

For the full relaxation and comfort is the main condition for high-quality furniture for sleeping, for which you must choose the right sleeping surface. Products in a wide range and are characterized by filling, rigidity, anatomical and orthopedic properties. Which mattress is better: springless or spring? Be able to answer the question after studying the distinctive features of each type of product.

The spring block Bonnell: what it is

To understand the question, what is better mattress: spring or springless - should study the structure and characteristics of the products. The ground product is spring metal frame consisting of springs. There are two types of mattresses that differ from each other embodiments of a compound of helices, their shape, size and by fixing them to the frame, and therefore, they are divided on the mattress with dependent and independent springs. The first embodiment is represented by products with Bonnel spring block, and the second - with Pocket Spring system.

Mattress with Bonnel springs was invented more than a century ago. It consists of coils interconnected. The springs are made of wire with diameter 1.2-2.5 mm, made of stainless steel. Each element consists of 4-5 turns with a diameter of 10 cm.

To create a bonding technology used coils bikonusnyh springs, wherein the coil radius is increased and decreased periodically. There is used one of two options - chetyrehvitkovoe pyativitkovoe or weaving. In the latter case, slightly above the spring unit, whereby the product cost is expensive.

Springs narrowed in the central part and extended along the edges, so that their appearance resembles an hourglass. This design allows you to evenly distribute the load of the human body, while retaining its correct position. To connect spirals interconnected using high carbon steel wires with knots or special metal frame. To prevent unauthorized unwinding of the springs on the first and last turns performed fastening to the unit, consisting of upper and lower frame.

Important! At the end turns of the spirals made special locks, which increase the strength of the unit.

Bonnel springs are intertwined in a specific sequence, so that they are not touching each another that eliminates the possibility of friction and the occurrence of the characteristic rattle during operation products. The number of springs in Q1. m can reach 100-150 pcs., depending on the model and manufacturer of the product.

Advantages and disadvantages of spring mattresses on the Bonnel system bed

As proven by numerous reviews, Bonnell spring unit is very popular among consumers who celebrate the good performance of the mattress and its available cost.

Bonnell spring unit is characterized by high reliability and durability, averaging 15-20 years. This is achieved by a special method of twisting turns of the springs and connections between them. The result is a rigid frame, which spirals do not move to the side.

When exposed to large spiral mattress loads do not contact each other and are pressed to the ground. This elasticity allows to avoid friction and squeaking. Springs can withstand the weight of a person is equal to 120 kg and above.

Sleeping surface with the system dependent springs is recommended to get the child. There is a special children's line of spring mattresses, which, having quite moderate hardness, able to provide adequate support to the child's spine, at the same time without causing discomfort and back muscles thighs.

Because Bonnel structure is hollow, properly ventilated. Good air permeability reduces the possibility of corrosion of the metal, the nucleation bacteria and insects, which improves hygiene products.

At spring base stacked layers of fillers in the form of felt, polyurethane, wool, coconut fiber, syntepon, batting, spunbond and other materials with which provided additional comfort is softened and simultaneously the feeling spring stiffness is governed design.

Important! Bonnel unit is used mainly in the manufacture of sofas spring mattress.

The disadvantages of the products with Bonnel spring system can be attributed primarily imperfect orthopedic properties. During operation, the spring mattress, which constantly load bearing compressed, creating a hammock effect. This deformation of the sleeping surface is particularly noticeable on the double products. Discomfort on availability depression feels and the other partner, which is located on an inclined surface, whereby the compressed muscle reflex.

Useful advice!In order to avoid the effect of the hammock mattress it is recommended to periodically turn.

Sometimes the condition when the spring unit perceives constant heavy loads, some springs may break or uncoil, resulting in damage to the filler and cover. On this mattress to sleep is impossible.

unpleasant creaking, which is the result of loosening of the spring attachment may take a few years of operation. To prevent this effect, many manufacturers increase the spring unit layers of dense foam. This technique allows to increase the permissible load on the mattress up to 180 kg, and prolongs the life of the product.

Characteristics of the mattress with independent spring block

independent spring system unit represented Pocket Spring. Each barrel-shaped or cylindrical helix is ​​made of hardened high carbon steel with a diameter of 1.5-2 mm. The number of turns in the spring is 8 pcs., Their diameter is 2-6 cm. Per 1 square. of m ranges from 250 to 1000 pieces. The best option is considered to be 350 pieces. for 1 m² surface.

Each spring is placed into a separate cover, made of a nonwoven material or a spunbond fayberteksa. The springs do not interact. To create a coherent structure are interconnected covers themselves. Binding the springs should be as concentric, allowing each element to show its elastic capacity, thereby achieving the maximum anatomical effect.

Considering what spring is best, you should pay attention to the fact that the Pocket Spring system contributes creating orthopedic maximum effect, where each part of the human body is supported in the desired degree. Mattress repeats total body configuration ensuring its correct position and good blood circulation.

Important!To create a regular geometric shape and get the required amount of product, the design on both sides is complemented by a layer of spunbond.

Classification of mattresses with independent springs

Blocks with independent springs are of different types, which is reflected in the final cost of the product.

The simplest and most common embodiment is a block Pocket Spring S500. It consists of a spring with a diameter of 5-6 cm, the number of which per 1 sq. m is 220-300 pc. Such mattress involves the maximum load on one berth to 120 kg.

A more advanced embodiment is a block Multipocket, which is much higher density of springs. This contributes to an improved anatomical functionality. The structure includes a spring structure with a diameter of 4 cm. Per 1 square. m can be positioned up to 500 pieces. Mattress provides a maximum load of up to 135 kg.

Pillowtop to the mattress Micropocket unit equipped with miniature springs diameter 2-2.5 cm, which allow to reach the maximum design density. Per 1 square. m is up to 1200 spirals. Such a block can withstand a load up to 150 kg. Due to the point elasticity mattress perfectly follows the contours of the body.

One of the latest achievements in the field of orthopedic products for sleep is the mattress with independent springs House Glass. Springs formed in an hourglass shape. Such elements are characterized simultaneously by three degrees of hardness, which makes it possible to implement them in a double model, designed for partners with a significant difference of weight categories.

Another good option for couples with a large difference in weight are Dual Spring mattresses. A distinctive feature of products is that in one cover arranged immediately two springs - one in the other. Characterized spiral larger diameter lower rigidity, and the second - high.

Important! In case of damage of one or more springs, the manufacturer may implement repair spring mattress.

Reinforced spring mattresses Pocket Spring made of a thick wire with a diameter of 3-4 mm. Models can withstand the weight of 160 kg. There are variants with different hardness zones, which makes it possible to provide a more precise body support large build.

Pros and cons of mattresses with independent spring block

Mattress with independent spring block has a number of distinct advantages. Due to the fact that each spring is housed in a separate pouch, the product is characterized by improved anatomical properties. There is no effect of the hammock.

Important! The more springs in Q1. m, the greater the ability of the mattress to adjust to the anatomical curves of the human body.

Mattress with a block of independent springs is characterized by durability, which exceeds 20 years. Products are safe. The presence of strong cover for each spring element eliminates the possibility of breakage, a sharp edge which can break the filler and the wound cover and the sleeping person.

Another undoubted advantage of spring independent units is their ability to withstand heavy loads, which is not the mattresses without springs. They did not subside for a person with weight up to 100 kg. There are models designed for a load of 200 kg.

Related article:

Size mattress for the bed: how to avoid mistakes when selecting a product

Dimensions of standard and custom products. Selection width, length and height of the mattress, depending on age, height and build human.

Products are characterized by a low level of motion transmission, which is especially valuable for double product. When one partner is inverted, the other will not feel the effect of vibrations. Due to the wide variety of species products becomes possible to select an option for the couple having a large difference in weight.

During operation, there is no unpleasant squeaking, since each spring is isolated from its neighbors, which eliminates the risk of friction.

However, mattresses with independent spring block are not without drawbacks. First of all it should be noted the high cost of goods. These types of mattresses are not recommended for young children to acquire. This is due to the fact that the product is characterized by the ability to take high loads, so it will be too hard for a child.

Pros and cons of springless mattresses

Springless mattresses are deprived of a metal frame. They are made of different kinds of fillers. The necessary stiffness and elasticity properties are provided orthopedic due certain combination between the layers. As evidenced by the numerous reviews, springless mattresses are more comfortable than their spring counterparts.

These products are characterized by strength and safety. As fillers used hypoallergenic materials that do not cause skin irritation. Mattress devoid of metallic elements that can break during use. Also, this design eliminates the risk of friction or characteristic squeak. The service life of the soft springless mattress is not more than 10 years. Rigid product may last for about 15 years.

Mattress is lightweight, making it easy to transport. Springless product does not require special care, ventilation and removal of dust from its cavities. Suffice it once a year to carry out preventive cleaning.

From articles shortcomings can be identified by restriction weight. Best quality hard springless mattress will not sustain the load of more than 120 kg without loss of orthopedic properties. High-quality products are characterized by high cost, which can exceed the price of mattresses with independent springs. According to the technology individual layers of different materials bonded together by an adhesive composition which has an unpleasant odor. However, it will disappear in a few days after the product out of the box.

Suitable carriers for such mattresses use latex, foam, coconut coir, bamboo, struttofayber, sea grass, horsehair. The articles may be soft, medium hard and rigid, and that determined by the form of successive layers of material.

Natural fillers for springless mattresses

The most popular products of latex and coconut coir. Latex is made from the sap of the Brazilian rubber tree. Its structure resembles a cell which are formed by foaming and curing the material. The cells have a different diameter, whereby the material is characterized by varying degrees of stiffness transmitted springless mattress. Latex has air pockets, thus ensuring a good air circulation.

Mattress made of this material has the ability to store and release heat during the winter time, and it does not heat in summer.

Important! Latex - enough soft material, therefore it is used in combination with coconut fiber.

For medium stringency latex mattress is top layer consisting of coconut fiber, and to increase the rigidity of the product latex is placed under this layer. You can select the combined option, which is often used for children's springless mattresses, where the product has a two-way orientation with different levels of stiffness.

Mattresses of coconut fiber are preferably used for newborns, who have not yet formed posture. Products are characterized by the required level of stiffness, moisture resistance, and good air permeability.

Gaining popularity rigid non-sprung mattresses, horsehair, which are recommended for people with spine problems: osteochondrosis, rheumatism. There are models with a cotton filling. If short fibers are used, the mattress is thick, heavy and short-lived. The long fibers provide the ease and durability of the product.

Artificial fillers springless mattresses

As synthetic fillers for use polyurethane foam mattress, tehnogel, struttofayber, and hollofayber memoriform. Furniture foam is considered non-toxic material having a porous honeycomb structure. This is the cheapest version of the filler.

Memoriform is a kind of expanded polypropylene. Material capable of storing contours of the human body. It is elastic, hypoallergenic, abrasion resistant, durable, has a therapeutic orthopedic qualities. The disadvantages are the high cost of the product. The price of such springless mattress 200x200 cm reaches 35 thousand. rub.

Hollofaybera typical of the average stiffness. Due to the spiral fiber provides good elasticity and orthopedic effect of the mattress. A material capable of retaining heat. This mattress is an affordable cost.

Struttofayber has a fibrous structure characterized by a vertical arrangement of the fibers. He is characterized by durability, breathability and durability. The main drawback is the lack of the possibility of bending of the mattress. Tehnogel an innovative material, which is able to replicate completely contours of the human body, thereby achieving maximum orthopedic effect. However, these mattresses have a rather high cost.

Which is better: a spring or springless mattress, Comparative characteristics

In order to determine, which mattress to choose: Spring and springless, - to analyze and compare some of the products performance.

The first criterion is the probability of falling into the indoor unit and the accumulation of dust in it. Springless mattresses are deprived of large voids and micropores are not communicating cells. This design feature eliminates the ingress of dust. The indoor unit is protected by the heat management products, hypoallergenic layer, which acts as a dust filter, retaining dust, which fell under the cover. It can be easily removed with a vacuum cleaner.

Mattress spring unit is characterized by a large number of voids creating a pump effect. After 2-3 years, the inner frame will remind filled with dust bag for a vacuum cleaner.

When choosing a spring or polyurethane foam mattress can not ignore the possibility of presence of static electricity. Springless mattress is elektrobiologichnym product. It does not contain metallic elements, which eliminates the possibility of the formation of static electricity.

Useful advice!To exclude the accumulation of static electricity for springless models should be selected case of a natural material.

Presence in the spring mattresses metal products leads to the formation of static electricity, which is detrimental to human health. This can lead to irritability, occurrence of depression, fatigue and disturbed sleep.

Which mattress is better: springless or spring, important points

Thinking it best: foam or box spring - not to mention the possibility of the presence of moisture inside the mattress. The human body is designed so that during sleep allocates 50-200 g of moisture. It accumulates in the bedding and mattress cover. Some of it may get inside the product. Cases springless mattresses can evaporate 50-90% moisture. Such products are used as filler materials with the high level of breathability, which contributes to the rapid removal of moisture from the indoor unit.

Cases spring mattress capable of preventing penetration of 10-50% moisture. The remaining part is inside, which may lead to erosion of the metal block, preferably made of a black metal on which no corrosion resistant coating. This leads to the formation of unfavorable climate. Damaged spring will produce a popping noise.

Springless mattresses are unable to transmit the oscillatory motion. body position change occurs locally. It also relates to a mattress with a block of independent springs. Products with dependent metal elements would react to changes in body position, the vibrations are felt throughout the sleeping surface.

In deciding, which mattress is best to choose: Springless or spring - should pay attention to the orthopedic properties of each type of product. The first embodiment and the block mattresses with independent springs characterized by good qualities. These products provide uniform load distribution, create an anatomical support to every part of the human body.

Mattress with block dependent characteristic springs orthopedic minimum quality. This is due to the fact that all the springs are interconnected. When exposed to one of them triggered all nearby, which does not adequately provide anatomical support body.

Springless mattress structure is the same for all product areas. There are no restrictions on the use of the mattress edge. In spring models metal block is reinforced with polyurethane on the perimeter. Such a framework can be soft or tough enough, so the edge of the mattress uncomfortable for sleeping.

Rating mattresses with independent springs famous brands

Popular spring is moderately soft mattress model Ormatek Hybrid. The composition of the product includes a spring assembly S1000, in which q is 1. 500 m is arranged springs. The product has different filling part that allows to change the level of hardness, elasticity and flexibility sleeping surface of the mattress by turning.

On one side is a combination of layers of memoriforma and natural latex. Memoriform under the influence of a person's weight is stored individually outline of his body and restores the shape of a few seconds after the load is removed. To compensate for the inconvenience and increase the elasticity of the surface is covered with natural latex memoriform.

On the other side of the article is laid a layer of expanded polystyrene, which provides a more rigid sleeping surface which has a therapeutic effect on the muscles of the sleeping person. The mattress has a removable knitted cover. The product is designed for loads up to 140 kg. The cost of such a spring mattress 160x200 cm is 30 thousand. rub.

Among the spring mattress of medium hardness can be identified model Matramax Flores. The product consists of a metal frame unit with independent springs, whose number per 1 sq. m is 625 pieces. On both sides of the stacked layers of coconut coir, framed around the perimeter of the entire sleeping area of ​​the product durable and elastic penopolipropilenom. Mattress cover is made of a mixed fabric consisting of cotton and polyester. Product height is 18 cm. Buy spring mattress 160x200 cm can be for 18 thousand. rub.

High demand versatile hard mattress Ormatek Variant. Orthopedic base is represented by an independent spring block, in which q is 1. m is 500 springs. To change the elasticity and stiffness of the product, simply flip the mattress.

One of its sides is very tough, providing a layer of coconut fiber thickness of 3 cm. On the other side is a combination of fillers in the form of coconut coir and natural rubber latex, whereby the sleeping surface is obtained moderately stiff. Mattress height is 26 cm. It is able to withstand the weight of 140 kg. Price double 160x200 cm size of the model is 25 thousand. rub. You can also order the product non-standard sizes. For example, a spring mattress of 200x200 cm would cost 32 thousand. rub.

Popular models of mattresses on the Bonnel spring block

Among mattresses Bonnel moderate rigidity popular model uses Ormatek Larda. Block independent springs, where q is 1. m accounts for 108 elements, creates the necessary degree of flexibility. Over springs spunbond layer is placed, which contains the polypropylene nonwoven material exhibiting abrasion resistance and high loads.

Sleeping surface Coarse laid in case that quilted hypoallergenic material. The mattress is intended for a load up to 105 kg. The cost of a single product is an average of 7 thousand. rub.

Good properties has anatomical mattress Promtex-Orient Rest standard. The base product is represented by block from the dependent small diameter springs, which are stacked on top of coconut coir fibers and polyurethane foam, which gives the desired stiffness of the mattress. This model is implemented in a case of jacquard. The product is designed for loads up to 90 kg. Buy a mattress can be over 8.5 thousand. rub.

If you want to buy the product, which must withstand loads up to 120 kg, it is recommended to stop the choice on the model Comfort Line Eco. The base product is represented Bonnel block 500 at which the springs are located on Q1. m. It is supplemented by a layer of elastic lateksirovannogo coconut fiber, under which is placed a layer of foam that extends the life of the product. Provides additional comfort cotton cover. Price spring mattress 140x200 cm is 15 thousand. rub.

Top springless mattresses: Ranking of popular models

The first position in the ranking of springless mattresses covers product Ormatek Flex Standart. The filler is used synthetic latex, which makes elastic mattress, moderately hard. Such a product can withstand a greater load. It provides anatomical support for all parts of the body. Mattress height is 15 cm. It is equipped with a dense cover of calico fabric. Buy the product can be over 13 thousand. rub.

A popular model is the mattress of medium hardness Ormatek Flex Zone Plus Big. It is made of polyurethane foam, which has 5 zones of rigidity, which ensures an anatomical and massage effect. As we know from feedback from polyurethane foam mattress does not deform under load and quickly restores the form. Notwithstanding the increased height equal to 23 cm, the product can be twisted, transported and stored as is without fear of structural integrity violation. The price of the mattress is 12 thousand. rub.

To couple with different weight category good decision is superrigidity mattress Dreamline Orto 15 which is made of coconut coir provided with several layers. This design contributes to the maintenance of the spine in the correct position. The multilayer article safely hidden in Jacquard case that does not attract dust, well cleaned from stains, prevents crumpling sheets. Buy springless mattress 160x200 cm can be for 17 thousand. rub.

Help to understand the question, what is better mattresses (springless or spring), real consumer reviews, which give an objective assessment of the product. Each type of mattress is characterized by distinctive features that need to be taken into account when selecting a product. The main criteria are the necessary stiffness, elasticity, availability of orthopedic and anatomical characteristics.