Paint type:
Water-based paint Enamel Silicone paint Extra Plastic paint Standard Plastic paint Safari Plastik Boya silicone paint Standard Acrylic Universal Latex, waterproof paint Izobay paint flexible, antifungal Elastomerik plastic paint "Sahra"room Length( m)
Widthrooms( m)
Wall height( m)
Area of windows( m2)
Door area( m2)
Number of windows
Number of doors
Paint type:
Water paint EmSilicone Paint Extra Plastics Paint Standard Plastic Paint Safari Plastik Boya Silicone Paint Standard Acrylic Paint Versatile Latex, Waterproof Paint Isobay Paint Elastic, Anti-Fungal Elastomer Plastic SahraRoom Length( m)
Room Width( m)
Online Paint Cost Calculatorwill allow to rationally determine the required amount of paint and varnish material. The rate of consumption depends on the type of surface to be coated, its magnitude, the abundance of layers deposited. Therefore, rough, porous and moist wood will require an increase in the application rate of the antiseptic. This also applies to rounded surfaces, achieving uniform color of which is possible if several layers of paint are applied.
Technical specifications provide an approximate calculation of the paint per 1 m2 with a single-layer coating by determining the surface area of the surface to be painted. The paint consumption calculator for 1m2 assumes the determination of the actual norm of the antiseptic for painting the ceiling, walls and facade.
To calculate the paint consumption on the walls using a calculator, you need to specify the following parameters:
- the height of the room from floor to ceiling;
- the length of the walls along the perimeter.
The paint consumption per 1m2 per ceiling is calculated by specifying the measurements in the calculator:
- the length of the ceiling;
- the width of the ceiling.
To calculate the required amount of paint for the facade, you should measure the height of the building from the foundation to the roof and the length of all its walls along the perimeter.
Calculation of the required rate of water-based paint
The water-based paint and varnish coating is used as a finish for interior and facade surfaces. Thanks to technological additives, water emulsion ideally falls on almost any surface except gloss. To determine the rate of its consumption, it should be guided by the calculation of the manufacturer, which recommends the necessary amount of material per 1 square.m. As a rule, its average value varies within: 1 liter of paint per 8-10 sq.m. It is important to take into account that these parameters have an approximate value, because they depend on the number of layers deposited and the absorbency of the surface to be painted.
The calculator of the expense of a water-emulsion paint will help as much as possible precisely to define the necessary quantity of a painting agent. This will make it possible to rationally and economically decide on the purchase of material for painting. The calculation of the required volume of paint involves determining the length and width of the room, the height of the walls, the area of window and door openings, as well as an indication of the number of layers expected. Experts recommend to limit 2-3 layers, between application of which to observe the interval of 1.5-2 hours.
Calculation of the required norm of acrylic paint
As practice shows, the consumption of acrylic paint is 1 liter for 5-7 sq.m. The calculation rate specified by the manufacturer provides for painting on a previously prepared perfectly flat surface in a thin layer. Therefore, when carrying out an independent calculation, it is necessary to take into account the degree of surface roughness and the method of applying the paint. Use of the roller increases the consumption of the coloring agent by 10-15%.The acrylic paint consumption calculator will rationally calculate the required volume of material for walls or ceiling, allowing you to resort to significant financial savings and time.