We remove the mounting foam easily and neatly

How to remove the mounting foam from

tools Remove the tool from any tools in two ways: mechanical and chemical.

1. Mechanical. To do this, you just need to use your hands and any piercing-cutting tools. Naturally, at the time of removal of the foam, it must be dried, otherwise you will soak other tools. It is necessary to simply scrape using a knife, screwdriver, drill or any other device depending on the diameter and type of contamination of the tool. Most likely, there will be traces of substance and mechanical damage.
2. Chemical. Suitable even for the most difficult task - cleaning the "gun".The fact is that a chemical cleaner is used to remove the mounting aggregate. For still not frozen: Penosil, Foam Kliner or OPPA.If the foam is already dried: PENOSIL Premium Cured PU-Foam Remover. In order to use this tool, it is necessary to screw the cylinder onto the gun adapter and press the gun before the cleaner starts to stand out. Then wait for the substance to begin to dissolve, again pull the trigger. Make sure that the gun is clean, if the cleaner will be emitted without any remaining foam.

How to remove the mounting foam from windows and doors

Depending on the material of the door, the cleaner is selected. As for tools, often the same names of funds are used.

1. For doors and windows made of PVC.Suitable for final cleaning of surfaces from plastic, or minor dirt. Dissolve the assembly filler means: Cosmofen 5 and Winds systems Cliner about 5. These two products in the composition have a strong household chemicals, so they must be used very carefully, so as not to damage the plastic. This chemistry can dissolve it if you do not remove the liquid from the surface in time!

1. For solidified substances on surfaces. Also used are various cleaning fluids, which were previously called Penosil Foam Cleaner, Ultima Profeshenal and OPPA.In order to treat them with a surface, it is necessary first to cut out the protruding "sheep", and then to rub the remains of the substance with a sponge with a cleaning agent. It is enough to apply a little force and mechanical friction, as the hardened foam, having dissolved, will start to be removed.

Removal of foam from the floor

1. Dimexide. Sold in any pharmacy and is capable of wiping off some of the substance after you scrape it with a knife. Work with the product in gloves.

1. Cleaner. First, the frozen foam is removed with a spatula, and the residues using solvents Penosil Foam Cleiner and Ultima Profeshenal.
2. Strong cleaner. It has already been discussed earlier and is used to clean tools. This is Cosmofen 5 and Winds System Cliner pro 5.
3. Any liquid. It is checked in practice that, for example, with linoleum foam can be removed using only water. The principle of operation is simple: you cut everything you can, and put the damp cloth on the leftovers. After a while everything is removed without difficulty. Note that after you do this manipulation, there may be spots on the cover that are removed only when mashing. Coatings for varnish and gloss are not at all amenable to cleaning, but only replacement.

Dried foam on clothes

Cleaning foam from clothes is a very difficult task, because it is necessary to use complex solvents that can damage tissues.

1. Stain remover. Treat the stain with a cotton disc in the liquid and wait for the dissolution of the substance. You can also use gasoline. Be sure to wash things. But on the tissues still will probably remain spots.

1. Low temperature. The thing can be placed in the freezer, and after its freezing, cut off with a knife, dissolve the residues with acetone. You need to be careful not to spoil your clothes.
2. Thinner foam. If the aggregate is not frozen, you can apply those solvents that were named above. Remove the piece with a knife, and remove the residue with a solvent. For frozen foam, respectively, use the tools provided above. Also cut the foam, apply the product, wait 30 minutes and walk with a brush. Always wash the thing.

How to remove the mounting foam from the body

If the hands were dirty, the situation is not so deplorable and you do not need to use complex cleaners. There are two most effective means:

1. Mechanical friction. That is, you need to remove the foam by rubbing it with your hands. If everything does not go away at once, then after some time it will all go away.
2. Sponge, scrub and water. A great option, able to clear the foam from the body. In addition, you can use acetone, a solvent, a solution of salt. How to use: wipe with a sponge with a cleanser, or lower your hands into it for a while.

On the video, you can pay attention to how easily any amount of foam is removed with your hands and the effort.