Repair of metal entrance doors: how to fix yourself

Entrance doors to protect an apartment or private house from unwanted intrusion. Metal models are becoming increasingly popular, as they have a higher level of security each year. However, repair of metal entrance door - quite a difficult event. This is due to the complexity of their designs. Technique of repair work is determined by the nature of the failure.

Rules repair of entrance doors with their hands

Most faults that occur during the operation of the entrance doors can be removed without the aid of a specialist with his own hands. To do this, you need to read the rules of repair of metal structures that will eliminate errors during the event.

Repair of doors in an apartment or private house has a certain algorithm. Its characteristics are determined depending on the input material manufacturing groups. However, the removal of certain types of faults is common for all types of door panels.

No matter what material is made design, the first step is always the preliminary inspection. It is necessary to evaluate the existing problem and choosing the best way to fix the problem. At this stage the selection of tools to be used during the repair and the additional materials (if necessary).

Note! For repair of a metal door in the apartment or private home can not use the means at hand. If necessary, the complete replacement of this or that detail is recommended to select a new device such a way that it fully complies with the broken element in its technical characteristics.

If during the repair of the metal fabric used tools, operating from the mains, you need to check their serviceability. Any instrument malfunction may result in errors during the repair work. After the elimination of defects it is recommended to take all preventive measures to avoid repeated failure. For example, it is possible to mount a door closer, which facilitates smooth movement of the structure.

In the event of recourse to experts the cost of repairs may be different depending on the complexity. Price repair doors - the main factor that should be guided in choosing ways to fix the problem.

During the operation the surface of the door lining with (or without) wears. Ultimately, this can lead to the need for the restoration of the product. In this case, remove the leaf from its hinges and carry out all works in a horizontal position - this way is more convenient.

Repair of metal entrance doors: The most common failure

During operation, the input cloth on it affected by various unfavorable factors. They can be both physical and mechanical. There are the most vulnerable elements that are part of the door structure, which are often subject to wear and the various breakdowns:

• Castle;
• accessories (hinges, handles, eye);
• door frame;
• web surface;
• trims.

The most common failure to date - the failure of the locking mechanism lock the steel door. Repair of the device is possible, but to spend it alone is very difficult. Often require complete replacement of the castle, which is also not a simple exercise. For a man with no experience in this business, disassembly of the old unit and the new sidebar can be a daunting task.

Failure of hardware - a frequent problem. In this case, carry out independent repair is quite simple, but it is necessary to take into account the complexity of the problem. For example, to repair a door closer, which limits its opening, it is difficult. In most closers fail due to a curvature or in the case of oil leakage.

Helpful information!Problems with the door frame often arise due to incorrect installation. A very important point - the correct selection of fabric weights. Some boxes change their geometry because the door is too heavy.

A common problem is considered jamming the lock. The reason for this is the failure of the core mechanism - sekretki. Moreover, the door can jam at the worst possible moment, for example, when you are outside of the dwelling. The door leaf is exposed to wear and tear, resulting in the loss of its original form. The outer surface of the metal door more often sheathed with decorative facing materials or coated with paint formulations, which allow to increase its service life.

When using the door mechanical factors often have an impact on its decorative elements. Plat vulnerable to damage, most of all, so their replacement is a fairly common event. It should be noted that each fault primarily arises due to incorrect operation of the door structure.

What tools are used in the repair of metal doors

As already mentioned above, the tool is selected, depending on the reason for the failure has occurred. The complexity of the recovery of a structural element is considered when choosing the appropriate tools. Consider what tools are used during the removal of various problems in the input paintings.

When misalignment of the door frame is an indispensable tool for building level. Its application allows to adjust and fix the structure in position. Measuring tape is also used quite frequently for correcting geometrical faults of the input structures.

What other tools are used during the repair of the entrance door of the apartment and a private home? Of electronic equipment is most commonly used screwdriver. To lock the door frame and hinges need screws. Often there is a need to eliminate voids between the door frame and the opening. In this case, can not do without foam.

To fix some decorative elements of the skin, apply a special glue. For markup used an ordinary pencil. In addition, you may need hexagons and construction knife.

Helpful information!To eliminate the squeak should use a special lubricant for hinges or conventional motor oil.

All the above instruments are used for the repair of metal constructions input. In the event of a need to conduct the restoration of the iron door can be useful supplementary materials used as cladding.

Repair door lock: The most common causes of breakdowns

The reasons for failure of the castle, set in the front door, there is quite a lot. The possibility of failure is higher if device is of good quality. Improper use also increases the chance of breakage. Consider the most common causes that lead to malfunctions.

Not fixed tab. As a rule, the reason for this is the inadequate size of the response holes carved into the door frame. In some cases, the problems associated with the closing of the door may occur due to her straight. In the first case, for repair door lock bore himself tab. And also you can just shift the reciprocal opening so that it is aligned more precisely with respect to the lock tongue. The second problem is eliminated by adjusting the position of the door frame and the web.

With some difficulty opening the door. The most likely cause of this problem may be that during the operation there was a distortion of the castle. During the preliminary examination of the door it is recommended to pay attention to the evenness ludki. This problem is solved with the help of repair lock the front door of the apartment. The event involves the adjustment of the position of the locking device.

Another common malfunction seizing key is in the locking device. It is worth noting that often the same problem faced by owners of metal doors. In this case, there are two possible causes: getting into the garbage mechanism and displacement of individual elements of the device. In order to carry out the repairs of the castle entrance iron door, it is required to dismantle, take apart and fix it. Next, you need to lubricate any internal parts, assemble them and set back.

Jammed the lock. The main cause of such problems is able to larvae of the locking device. To repair the larvae of the front door is difficult to own. Therefore, as a rule, such a problem is solved by replacing the old with a new mechanism sekretki.

Helpful information! Before you begin to repair the castle, you need to determine its species and to pay attention to the photo, which will help to understand the structure of the mechanism. Most often the doors are equipped with cylinder safety devices. In second place are lever locks.

Repair of the iron door of the castle: How to replace the cylinder mechanism

If the core of the castle is out of order, you will need to make its replacement with their own hands. Before you buy a new striker is required to determine its type. The core may be cylindrical or lever. You should know how to perform the replacement of the cylindrical sekretki own.

The first necessary to dismantle bronenakladkami - protective plate of the locking mechanism. Then unscrew the screw in front of the door. He is the locking element. Repair door lock cylinder to be performed as carefully as possible, as there is a likelihood of damage to the locking mechanism.

After removal of the locking screw is required to get a cylinder. Installation of a new core is made quite easy. It is inserted in place of the old sekretki then carried out the same manipulations which have been described above, only in reverse order.

It is worth to remember that the new core should be identical to the broken sekretki. Otherwise, replace the item will not be possible. In some situations, you may need to complete replacement of the lock. Repair of doors with their hands is recommended to be done without haste. If after installing a new larva does not fix the problem, you need to re-examination, which will determine the nature of the problem more precisely.

How to repair the lock lever with your hands

Repair door lock cylinder in the lock lever is not possible. This is due to design features of the locking mechanism. At failure of the core lever locks is only one solution - complete its replacement. Before you begin, it is recommended to study the step by step instructions of this process.

The first step involves the replacement shift lever mechanism crossbars (through key). To replace the lock of this type, it is necessary to open the door. Then you need to unscrew the screws that hold the mechanism. They are located on the end surface of the door leaf.

In the next step extraction operate the locking device body and its replacement with a new mechanism. Then you need to fix a new lever locking screws (at the end).

Note! Many companies produce fabrics that simplify repairs entrance door lock metal in the apartment. They are equipped with a mechanism that can be repaired with the help of conversion levers. This option is much easier than a complete replacement of the locking device.

It is said that other kinds of mechanisms that do not have high reliability. Some of them do not have the possibility of replacement, as the sale of parts to meet suitable to them, it is impossible. For example, these mechanisms include cross-shaped larvae. Price repair door lock the door in this case increases as the device to be completely replaced. In case of failure of this element the best solution is to install a new lock.

Related article:

Front door: the installation of structures made of wood and metal

Preparation of the doorway and the door. Methods of fixation of the metal product. Finishing. Installation of doors in a wooden house.

Repair of metal entrance doors in apartment: How to eliminate squeaking

One of the most well-known problems associated with the exploitation of the iron entrance door is creaking. However, this problem is the most simple solution. To fix the canvas, which publishes the opening and closing the creaking sounds very simple.

The reason for such a problem - the friction that is generated when driving the canopy parts. To eliminate unpleasant sounds sufficiently lubricate the working parts of the construction machine oil. How to perform a repair entrance iron door in an apartment in this case?

First of all need to find a stand that must be put under the door. With wedge functions handle any solid object (e.g., stalk shovels). It is necessary to create a lever with which it will be possible to slightly raise the door, located on the hinges.

Next you need to apply engine oil or any other suitable lubricant in the slot near the hinge pins. That remains is to lower the back door. This procedure must be performed carefully. Do not rush, otherwise the door can come loose from their hinges.

Repair the input of iron the doorHow to adjust the canvas

Another common problem associated with the operation of the front door - skewed. To solve this problem, you need to adjust the structure. equalization process includes setting the loop, the offset which is often the cause sagging of the web. In addition, often requires adjustment of the other elements and fittings (lock, knobs and so on. D.).

The main tool to align the door, a building level. The modern market has a large range of budget structures. Chinese metal entrance doors are very popular because of their low cost. However, the quality of these products is poor. These are the doors more often subjected to misalignment.

Helpful information! If necessary, you can purchase a modern design, which has built-in mechanisms that would allow for the setting position of cloth.

Price Street entrance metal doors, installed in the apartment, determined depending on the size of the product, as well as build quality. Experts recommend purchase paintings belonging to the middle price segment.

When carrying out adjustment work is necessary to be very careful, because the wrong actions could lead to new malfunction. For each failure has its own solution to the problem. Before you begin, you need to find out the cause of improper functioning of the design and study the instructions to eliminate this type of fault.

Adjusting the inner loops on the set of the input metal doors

Inner loop is also called hidden. Such elements can be found on aluminum and steel webs. These parts are not visible from the outside, so the door on which they are installed, difficult to open. It is important to remember that there are three options for setting the internal loops, each of which has the direction of adjustment.

In some cases, the correction is made hidden door hinges? settings must be displayed in the case where a door loses its functionality. There are two common problems associated with the hinges. The first of them - grazing ludki web. In the second form of the problem between the closed door and the door frame is formed quite a large gap.

Often, many of the owners who have faced similar challenges, begin to think about replacing the front metal door. However, all these problems are fairly simple to fix. Enough to spend adjustment of the web. For this operation you need to prepare a hexagonal key 4 mm. In carrying out this work it is recommended to follow the following instructions.

First of all it is necessary to fully open the canvas. This will achieve maximum access to the screws, hinges, adjustment that will be made. If the blade touches the door frame, then it is necessary to tighten the screws. In turn, the existence of a gap between ludkoy and the web, on the contrary, requires the loosening of fasteners loops.

Price repair input steel door, who got off setting loops small. However, in this case, you can do all the work yourself. There are some nuances that are worth paying attention to. For example, if a door leaf touches ludku below, you will need to tighten the top hinge.

Note! During setup you need to get to the central fixing, fixing loop. This is done by first loosening the extreme fasteners, and then recessed. Hidden fixing parts can be cleaned from dust and apply grease to them. Next is screwing latching parts in reverse order.

The cost of repairing the castle entrance metal doors and hinges and other hardware elements can vary greatly depending on the nature of the fault. Raise a little, or, conversely, lower door is quite simple. To do this, the upper tighten and loosen the bottom screw (to decrease the level of the web) or carry out a reverse manipulation, allowing the lift door.

What if the metal doors sagged in a house or apartment

Shrinkage of the front door of steel or aluminum is due to active its operation. Of course, the possibility of shrinkage affects the material from which made the canvas. Quality Doors have a large margin of safety, and also have a more reliable hardware.

The most likely cause of this problem is the loosening of loops. Cause functional defects of this type can and ludki deformation. Sagging, arising out of the loop is eliminated quite simple. To do this, tighten the screws, fixing elements fabric accessories.

Do not forget that even the best metal entrance doors can sag over time. tightening bolts securing the loop, not always possible to resolve this issue. In the event that the door is not leveled, it is recommended to perform other actions.

Before you start correcting this defect is very important to conduct a preliminary examination of the structure. The important point is to compare the weight of the web and the loop strength. In order to fix the sagging front design, in some cases, you want to add another loop, as the 2 elements can not withstand the weight of the door. When installing additional fasteners necessary to pull back 15-20 cm from the top hinge.

Quite often, there are other problems in which there are difficulties in closing the door. In this case, correct the situation can be like pulling loops and replacing mounted facing the elements. The reason may be hiding in other hardware elements. For example, sometimes you want to repair the door handle - and the problem disappears.

Finally, another reason for the sagging doors can be ludki deformation. When choosing a new door leaf is necessary to choose the most suitable and safe box which can resist the weight of the door. Skewed ludki eliminated quite simple: with the help of the level required to align structure. It is important to remember that before you start to eliminate the skew is necessary to remove the door leaf.

How to eliminate the distortion of the door frame alone: ​​step by step guide

Identify the problem skew door design is quite simple. This failure is accompanied by a reduction in functionality and difficulties of opening and closing of the door leaf. When misalignment ludki required to make its alignment. If necessary, the structure is strengthened, which allows re-skew in the future.

The cost of repairing a metal door in this case is about 2000 r. Save this amount allows self-correction of the defect. In the first place, to carry out repairs on their hands, should determine the cause of misalignment.

What factors can cause this problem?

The large mass of the door. Metallic fabrics differ considerable weight. Quite often massive web contributes to changing the geometry of the door frame. The sequence of actions in this case depends on the degree of curvature ludki. Misalignment caused in the initial stage, is much easier to clean. To do this, you just need to pull loosened loop in the design.

Note! During repair of entrance metal doors with their hands should be understood that if the loops have lost their original shape, they must be replaced.

Depreciation loops. It comes as a result of long and continuous operation design. Fix this problem is quite simple - you want to replace parts, can not cope with its direct functions. However, there is a structure in which loops are welded to the door leaf. In this case, their replacement is complicated, as there is a need for pruning of old attachments.

Deformation ludki. This defect is also quite common. Problem is solved in the following manner: under the base box strut wedges inserted, then it is necessary to strengthen the structure by means of cement or any other reliable material. The risk of varying complexity, requiring repair, depends primarily on the value of the input metal doors, which determines the quality of its execution.

We should also say that the cause of the problematic closing cloth can be wear rubber seal. Replace it very simple. With this task will cope anyone who does not have special knowledge and skills building.

Restoration of the front door: How to deal with the metal corrosion

After Fitting metal webs it is recommended to paint. The paint layer helps protect the door from the destructive effects of corrosion. If we ignore this rule, with time on the outer surface of the door will rust. Most exposed to corrosion of metal structures, which are installed in private homes, as they have direct access to the street.

The most vulnerable area, which is most often caused rust - the lower part of the canvas. The solution to this problem is to carry out the restoration of the metal door. Consider the sequence of actions to be performed in this case. First, you need to prepare appropriate materials that allow to perform the restoration of paintings. These include:

• metal brush (for rust removal);
• brushes;
• primer;
• paint;
• solvent.

Following the acquisition of the necessary tools and materials you need to make preparations for the restoration of the door leaf. For this dismantling is performed fittings and the rubber sealing element and protection, which protects the inner liner.

The next stage of the restoration entry is a metal door rust removal by a metal brush. However, it is eliminated the old coating (if present). Next, you need to sand the surface and degrease it. These manipulations will help to prepare the canvas for painting.

Note!Some portions of the metal fabric can be severely affected by rust. In this case it may be necessary luting surface.

Then, on the metal web is applied primer composition. After that you need to wait some time to get frozen material. Next, the door color. Before the start of paint recommended to spread on the floor plastic film to protect its surface from enamel droplets. Coloring formulation without fail should be applied in 2 layers. At the end of accessories, dismantled at the preparatory stage, it is set in place.

Repair of the iron doorHow to fix the lining fabric

Decorative elements of metal constructions input often break down or simply wear out. If desired, they quite simply replaced with new cladding means. Most often, the following materials are used for facing the input panel:

• leatherette;
• laminate;
• MDF panels.

Each of these materials has its characteristics, respectively, and different embodiments of fixation. The cost of repairing the input metal doors depends on the price of the material, which will be faced with the surface of the canvas. To replace the old door trim their hands often choose leatherette. This is due to the fact that such material is easiest oblitsevat door.

One of the most presentable embodiments cladding input structure is artificial leather. The main disadvantage of this casing can be called the fact that it very quickly wear out and lose their decorative qualities. In addition, the artificial leather has a rather large cost.

Maximum protection for the metal structure from adverse environmental factors provides a special powder coating. However, the cause of his own hands is not possible, since it requires the use of specialized equipment.

Universal embodiment are panels made of MDF. Price repair input metal doors, made with this material is the smallest (except for conventional paint). In addition, it is worth noting that the MDF panels are easy to install. Thus, this option is best suited for the organization of skin with your hands.

Note! For metal doors facing optionally use materials which need fixing. To save time and effort, you can simply cover a canvas with paint.

When facing the metal web must be careful. Before you begin, it is recommended to execute the scheme, including the size of all the elements that will be installed on the door, and follow it. It will allow to exclude even the minimal installation error.

Repair of door handle Entrance metal doors

Door handle is one of the elements most prone to breakage door structure. In order to repair this item, relating to the fittings, you must diagnose the nature of the defect correctly. There are several common problems that arise during the operation of the element.

Some breakdowns that lead to the need to repair the front door handles, can be identified without disassembling the structure. For example, it often happens that one end of the spring element with fixing fittings flies place. Determine such failure is very simple, because the door handle in this case does not return to its original position after rotation.

Fix the problem caused by the change of the spring arrangement can be quite simple. To do this, it needs to pick up and put back into place. When spring break repair will not bring any results. In this case, the best solution is the replacement of the hardware element.

Before you buy a new pen, it is necessary to pay attention to another important point. The holes in the strip, which is designed for fixing must conform to the jacks on the door leaf. There are also other damage requiring repair metal door handles. Another frequent problem is with the problem of the tongue, which does not move when you turn the knobs and misses the desired opening.

How to repair a doorknob: static tabs

Most often, the tab does not move due to wear pen that becomes loose during operation. It is worth noting that the problem most often occurs in products made from soft alloys because they are more susceptible to deformation and wear. No displacement of the tongue indicates the flaring edges of the groove of the door handle. To eliminate such a failure, there are two ways.

The first method that allows to repair the front metal door handles, is temporary. He suggests seal the gap between the "squares" and the groove located in the handle. The second method is the most loyal and requires complete replacement of parts.

Another reason for the static tab doorknob - damage to the pin. The inexpensive locks the element is made of a soft alloy, which quickly wear out and fail. To fix this problem you need to buy a new rod and replace the old one.

Helpful information!In some cases, you may need to resize the pin, which is made by cutting and vytachivaniya.

hardware repairs require care. If necessary, you can always seek help from a qualified technician. Prices repair locks entrance metal doors and handles vary depending on the nature of the fault and the complexity of its elimination.

Repair of door handle with his own hands: loss of parts

There is a further breakdown of the door handle, which manifests its loss. It is important to remember that in this case the problem is fixed, so any failure of the devices are missing. The cause of the loss of the door handle is the weakening of the locking member (the ring) or its destruction.

Typically, such a failure occurs at low as component elements of the web. Buy metal doors, which price is too low, it is not recommended, since it often indicates a poor quality product.

The most problematic outcome is the destruction of the ring of the locking element. In this case, the repair mechanism is not possible. In turn, the weakening of the locking element, it is necessary to try to tuck it. This should correct the situation. Sometimes there can be problems with the biasing ring. For example, if it is made of steel, which has high strength and springiness.

Repair door lock apartments, communicating with the handle, it is best left to professionals. Self-correction of the situation could lead to even more serious damage. In order to reduce the possibility of failure, it is recommended to carry out routine inspections of fitting and lubrication. This will extend the service life of the door handles, lock, and other details.

Warming of the input metal door their own hands

Metallic fabrics are highly durable, but they do not cope well with the heat insulation function. Metal is a thermal conductor, so the doors of this material is very rapidly heated and cooled. This problem can be solved by mounting a heat insulator on the canvas.

Currently, there are quite a lot of insulators, which differ in their composition and structure. The materials used for thermal insulation of door designs, can be easily purchased at any supermarket building, on the market or to issue their orders via the Internet. It is worth noting that some of the paintings in particular need of organization warming. These include all the metal doors that are installed in private homes and have direct access to the street.

The price of entrance metal insulated doors may be different. The cheapest models cost about 10 thousand. rub. The cost of the more expensive designs ranging from 20 to 30 thousand. rub. There are also more expensive models, but they are buying is not feasible in most cases.

Note! Thermal insulation of the door frame is manufactured using foam (standard) and special sealing compounds. It is important to remember that literacy insulation requires sealing all voids between the door frame and the opening.

Warming of the input metal doors: milestones

The sequence of works on input fabric insulation primarily depends on its design features. For example, modern metal doors insulated internal method. Metal panels in this construction are fixed to the base by means of screws.

The process itself is not very complicated. Implement it on their hands can each person, but you must follow the instructions. At first need to remove the metal blade from its hinges and put it on a level work surface. Next you need to unscrew the screws that secure the metal panels and remove them. Inside the doors are located empty cell to be measured. They will be laid insulation.

Insulated metal entrance door does not freeze. Also, it condensate is not formed (due to temperature difference). This is a very important point, since moisture promotes corrosive destruction of the door leaf.

After removing the measurements required to cut the insulation, as foam or mineral wool which can be used for the required segments. Do not forget that you will need to cut the zone in which positioned door lock and peephole.

For fixing the heater onto the inner surface of the door leaf are most commonly used liquid nails. The remaining voids can be filled with conventional construction foam. After the work is necessary to collect the door and set it back on hinges. This variant is suitable for thermal insulation of new designs, which are fixed to the base by screws.

Price insulated metal entrance doors of street, which are of good quality, high enough. Therefore, a separate installation of the thermal insulation material is an excellent solution that allows to increase the functionality and service life of the fabric.

Repair of the metal fabric to be installed at the entrance of a private house or an apartment in the first place takes into account the reasons for the definition of failure. Some problems can be resolved in a few minutes. Of course, the need to understand the general principles of the construction of a metal door. It is said that if necessary, you can always go to a specialist, who quickly troubleshoot problems and also provide a guarantee.