Tile cutting machine with water cooling: Tips for choosing

In order to cut the tiles, there are special tools - Tile. Selection of this device depends on the intensity of use. If accepted to use an electric tile cutter with water cooling rather large volumes of work. This device allows to process not only ceramics but also granite. This article will discuss the main model and the characteristics of such products.

Tile cutting machine with a water-cooled: advantages

Devices that belong to this group are characterized by high efficiency and long operating life. System, the feed water includes elements such as a hose and a fluid reservoir. The pump mechanism water conducting fence, activated simultaneously with the cutting element.

Such cooling circuit allows to achieve two main objectives. First of all, it prevents overheating of the diamond blade. No less important is the fact that when cutting tiles conventional mechanical devices released quite a lot of dust. The use of water-Tile helps to cope with this problem, which makes the process a ceramic material processing more convenient. The dust entrained water particles immediately settle on the apparatus.

Under the work surface for cutting tile is a special container, the height of which can be different. It depends on the model with water cooling. Typically, this component is not more than 10 cm. Dust with water flowing over the blade, resulting in falls in this reservoir. For proper operation, it should be cleaned from time to time.

Mechanical hand held device (e.g., Sigma tile cutters) require force to the tile, and also protect from dust. In turn, the power tools to cope with this task. And also they can operate in standalone mode. In this case, the hose delivering water, joined with the container, which is located beneath the work surface.

The fluid motion in an electric unit is performed in a closed cycle. This allows you to use the minimum amount of it for a lot of work.

The apparatus and operation of the electric water Tile

The device has traditionally been a fairly large size. It is an adaptation of the stationary type and operates by connecting to the mains. To ensure maximum comfort when cutting tiles of his platform is located at a height of about 1 m. This allows the master to perform all the necessary manipulations standing, maintaining a comfortable position body. The distance from the floor to the desktop can be adjusted depending on individual preferences.

From the structural standpoint, such devices have certain similarities with circular saws. The device consists of several elements, including: an electric motor, the cutting circle and worktop frame. A tile cutter of this type is also equipped with a system of adjusting functional part and special latching devices.

Note! The primary cutting element in such devices are usually applied diamond blade.

The cooling system is functioning quite simple and allows the liquid over the contact point of the cutting device with ceramic products. Due to high quality diamond discs Tile, devices can be used for different materials such as ceramic, stone, concrete, glass, etc...

Varieties with water cooling Tile

To date, there are so many models of these devices. They are available in different brands and different from each other not only in appearance, but also on the technical characteristics. All e-Tile can be divided into two main types:

• hand;
• professional.

Manual. Such tools are simple and convenient construction. They can function as the electrical network and from the battery (battery). By the principle of action they resemble angle grinders, with the only difference that as a product for the treatment they used tiles.

The composition includes a manual handle Electric tile, the supporting element referred to as sole and the liquid reservoir. As well as the elements that allow you to adjust the position of the functional parts. Desirable to operate such a device only in the horizontal plane. This is due to the fact that, while in the vertical position, does not prevent the formation of dust. For more complex work, there are professional manual tile cutters.

Today, in the construction market can be met and a three-dimensional model, which runs on a battery. The main advantage of such devices - autonomy. They are a kind of transitional link located between manual and professional devices.

In turn, professional devices are classified on such grounds as the location of the motor. It can have two positions:

• above the working plane;
• below the working plane.

Devices with motor at the bottom. The main features of these models include the high quality of the cut, as well as good protection against dust during operation. The cutting element is represented by the same disk with diamond-coated. Design feature of this device - the location of the functional part. The upper half of the cutting wheel is above the working plane, and the bottom is placed in a tank of water.

Motor This position allows for compact equipment, which is characterized by versatility. These devices have a high popularity in the construction market is due to its small size. During repairs in the apartment is always difficult to find enough space for a large model.

Nizhneprivodnye devices can cut quite a large ceramics and other decorative materials. This is due to the fact that the working surface there is no limiting components.

Helpful information! Among the shortcomings of stationary models, which are at the bottom of the engine, it may be noted that while the cut is necessary with your hands to move the workpiece. Therefore, to work on this Tile is desirable to have experience.

Models with the motor on top. They belong to a professional Electric tile. Devices of this type have a rather large dimensions and different complex structures. For operation on an overhead water cooled Electrobar must have sufficient experience. All devices with a motor located in the upper part, are divided into two types:

• console;
• bridge.

In the first case, the machine is equipped with a console, which is fixed via special latching elements. The working platform of such a device is agile. Bridge Electrobar include a movable functional portion, which is moved by means of special guide elements.

Electric machine plitkorezny DeWaltD24000

An apparatus of this type is versatile. It can be used for cutting ceramic tiles and paving. A device is also often used for treatment of rock. design of the device includes two support members, which not only increases the precision of the cut, but also allows you to perform it at an angle of 45 °. To protect the cutting wheel, it is placed in a special housing.

The machine of this type is quite common in a small business. He is considered one of the best and Tile is able to perform quite a lot of work.

Accuracy of cut in such a device is provided by means of special guides. They are made of stainless steel, so is resistant to corrosive influences. Using such a machine allows cuts a length of 61 cm.

Water cooling system of such an electronic Tile includes dual waterjet channels. If necessary, their operation can be adjusted to optimum diamond disc received amount of cooling liquid. A device of this type is also equipped with a reservoir for collecting water droplets which are arranged behind and on the sides.

This apparatus operates on the network with a voltage of 220 V. Its power rating of 1600 Watts. Spindle speed - 4200 r / min. The apparatus is rather cumbersome and has a mass of 32 kg. Price Electric tile with water cooling of this type of averaging 64 to 000.

Note! DeWalt D24000 possibilities are wide enough. Apart from the usual longitudinal cuts, such a device is used for the organization of the holes for the outlet.

Electric Tile ZUBR ZEP-800S: Specifications

Such an apparatus is characterized good performance and includes in its construction an electric motor with an exponent power 800 watts. Like the previous model, this device is equipped with a water cooling system. All important elements of the machine, including the working surface of the table, made of stainless steel.

Cutting cladding materials can be produced by this device at different angles (0 to 90 °). The maximum length of cut is 53.5 cm. The device operates from the mains with a standard voltage of 220 V. Motor so Electrobar located on top, so it belongs to a professional group.

The rotational speed of the spindle element is 2950 rev / min. The weight of the apparatus is approximately 30 kg. Such a device is quite common and has many positive reviews amongst consumers. Price Electric tile ZUBR ZEP-800S ranges from 11,000 to 13,000 rubles.

Table Tile Practice Pro 1872

Such a device is a desktop and makes it quite quickly and accurately process tile. Display engine unit power is 72 watts. Of the features of the device can be noted is that it allows you to cut cladding materials without causing pre-marking. This is achieved through the parallel stop working plane.

Desktop model of this type is characterized by compact dimensions, it allows you to move it without any effort. The unit is adapted to cut products with a length not exceeding 30 cm. It operates from an ordinary electrical outlet with a voltage of 220 V. spindle rotation speed in this case reaches 2800 rpm / min.

Such Electrobar equipped with water-cooled and has a special tank for the liquid. With it, you can cut not only ceramic tiles, but also products of granite.

Practice Pro 1872 is small in size and weighs only 16.5 kg. Depth of cut type table device is somewhat less than the professional machines and is 20 mm in this case. How much does a tile cutter of this type? This unit can be purchased for 7500-8000 rubles.

Related article:

Handmade Tile: price, review popular models and the use of nuances

Mechanical and electrical manual tile. Overview of manufacturers. Tips for selecting and using.

Features Table Tile CORVETTE 460

This unit has a lot of positive qualities, so popular in the construction market. First and foremost it is worth noting its universality. The device can be used for cutting not only ceramic, but also paving slabs. The cut can be made in three positions: straight, angled, and combining the first two.

The apparatus includes two abutment embodiment: the parallel and angular. Such an electric motor Tile with water cooling is asynchronous. spindle speed rate is 2850 / min. Diamond disc protection is applied special casing. Indicator device power corresponds to its small volume and 600 watts. Works such a device on the network 200 with standard voltage V. It can be cut facing products of 36 cm length.

Approximate unit weight of 11-12 kg, which makes it convenient to transport and use. The average cost of the small-sized model is 4300 rubles.

Tile cutting machine RUBIND-180-BL Standard

Apparatus of this type has good performance and is generally used to perform quite a lot of work. The main advantage of the device - noiselessness during operation with facing materials.

Note! Using such a model can be cut facing materials at 45 °.

The basic materials which are processed in this device is a ceramic tile and granite. Due to the rip fence assembly is able to perform fairly accurate cuts.

Staffed tank for cooling of the diamond disc. Powered by the network voltage of 220 V. Maximum unit power of 550 watts. Due to the low weight (10 kg), convenient to carry. The average price of water Tile RUBI ND-180-BL is 6900 rubles.

Which is better to buy an electric tile cutter with cooling Tips

In the first place it is recommended to identify the purpose of the unit. This will depend on its cost and further selecting nuances. If you want to buy a device for single use, then it is best to buy a manual mechanical model. Electronic devices are more expensive, however, due to its characteristics have many advantages.

Which is better to buy a professional tile cutter? Consider what factors should pay attention when choosing such a unit:

Electrical parameters. Before purchasing the device, experts recommend to learn some stress is necessary for it to work. As a rule, in the home is not possible to use the models that require the indicator above 220 V.

The second important selection criterion, which also applies to electronic parameters - power. To work with thick ceramic tiles, or any other material will require the use of more efficient devices. The minimum power of the engine unit to be no less than 1500 watts. Such models are equipped with special diamond discs with a diameter of 35 cm (to increase the cutting depth).

If you need a device for processing the ceramic tiles of medium thickness, then his power shall be from 800 to 1400 watts. Diamond circle in this case will have a diameter of 25 cm. Cutting of standard ceramic tiles fit and less powerful devices.

In case of need to buy electric tile cutter with water-cooled, which includes a protective system. Some handheld models provide a mechanism that does not allow unintended startup. In practice, it is quite simple: two buttons which must be pressed at the same time that the unit has started to work.

Note! Before you buy a water tile cutter, carefully inspect insulated conductive elements. It should also be noted that some units require grounding.

Desktop settings. Depth of cut is selected, depending on tile thickness. It is advisable to select a model that takes into account the regulation of the blade. Table in some models whose motor is located below, has the ability to bend. This is necessary in order to process facing products at a certain angle.

Experts advise to pay attention to the unit based on the quality (frame). It must be made of durable, corrosion resistant material. From the working plane size depends on what size tiles can be cut on it. Good electrical Tile Surface should have a size of at least 60h45 cm.

water supply parameters. Devices in which the motor is located below, completed with the reservoir located beneath the work surface. Part of the cutting circle is at work constantly in it and thus cools. Master recommended to choose a model with a capacity of medium size.

Units with the top arrangement of the engine have a more complex cooling system. In this case, the water supplied from the tank to the cutting portion by a pump. Before you buy a professional electric tile cutter with water cooling is desirable to draw attention to the existence of filters for liquids. They are present not everywhere. Power pumping device, and other parameters of the water circuit is generally indicated in the appropriate documentation.

How to cut tile Tile water-cooled?

tile cutting - serious process, so before embarking on the work it is recommended to get acquainted with some nuances. All electronic units, which include a water circuit, have a certain sequence of cutting facing materials.

The functional part of the water Tile presented diamond wheel. The use of such a cutting element to speed quickly and accurately perform a fairly large amount of work. When the cut is necessary to remember that facing products need to move toward the disk.

Helpful information! It plays an important role is the material from which made tiles. The stronger the structure of the product, the more pressure is necessary to make on it during cutting. Experts recommend to gradually increase the pressing force during operation.

To avoid jamming the blade and minimize vibration percentage, it must be fixed on the table. The water that collects in the container during operation, gradually become dirty, so you need time to change it.

Pressure on the workpiece with the best of both sides. This will eliminate the chance of warping and chipping. In some cases, the diamond wheel may jam. And it does not depend on the unit cost and quality.

And, of course, do not forget about elementary precautions while working with such a tool. Safety allows for the use of special glasses to protect the eyes and headphones noise.

How to cut tile cutters angle: Recommendations

Processing of coating materials under the right angle is not very complicated. More problems and issues (especially for novice masters) is cutting tiles diagonally. It should immediately be noted that the manual models are not adjusted for such transactions, so you will need to use an electronic unit with a water circuit.

Changing the angle in such devices is performed by changing the position of the cutting head. For its fixing special screws are used. Depending on what kind of angles can be used when working with tiles, all Electrobar are divided into three types:

• cutting at right angles (90 °);
• allowing processing under two tiles fixed angles (90 and 45 °);
• operating in the range of from 45 to 90 °.

Working plane dimensions allow to cut tile not only standard sizes (30x30 cm), but the product length and the width of which amounts to 1 m. The long table is one of the characteristic features Tile professional. However, the different models differ from each other and, above all, you need to look at their performance.

When the cut diagonal tiles need to be very careful to avoid the risk of chipping. Experts do not recommend very strongly to press on facing products during processing.

Thus, there are several varieties of electronic Tile, each of which is selected depending on the purpose. If you choose this device is worth paying attention to its exterior elements. They must not be damaged. A study also recommended passport Electric tile. Reviews of different models can be easily found on the Internet at specialized forums.