How to deal with mold and fungus on the walls of the apartment, remedies

click fraud protection

Contents

  • 1 How to get rid of fungus and mold on the walls - the reasons for the appearance of
  • 2 Begin to fight mold in the apartment
  • 3 Effective means of removing mold on the walls:
How to get rid of fungus and mold on the walls of an apartment Photo

Fighting mold and fungus on the walls in the apartment. Effective removal tools.

On the plaster and wallpaper appeared black spots, from the walls it carries, like from a school rag, and looking in that direction is simply disgusting. Well, it's time to declare war;roll up your sleeves and move furniture. The fight against fungus and mold in the apartment is not immediate and rarely happens without disturbing the usual order of things.

How to get rid of fungus and mold on the walls - the reasons for the appearance of

To begin with, you should determine the possible causes of fungus. For, knowing the source of the problem, you can subsequently prevent the occurrence of mold. The first likely cause of the appearance of the fungus is excessive humidity. This is especially important in the cold period of time when condensate is collected on the windows. Moisture, accumulating on the windowsill, fills the cracks and joints, and evaporating - will fall on the slopes and edges of the walls. In addition, the appearance of fungus can contribute to uneven heating, poor ventilation and even an excessive number of domestic plants or aquarium. Thus, it is necessary first of all to provide a set of measures to eliminate the aforementioned shortcomings, and only then to fight mold and fungus on the walls and ceilings of the apartment or house. And the first thing that needs to be done is to ensure unobstructed air circulation in places where mold has appeared: first to move the furniture away from the walls and regularly ventilate the room. It is advisable to open the windows several times a day for about five minutes. This is especially important after hand washing or prolonged cooking. In the winter-autumn period, care should be taken to ensure that the heat from the radiators is unobstructed to the windows. Probably, for this purpose it is necessary to make small lattices in window sills. If the mold appeared in the kitchen or in the bathroom, then first of all you should check the functioning of the hoods and do not leave the bathroom door permanently closed. As for electric hoods, in the presence of such an extract, it is highly recommended to arrange additional ventilation.

Instruments
Widget from SocialMart

Beginning to fight mold in apartment

Fungal mold photo Fighting fungus on the walls is complicated, difficult and does not always end with unconditional surrender. However, not everything is so bad. It is necessary only to scrupulously find out the possible causes of the appearance of fungal mold and to outline a further plan of action. First, you need to determine the size of the "zone of defeat".If this is a small section of a wall or a window slope, then it can be limited to treatment with hydrogen peroxide or a bite. As a cheap method of struggle, all the known "Belize" or "Domestos" can be used. These are the simplest folk mold remedies on the walls of the .In addition, water-soluble formulations and antiseptics are popular, with White spirit or turpentine as a diluent. Sometimes the fungus is removed from the walls with creosote or a solution of copper sulfate, but recently these methods are considered ineffective. If nothing has helped, and the fungus has appeared again, then more determined actions are needed. There is no simple treatment is not enough.

Effective means of removing mold on walls:

One of the means of removing mold on the walls of the photo The first thing to do is to dry the affected area of ​​the wall. With a large lesion, it may be necessary to dry the entire wall. To do this, you must delete the wallpaper. Then use a stiff brush, or a brush to clean the metal, to remove the mold in all places where it appeared. It is necessary to clean it thoroughly, in order not to repeat the whole process again. If the gypsum plaster is loosened or crumbled - there it is necessary to clean the wall to the base, passing through the entire affected area. Only after a thorough cleaning process can you start drying the wall. For this purpose, a blowtorch( remember the fire safety) or a building hair dryer is suitable. Then you can begin to treat the wall with an antiseptic or other special composition that destroys fungi and bacteria, the benefit of their choice is now very wide. If the walls were completely cleaned of the plaster, then a wider range of works on the elimination of the fungus can be carried out. First, it is necessary to apply a mold remover to the wall. Then primetovat primer of deep penetration with antiseptic properties. Then prepare the waterproofing compound( prepared from the waterproofing mixture) and roller or brush, apply it to the wall, thus providing protection against dampness. Then it is necessary to re-primethe wall, using a primer of deep penetration and then proceed to plastering. As can be seen from the above, the fight against fungal mold is, in its essence, a complex of works and activities, the implementation of which can successfully cope with this trouble.

Specially for the construction site http://sdelalremont.ru

instagram viewer