Repair of parquet own hands

click fraud protection

Contents

  • 1 Beginning of floor restoration
  • 2 Boring and grinding of old parquet
  • 3 9 stages of repair

Repair of parquet in own hands Parquet floors are considered to be the best floor coverings. The new parquet is always well polished and has a varnish coating, it always looks beautiful and solid. But, time does not regret anybody. Parquet gradually deteriorates, crevices appear on it. It cracked, the plates began to crack. Replacing the old parquet with a new one is very expensive. It will be much cheaper to restore old parquet. Usually, it is necessary to restore the parquet once for many years. Everything depends on the conditions in which the parquet was used. The apartment repair site has prepared a short manual for self-repair of the floor.

The beginning of the restoration of the floor

To remove the tarnishing and loss of the color of the parquet, you need to use a grinder. Small scratches on the floor, easily repaired with putty or polishing. After the performed operations, the parquet should be covered with varnish or wax. If the parquet began to squeak, then it must be re-made. The creaking is due to poor laying of the flooring or the use of incorrect technology.

Parquet swelling may occur if moisture is ingested. Such damage can only be corrected in one way - by restoring the parquet. To replace the cracked or broken riveting, it is necessary to replace the broken parquet. For this, you need to completely remove the adhesive backing. Then you need to prepare and fit a new riveting in size. Carry out the filling with a special mastic that is the place where the riveting is laid.

After pouring, you need to install a rivet. On the riveting, you must put a heavy load, after removing all the mastic. Having finished all the work, it's worth doing a cycle. It will help to hide the replaced riveting. After the cycle it is necessary to grind the floor and varnish. The varnish must be applied in several layers. The coating will be strong if several layers of varnish are applied.

To ensure better adhesion of all layers, grinding should be carried out after each applied layer, except the last one. Working with varnish requires not to forget about safety. It must always be remembered that the varnish is flammable. When working with lacquer, the use of respiratory protection is mandatory. We must not forget to ventilate the room.

Punching and grinding of old parquet

In the old days the parquet was called the removal of the surface layer of wood. In our time, with the advent of new machinery and various grinding machines, polishing parquet became a cycle. This operation is carried out in several steps. Sanding the floor makes it possible to save the floor for a much longer time than simply removing the top layer. For the cycle operation, a wide variety of grinding machines are used. They can be drum, band, surface grinding and others. We have already figured out how to perform a manual cycle of parquet with their own hands, with the help of a cycle, get acquainted if necessary.

Instruments
Widget from SocialMart

polishing machines for parquet Initial grinding is the most rough. Here, everything depends heavily on the professionalism of the master. This grinding should be done without flaws, so that later pits and inconsistencies are not found. The flooring is carried out in the following sequence:

9 repair steps

1. The parquet is exposed to rough grinding. For such grinding use a special drum-type machine or surface grinding machine. The drum-type machine has a high performance, but requires high skill. Rough grinding removes all irregularities, removes all the old coating.

2. After rough grinding, thin polishing of old parquet is made. For it, disc surface grinders are used. Fine grinding clears the remaining irregularities and flaws.

3. The third step is to grind the most inaccessible places.

4. After all the polishing, all the cracks should be filled. It is desirable to apply the putty on the whole parquet, but only the cracks, chips and potholes can be putty. Putting putty on the entire floor, will require large financial costs. With a local putty, you can not notice the crack. There may be a discrepancy in color.

5. When the putty has dried, fine grinding is performed. It removes an unnecessary layer of putty, leaving it only in crevices and pores.

6. Before beginning to varnish the surface, do not forget to remove accumulated dust and debris.

Cover the parquet with lacquer 7. When the cleaning is finished, you can start painting the old parquet yourself with lacquer.

8. After covering the parquet with varnish for the first time, it is necessary to wait for it to dry completely. Then make an intermediate grinding. It will remove all excess pile and garbage. This grinding will improve the adhesion of the layers.

9. When intermediate sanding is completed, it is necessary to vacuum the parquet and polish it again. Parquet does not require repair, if it is properly installed. This parquet will serve for a long time and reliably, restoration and repair of the old parquet floor will not be needed in the next 10-15 years.

instagram viewer