3d panels for walls: plaster, bamboo, plastic and other

3D wall panels - a new word in the finish. With a totally unique interior of the kitchen can be created using these relief images, redraw space to add dynamism to it - so diverse three-dimensional effects and graphics on decorative plates. Today, they have become more affordable, so it's time to get acquainted with this amazing family of finishing materials and buy food for their original decoration.

The main types of

New technologies make it possible to re-create any texture, patterns and effects on the surface of the walls. However, the kitchen is an important choice of materials from which produced the 3D panel. After all, here they are constantly experiencing the detrimental influence of water, high temperatures and need to be cleaned regularly. To all the decor could stand it, you need to evaluate the material of its production in terms of practicality.

Gypsum

Most interior 3D-panels is made of plasticized plaster. He is non-flammable, environmentally friendly and allows you to create the most incredible and detailed images on the walls. But in the kitchen, you can use not all gypsum panels, because they are very afraid of the water. For such premises manufacturers of finishing materials produced separate collections, where each panel passes special processing hydrophobizing.

Plaster decorative products have an impressive thickness of 40-60 mm, plus relief, which increases this option tile twice. Standard panel size 60x60 cm, the price of one segment of about 1400 rubles. You can buy plaster elements smaller or larger, and even unusual shapes, but the cost per square of this will not change much.

Glass

The kitchen is allowed to use three-dimensional products made Tempered glass. They are practical and in the interior looked amazing, but the price of such models is very high - about 10 thousand. rub. / m². Full-size design panels can be bought for 40 thousand. That is why the decorative panels of glass is installed only on a small area, for example, in the work area instead of the traditional apron.

The standard thickness of 4-6 mm segments, since the material is heavy. Dimensions of plates will depend on the purpose and pattern size. As a rule, bathroom and kitchen (rooms very close) manufacturers suggest using the 3D panel, 20x30 cm. But available and larger tiles 60x60 cm, as well as whole panels of about 2x2.5 m. Even at the stage of production in them carried out all the necessary mounting holes, as after quenching their own drill without damaging the panel, not succeed.

MDF

As gypsum boards, MDF boards without further processing can not withstand contact with water. But if the mineral lining under its influence begins to sag, the pressed wood segments are inflated, saturating humidity. This problem is solved as easily as in the case of furniture made of MDF - by wrapping a thin plastic film. It is on the surface are required color effects, applied decorative patterns that imitate natural materials and textures and a large relief made directly to the MDF.

wood products cost quite expensive for families of moderate means: buy laminated MDF elements can be at a price of 4-5 thousand. rub. / m². But for 3D enamel panels for walls, photos that are even more impressive, will have to pay twice as much. However, due to paint the life of wood trim in the kitchen greatly increased.

Aluminum

Very durable material which provides additional protection decorative polymeric coating. With anti-corrosion effect, it permanently retains the beauty of the aluminum cladding, even under wet conditions cuisine.

Fire protection of metal panels also gives you the freedom to place them next to the hob. The price of such products begins with a 7000 per square. The maximum size of a plate, which can be purchased under the order - 1,2h3 m.

Bamboo

Cellulose or bamboo fibers are used to create Eco panels with raised relief. Outwardly, they are similar to plaster, yet is lightweight and easy to assembly dimensions (typically 50-50 cm or 30h80). On their wall can be fixed by means of nails or glue liquid-foam. Also bamboo finish allows painting in any desired color.

The thickness of the bamboo panel is small - 15-25 mm, and the price of comparable products from MDF (from 4600 to 5200 rubles per square). But for their installation in the kitchen will have to buy additional water-repellent paint or acrylic paint, which protects the decor of the excess moisture.

Plastic

Affordable and nekapriznye to install PVC panels are quite popular today. Outwardly, they are very similar to plaster, as too are cast in special molds to create a complex surface topography. However, in the kitchen it is better placed away from the "hot" areas. But the water is such a decorative finish is not afraid and is easily washed off any cleaning agent.

In fact, the choice of wall panels with three-dimensional effect is much richer. In addition to the already discussed finishes today you can buy and design options, simply amazing:

• carved wooden plates;
• elements of pressed cork skin basis;
• Acrylic segments;
• heavy-duty panels of granite.

There's even a built-in polymer compositions with LED backlight. Here, LED ribbon has a high degree of protection against moisture, so that the finished products are easy to wet cleaning and it can be used in the kitchen. The price of such a finish is dependent on many factors, which have already negotiate with the manufacturer. Say in advance what it would cost your design ideas, impossible.

Advantages and disadvantages

All 3D panels are very expressive relief, so they are not only visually, but also effectively reduces the free space of the kitchen. This should be considered when choosing a pattern and surfaces, which are planned to coat such an unusual material. The rest of the textured finish is almost perfect. Its main advantages:

• speed of installation - fixing large-format panels takes only a few hours. And MDF wooden elements are fixed by special locks, gypsum - in solution, finer pattern can be simply glued to liquid nails.
• There is no need to align the base - wall defects can be eliminated by using a thicker layer of adhesive, or installation of the mounting frame.
• Ability to self-decoration. 3D panels are like a part of the wall, which you are free to paint at will (better to buy water-emulsion composition) or varnish, increasing their resistance to moisture.
• Production of finishing materials to order - the service provide all manufacturers. In this square the price could rise by 20-30%.
• An additional effect of heat and sound insulation of walls, especially if you choose the thick wooden or plaster models.

Pros clearly more than minuses, so unusual decorative panels should definitely buy for the kitchen. However, we should not forget about the peculiarities of their use in the interior.

selection rules

Of course, everyone can choose the pattern textured panels to your taste, but it is important to remember that relief images significantly change the future and are able to influence the perception of space in whole. Therefore, the selection of patterns you should use the recommendations of the designers:

1. Use horizontally oriented images for visual extension of the short wall, and vertical - to adjust the low ceilings.
2. If interior style It requires the use of natural materials, look for plaster or bamboo panels with smooth lines.
3. In the classical kitchen 3D panel is best painted in one tone - picture and so noticeable enough, do not overload the space and emphasize it again and contrasting color. But patina or gold decor are quite appropriate.
4. Futuristic reliefs worth keeping for the hi-tech interior. If you must use them to carve out a portion of the wall painting may be in any color, suitable for the basic scheme. Otherwise the panel is better to choose a tone rest furnish or to resort to a sure version of metallic luster.
5. Abstract paintings look good only as an accent in a restrained and not too expressive interior, otherwise they will only overload the space.

manufacturers

WallArt - European brand, production capacity which is traditionally placed in China. This will reduce the cost of decorative materials and make them more accessible. The collections are well represented WallArt bamboo and reed 3D panel, characterized by its lightness and eco-friendliness.

Meister - German quality and practicality. This company offers products made of laminated MDF 15 mm thick. Excellent solution - connection piece elements with each other through a system of grooves. All panels are wooden Meister standard width 84 cm, height size range selected from 8, 10 or 12 cm.

Leto - domestic company that uses for the Italian decorative materials. The basis taken same cheap MDF board, but for coating them may be virtually any from PVC and paint films to wood veneer or fluorescent compounds.

Artpole - is not limited to only the MDF panels, and uses in the production of gypsum, polymer compositions, and bamboo fibers. The company has a very strong team of designers, so the 3D panel Artpole always pleased with unexpected solutions and an abundance of new products.