Kettle with temperature control: the advantages and disadvantages

shelves meet buyers plenty of equipment in different colors and sizes to suit every taste and budget. To stay afloat, it is advantageous to differentiate their products among all this variety and attract customers, manufacturers have to develop all new models and introduce modern technologies. Thus, to replace the conventional electric kettle reached kettles with temperature control.

What is the model with adjustment?

Normal maker heats the water to 100 ° C, and then turned off. In models with adjustable water can be heated to a certain temperature, without bringing it to the boil. What is it for? It is known that black tea must be brewed at a temperature of 100 ° C, red - 95 °, green no more than 80 °, yellow - about 75 °, white - 65-70 °. Subject to temperature welding will give its full aroma and flavor, otherwise flooded with too hot water will give bitterness. In kettles without adjusting the heating can only be determined approximately. Usually the hostess boiled water, and then allowed to cool to the desired temperature.

On models with the adjustment, the temperature can be set to within several degrees, and when the water heats up, pour it immediately in zavarochnik.

This tea is useful not only to fans of a variety of teas, but also to young parents in the preparation of the mixtures. Typically, the powder is required to raise a temperature of about 40 °, sometimes a little more, according to the package instructions. Parents have a cold dilute hot water or in a microwave oven to heat the bottle, constantly checking whether the predetermined mixture temperature and is not too hot for it is obtained baby. In the case of the kettle with adjustable everything is easier - to put enough on it 40 °, and when the water warms up, pour it directly into the bottle.

By the way, do not forget that many people, in principle, do not drink hot tea or believe that the double boiling not profit. For them, too, are ideal models with temperature control.

Advantages and disadvantages of kettles with temperature control

Their distinct advantage lies in the fact that if necessary the temperature can be set to within a few degrees. The disadvantages of, firstly, are the high cost of models with this function.

Secondly, these teapots are more likely repairs. It is known that the greater the electronics, the more complex components, the more frequent breakage, so over time the thermostat can fail: cease to maintain the desired temperature, the declared degrees will not match valid.

How to choose a tea-controlled?

Models with temperature control is selected in the same way as any other kettles. That is determined by a housing material (plastic, stainless steel, glass or ceramics). Estimate the volume: for a family of 3-4 persons Kettle 1.5 liters will be too small, and a two-liter per person obviously big. Watch the power cord length is convenient whether to hold on to the handle and are properly poured water from the spout.

Be sure to evaluate the design, because such a device is usually standing on the mind and can decorate the kitchen or on the contrary, look like an obvious obstacle. Determined by management: some models of temperature control buttons are located directly on the body, while others - on a special stand. Often on it as there is a small display that can be seen exposed degrees.

According to the method for setting the temperature kettles are divided into models with infinitely variable speed and control. Stepped thermostat allows degrees expose exactly and stepless approximately plus or minus 10 degrees.

Popular and inexpensive models

SUPRA KES-1801

This is a relatively inexpensive model with a step temperature regulator closed by a heating element and a capacity of 1.7 liters capacity of 2.2 kW. Case material - plastic, the lid opens automatically. Temperature indicators are in the form of five cups of different colors from yellow to bright red, each of which are written degrees: 40, 60, 80, 90 and 100. Kettle default after inclusion of the water begins to boil. When the temperature reaches 40 ° C, the first indicator lights - yellow cup when 60 ° - a second indicator, etc. Red maximum temperature light all the time will be flashing. When the water boils, kettle beeps twice, turn off temperature indicators and operation of the kettle.

To set the temperature below the boiling point, it is necessary to fill the kettle with water, set it on a stand, and then select the desired buttons degrees right / left. The indicator corresponding to the selected value will blink. After that, you can click "Start" and SUPRA KES-1801 will start to heat. When the water reaches the desired temperature maker will beep twice and turn off. maintenance of the heating function in this model.

Electrolux EEWA 5120

It is a small kettle capacity of 1.5 liters, with a capacity of 2.4 kW with plastic housing. The model comes with a continuously variable temperature control and automatic lid opening button. temperature indicators, only two: painted boiling cup and cup with warm water. The first corresponds to the boiling point, the second - the optimum temperature for the infusion of green tea, that is about 80 degrees. If desired, the intermediate value set, which will correspond to approximately 90 °. To warm the water to the desired temperature, it is necessary to fill the kettle with water, put it on a stand connected to the network and turn the knob to the appropriate indicator.

GoldStar GK-1744

This model comes with plastic housing, kettle 1.7 liter capacity, the power of the heating element - 2,4 kW. Kettle GoldStar GK-1744 is equipped with a step controller and temperature control function. All buttons and LEDs for easy output to handle. To boil it in water, it is necessary to fill the kettle and press the on / off button. During heating, the indicator will glow purple, and when the water reaches a temperature of 100 ° turns red. Thereafter Kettle emit several short beeps and shut down.

That the instrument has heated the water to lower values ​​to select the desired temperature scale: 80, 85, 90, 100 and then press the "inclusion". This model is equipped with a heat maintaining function for half an hour.

To maker did not give the water to cool below desired values, you must click «keep warm» and then select the desired temperature on the scale and press the "Power". If the first select thermostat temperature, and then simultaneously pressing the "Power On" and «keep warm», the first appliance boils water, and then it is maintained at a selected value.

Viconte VC-3231

This is another original model with a thermostat. The housing of the kettle is made of stainless steel in silver, blue or burgundy. Volume 1.7 liter model, PETN capacity - 2.0 kW. Indicators and temperature control button located on the handle. Degrees are set plus or minus buttons. One click - 60 LED lights with green backlight, two presses - 70 with blue backlight, three - 80 yellow backlit, four times - 90 with a purple light.

If you just need to boil water, then just press the button "Power", a kettle will heat it to 100 ° C, beeps and off. If the button is kept pressed for 3 seconds, then the device enters a temperature maintenance mode. Unlike most of these models will support the kettle water not heated 30 minutes and 2 hours at 85. The corresponding indicator will light during this time.

bugatti Vera

Take, for comparison, not one of the low-end models and makers of premium, the value of which at the beginning of 2015 exceeded 20 tons. P. How is it different from their counterparts for 1-2 thousand? Maker comes a volume of 1.7 liters, the power of the heater - 2,4 kW. Attention is drawn to the unusual design - high grip on the control panel perfectly straight, while metal housing is tilted relative to it by a few degrees. The models under this brand are 11 different colors, some of which are green, pink, orange and others. This kettle is equipped with temperature control and display.

Before work on the display the set temperature is reflected, and during and after the operation - the current within the device. The temperature can be set in increments of one degree from 45 ° C to 98 ° C. Thus the tolerance of ± 30 setpoints. In addition to temperature maker monitors the water level. Flashing «ml minimum» will mean that the water level is too low for boiling and needs to be topped up. Levels of 1250 ml, 1500 ml and 1700 ml withdrawn on the handle as the corresponding blue indicator strip. When the water will reach, they start to flash to the appropriate level.

In this model, there is no temperature maintenance function, but there is a delay of the start and the clock.

The device can be programmed so that it was involved at the right time, and the clock just let you keep track of time on the teapot. For all other functions of the Bugatti Vera does not differ from their budget counterparts.