How to paint a wooden window

click fraud protection

Although the majority of builders and owners of housing recently prefer metal-plastic windows, wooden structures have not lost their relevance. Wood is a natural material, has a beautiful appearance, environmentally friendly. The disadvantage of wooden windows in comparison with metal-plastic is that they require constant maintenance. If PVC profile is enough 2-3 times a year to wipe with a damp rag, then the tree, in addition to cleaning, must be protected from pests, moisture, direct sunlight. Otherwise, the service life of the wooden window is markedly reduced, the frames are destroyed, their integrity is broken, which causes heat loss in the room and moisture inside. That this does not happen, the tree must be constantly inspected.

Contents

  • Required tools for operation
  • Preparing for operation
  • Putting the surface of the window before painting
  • Painting the window with your own hands
  • How to paint the windows: video

In case of destruction of the paintwork, it must be repaired, the broken hardware must be replaced, like rubberseals, the service life of which is small. On how to paint wooden windows with your own hands - on.

Necessary tools for the work of

4okno

In order to paint old wooden windows, it is necessary to stock up a special tool and materials. It is desirable that everything you need is always at hand, in the work area. This will significantly reduce the running time.

Consumables for this job will require:

  • Primer.
  • Putty.
  • Paint.
  • Thinner and White Spirit.
  • Rags for cleaning the window frame and window frames from dirt and dust.

The tool is guaranteed to require:

  • Spatula.
  • Brushes and paint roller.
  • Abrasive coarse-grained paper.
  • Grinding machine or drill with a nozzle for surface grinding.
  • Painting Scotch tape.
  • Hammer, chisel.
  • Ladder, or other stand for high-altitude work.

It is necessary to remember the means of individual protection. The work of cleaning the frames from the old paint and grinding the surface can lead to the ingress of foreign objects into the face and eyes, therefore, they need to be carried in goggles or a mask. To prevent paint from getting on the skin, apply it only in special gloves. Work should be in a well-ventilated room, because a pair of acetone, a solvent and other chemicals can lead to poisoning.

Preparing for operation

painting-wooden-windows

The most suitable time for painting the windows will be the middle of spring or the beginning of autumn. At this time there is no strong heat, which means that the paint will not crack from rapid drying. In addition, during this period, the probability of rains significantly decreases, due to which the humidity of the air decreases. This allows the paint to dry evenly. Warm weather will allow you to easily remove the sash of the window and do all the necessary manipulations with it.

19okno

Preliminary work:

  1. Wooden windows must be carefully dismantled from the frame. In some cases, they are very poorly removed from the hinges( especially if they are rarely opened).If this happens, you can not tear them off using the mount, you can damage the frame. It is necessary to unscrew the hinges from the frame, and remove the flaps with them. Then they are simply changed. The same applies to the rest of the hardware. It should be dismantled for the time of operation with the flaps.
  2. The windows are then dismantled. To do this, it is necessary to carefully remove the glazing beads. This is done with a flat screwdriver. Shtapiki, if they are not damaged, they are painted and installed in place. In case of damage, they are changed.
  3. Remove the old paint layer from the removed leaf. A scraper is used for this. In particularly difficult cases, you can use a grinder or a drill with a special nozzle. However, it is necessary to work with electric tools very carefully. At high speeds, a large force can damage the surface fibers of the wood.

utepljaem-derevjannye-okna-na-zimu1

Currently, there are special liquids for the removal of paint. As a rule, they are used to work with the surfaces of car bodies, so you can buy it in auto chemistry stores. The liquid is applied to the painted surface and after a certain time, when the paint wrinkles, remove it with a spatula. Then the residues are sandpapered.

Some specialists use industrial hair dryers to remove old paint. The paint under the stream of hot air melts and is easily removed.

Putty on the surface of the window before painting

no_8

After removing the paint, you must carefully inspect the surface of the frame. All metal parts of the frame( hats nails, screws) must be treated with a primer for metal. This will prevent the appearance of rust, which will adversely affect the condition of the wood.

After this, it is necessary to conduct antiseptic surface treatment. For this, many means can be used, of which linseed oil or linseed oil is most often used. Such treatment can prevent rotting of the tree and negative effects of insects. After treatment antiseptic must be dried. This process can be delayed for a couple of days.

When the frame dries, it needs to be treated with putty. This is done in order to level the surface before painting. Shpaklevku carried out gradually, not allowing the imposition of a thick layer. Otherwise, it will peel off along with the paint. For this work it is necessary to use only special putty( on wood) on an acrylic basis. Sell ​​it in finished form in small banks. When further painting the surface of the ready putty just applied to the surface. If the window is opened with stain, the mixture must be diluted with a special color. If this is not done, the places of its application will show through the stain.

Apply putty with a spatula in places where it is necessary. After the first layer has dried, it needs to be sanded with sandpaper, then remove the dust with a damp cloth. The frame is again subjected to a thorough examination, and where there are irregularities, another layer of putty is applied. The process is repeated until the surface becomes absolutely flat.

ae745c1386667bdbff53e50b2eb020d2

After finishing the work on leveling the surface, you can proceed to the next stage - the primer. Apply primer for better adhesion of paint to the surface. To paint the primed frame, the paint consumption will be much lower than on the "wet" surface. In addition, modern primers are quite high-tech mixtures that have antiseptic properties. They are able to protect the tree from mold, fungus and insect pests. The main task of the primer is to preserve the unique structure of the tree. That is why the material for metal processing for painting a wooden window is not suitable.

Before beginning the priming of the window, the surface of the frame is degreased with White Spirit. Primer is better to apply with a brush, and try not to miss seats. Otherwise, after painting, they form dark spots. If this happens, the painted surface will have to be cleaned again, primed and painted.

Window painting with your own hands

54914074

After the primer has dried, you can proceed to the final stage - painting the window.

In order to paint old windows, use water-acrylic paint or alkyd enamel. These materials are characterized by excellent moisture resistance, elasticity, resistance to ultraviolet radiation. Now in stores a large assortment of paints for wood of both domestic and foreign manufacturers is on sale. The choice depends on the ability of the buyer. In case of application of materials of leading world manufacturers, the cost of repair can increase at times, in comparison with the use of domestic analogues.

Painting-wood-windows

Work on painting:

  1. Before starting work, the paint must be mixed thoroughly to make it homogeneous. It is advisable to pass it through a metal sieve so that no lumps form on the smooth surface.
  2. The first layer - impregnating, should not be too dense. Its task is to penetrate deeply into the structure of the wood and, together with the primer, create a reliable base. To dilute the paint, use a solvent. After finishing the application of the first layer, it is allowed to dry completely.
  3. As soon as it dries, you can start applying the second layer, which is thicker. This is done to avoid staining the paint. If they have already turned out, they are removed using a rag soaked in a solvent. The leftover sweating will have to be cleaned with sandpaper and re-painted.
  4. Brush when painting can not be dipped entirely, it can absorb too much paint. Having lowered its tip in a bath, it is necessary to squeeze out excess of a paint about its board. The painting starts from the outside of the window. The movement of the brush should be along the fibers of the wood, in which case the paint will lie down in a dense layer. The corners are painted with short small movements.
  5. It is advisable to have several brushes for painting work: wide - for flat surfaces and narrow - for hard-to-reach places.
  6. After finishing the application of the third layer, the window is left to dry.
  7. Then you can install glass and accessories. The glass is installed on the acrylic sealant. It is applied to the frame and the glass is inserted. If the sealant is abundant, its excess is removed with a solvent. This step will greatly increase the energy efficiency of the window. The glass is pressed with glazing beads. Now the flap can be installed in place.

If all the work is done according to the technology, the old window will acquire an excellent appearance and will last for a long time.

How to paint windows: video

instagram viewer